To whom it concern:

I am an ambitious and resourceful Electro-Mechanical Engineering Technologist. I am looking to obtain a permanent, full-time position at Crosslinx Transit Solution within the near future. My intention are to utilize all my skills and knowledge pertaining to my field and to develop new ones while working at Crosslinx Transit Solution. Some skills I have to offer which may benefit the company are:

PLC Programming

Electrical Theories and Principle

Robotic Programming

Power Fluid Systems

Mechanical Theories and Principles

Industrial Networking

As you can see, with my knowledge in these areas, I am looking to assist Crosslinx Transit Solution in moving forward in its area(s) of expertise. I am detail oriented and have great technical report writing, communication and mathematics skills. I enjoy working with others and collaborating with colleagues to take on projects, and solving problems within the team environment. I am also very familiar with Bombardier quality of production and work expectations in regards to the Canadian Ministry of Transportation while working for the Bombardier Transportation (Rail) sector. I have been described as hard working, determined, reliable, trustworthy individual that has demonstrated leadership capabilities. I am always willing to learn new things to further expand my knowledge in the Engineering field and to experience new challenges.

This cover letter and attached resume represent how I may be of value to Crosslinx Transit Solution. I welcome the opportunity to hear back from a representative of the company to discuss the possibility of joining the Crosslinx team. So please feel free to contact me to discuss my skills in more detail. Thank you for taking the time to read this cover letter and my resume, and I hope to hear from someone soon.

Warm Regards.

Dwayne Weller

14 Parkside Drive

Brampton, ON L6Y 2G9

Cell: 647-***-****

E-mail: addd6f@r.postjobfree.com

DWAYNE WELLER

14 Parkside Drive Brampton, Ontario L6Y 2G9

Cell: 647-***-**** E-mail: addd6f@r.postjobfree.com

Objective

As an Electro-Mechanical Engineering Technologist: Automation, my goal is to obtain a permanent position where I can utilize my mechanical, electrical, software, and networking knowledge, skills and experience at your place of occupation.

Key Skills and Qualifications

Designing:

Experience in technical design for two years during high school.

Proficient in Electrical and Mechanical design using AutoCAD and SolidWorks.

Electrical:

Experienced in troubleshooting and testing electrical circuits and components.

Knowledgeable in Control Circuits, Electro-Mechanical devices, Sensors, Electrical/Electronic devices, Motor Control, Panel Wiring and AC/DC Circuits.

Familiar with the Canadian Electrical Standard Code book.

Programming, Communications and Industrial Networking:

Experienced in C++, Visual Basic and Programmable Logic Controllers (PLC) programming.

Most Familiar in Allen-Bradley, Siemens and Omron hardware and proficient in using

RSLogix 5, 500 and 5000; RSLinx; RSLogix 5000 Emulator, Tia Portal software and CX-Programmer.

Knowledgeable in industrial data communications and networking.

Industrial Robotics:

Knowledgeable in programming, controlling and operation of many industrial robots.

Familiar with various robotic brands such as Motoman, Wittman, Kuka, Fanuc and Panasonic.

Fluid Power and Power Transmission:

Skilled in setting up and operating hydraulic/pneumatic systems and components.

Motors, Pumps, Cylinders, Valves, Meters and Directional Control Valves (DCV’s).

Clear understandings in power transmission mechanisms and devices, such as Belt Drives, Chain Drives, Timing (Synchronous) Belts, Gear Drives and Cams.

Industrial Machine Shop, Equipment and Instruments:

Familiar in operational uses of Lathes, Milling machines, and Drill presses.

Familiarized with instruments such as Vernier Calipers, Micrometers and Vernier Protractors.

Manufacturing Processes and Welding Application:

Familiar with manufacturing processes.

Knowledgeable in different welding applications and techniques. Such as Oxy-Acetylene Welding and Cutting, MIG (Metal Inert Gas) Welding, Plasma Cutting, Shielded Metal Arc Welding (Stick Welding), TIG (Tungsten Inert Gas) Welding.

Control Systems:

Knowledgeable in motion control systems and their theories. Such as, open-loop and closed-loop systems, Modes of control, First and Second Order systems and Block Diagrams.

Key Skills and Qualifications Cont.

HMI Programming:

Proficient in HMI setup, programming, network configuration, and developing PLC databases.

Excel in using FactoryTalk View Studio, PanelView Component Design Station and Omron NB-Designer Software.

An Associate Member of O.A.C.E.T.T. in the process of becoming a C.E.T.

Safety/WHIMIS.

Education

Humber College (North Campus) [Toronto, ON] September 2010 – December 2013

Electro-Mechanical engineering technology: Robotics and Automation Profile.

Central Peel Secondary School [Brampton, ON] September 2006 – June 2010

Received my Ontario Secondary School Diploma (O.S.S.D).

Work Experience (From most recent to least)

Bombardier Transportation (Rail) - Eglinton Crosstown [Toronto, ON]

Product Introduction Technician - Electromechanical Technician.

April 2019 - Present

Perform job modification on all Light Rail Transit cars, both mechanical and electrical. Based on the modification documents provided by methods and engineering.

Perform the necessary troubleshooting to allow the proper functionality of the LRT as if they were to be in service. Both Electrical and Mechanical.

Perform PAC and receiving snags on the cars after they were delivered to our locations. Both electrical and mechanical.

Specialized in troubleshooting/maintenance and functionality of single and double door operation.

Familiarized with in-training procedure of the BTP - 9000 testing and commissioning of the Light Rail Transit cars.

Up hear to the required safety standards to perform all jobs accordant: Lock-out Tag-out while working on, below or on the roof of the cars. Also LOTO to the OCS while working on roof of the LRT’s. Wearing proper PPE's (Gloves, Goggles, Hard hats, etc..)

Provide documentations for all jobs. Filling out the proper work orders for every, snags, mods, or related 9000 testing assignments are completed to Bombardier and Crosslinx standards. Fill out the required risk assessments for all new jobs to uphold to the safety standards of Bombardier and Crosslinx Transit Solution.

ABC Group Salga [Toronto, ON]

Maintenance Technician. July 2017 – April 2018

Repair and maintain blow molding machines, auxiliary fixtures and trim presses associated to the production process.

The area of work being conducted were electrical, mechanical, hydraulics and pneumatics

Provided repair and maintenance on grinders for each individual blow molding machines and their associated conveyors.

Frequent control operation of Motorman robots.

Documented all maintenance job for each shift.

Eaton International [Mississauga, ON]

Product Specialist. February 2017 – May 2017

Designed electrical drawings for motor control and mining system panels for various customers.

Selected and ordered components that were necessary for completion of work orders.

Generated required document package for the completion of the orders.

Chairtex International [Mississauga, ON]

Automation Technician. November 2016 –February 2017

Assist in production by overlooking the proper functioning many machinery .

Operate Motoman SB6 and SKB6 model robots for welding application.

Perform changeovers on all equipment’s when required.

Repair machinery when there is a breakdown.

3M Fall Protection [Brampton, ON]

Maintenance Mechanic. July 2016 – August 2016

• Worked as a Maintenance Mechanic

• Maintain and perform preventive maintenance on company sewing machine and equipment, both electrically and mechanically

• Document all maintenance jobs for every shift.

Sons Bakery [Brampton, ON]

Maintenance Mechanic. June 2015 – June 2016

Worked as a Maintenance Mechanic.

Perform preventive maintenance and repair on bakery machines and equipment. Electrically and Mechanically

Document all maintenance jobs for every shift.

Brican Automated Systems Inc. [Brampton, ON]

Junior Electrical Designer/Controls Programmer February 2014 – April 2015

Worked as a Junior Electrical Designer/Programmer.

Programmed automated machinery.

Assist in design drawings and submittals.

Assist with electrical and mechanical assembly.

References are available upon request.

DWAYNE WELLER

14 Parkside Drive Brampton, Ontario L6Y 2G9

Cell: 647-***-****

E-mail: addd6f@r.postjobfree.com

Contact this candidate