Industrial Maintenance Millwright
Resume:
Jerry Williams
Georgia/Boilermaker
Macon, GA ***11
***.*****@*****.***
Professional Summary
To obtain a position within this company that will utilize my skills as well as enhance them, this will contribute to the growth of this facility and my own personal growth. Willing to relocate: Anywhere
Authorized to work in the US for any employer
Work Experience
Maintenance millwright Machanic
Interfor Corporation-Perry, GA
April 2023 to Present
Doing preventive maintenance on all machines and loaders and forklifts and Doing pm,s on machines and some welding and fabing. Changing out sprockets, gearboxes, belts, motors,bearing,chains hydraulic lines and other jobs as needed.
Mechanical Millwright
Prince Service and Manufacturing-Macon, GA
February 2022 to Present
Working out in the field at different papermills and companies around ga. Doing mechanical installation Working on all types of machines, Doing pipe work, rigging, replacing Barrons, on I'd fans hanging iron, doing fab work and alinement you name we do it.motors,pumps, conveyors belts,fitting pipe and structural.
machanical millwright
QLM Catalyst-Perry, GA
March 2020 to Present
Installing different types machines, rigging and flagging Crane, operating overhead cranes, and other duties as needed.
machanical installation
Aerotek solar-Jeffersonville, GA
October 2019 to Present
wiring solar panels, Hooking up massaging wire and BLA wire, and sitting up LPD boxes, and QC panels after installing and bombing guardrails and swigging, and other duties as needed. Maintenance millwright Machanic
Profile products-Monticello, GA
April 2022 to December 2022
Doing maintenance work on all machines and pm,s as needed. Changing out motors,gearboxes, fixing chain braeks,Changing out sprockets,,belts, bearing and other parts as needed, some fading and welding and other duties.
Industrial Maintenance Mechanic
Trillium Construction/ shurling williams-Atlanta, GA January 2021 to March 2021
preventative maintenance, on all lines and machines, rebuilding pumps, working on conveyor belt, on radio call. when lines go down, getting lines and machines back up and running, working on gearboxes changing out 2phase motors, working on spokittes and other duties as needed Rigging, Millwright
Cianbro Construction-Maine, NC
July 2019 to September 2019
rigging and flagging crane and also bull rigging pipe and other duties. Boilermaker
CraftForce-Evansville, IN
April 2019 to June 2019
Working on boiler on tubes. On cut out, and milling and prepping tubes to be re installed and also installation of the metal on the boiler and also working on heat exchanger and the layout and cutting of flat metal to be installed in the ash burner.
Turbine machanical millwright
Zachary Construction-Savannah, GA
August 2018 to December 2018
Doing coupling inspection and changing out pumps and putting in new filters and purging.and also replacing expansion joints on incoming and outgoing water lines and working on turbine on all valves and pumps including All stop valves and cleaning and miking all parts and installing them back in.. Maintenance Millwright
SHAMROCK SERVICES LLC-Dublin, GA
June 2018 to August 2018
Fabling handrails,gaurds, platforms, changing out bearing, and doing cup lens inspection and alinement, installing chippers and granting and repairing other moters,pumps, and other machines. Georgia/Boilermaker
Zachary-Newnan, GA
March 2018 to May 2018
Repairing duct work, fabling flat metal, using metal cutting saw, working in boiler on boiler tube clips and working in cooling tower-ash burner, grinding and welding cracks, fabling and fitting hand rails. Rigger/Signal person
Zachary-Fort Lauderdale, FL
February 2015 to November 2017
Hung iron and other materials, install pipes and ports, rigged and flag cranes, load and unload trucks. Machanical rigger
Clyde Bergerman-Louisville, KY
May 2014 to November 2014
Mechanical Rigger
Installing poppers, install tunnel veins, spiders, and rigging and flagging cranes. Lead Iron Rigger
KBR
September 2012 to May 2013
Hung iron and other materials, install pipes and ports, rigged and flag cranes, load and unload trucks. Lead iron rigger
Robbins and Morton-Charleston, TN
February 2011 to August 2012
Iron Rigger
Hung iron, and other materials, install pipes and ports, rigged and flag cranes, load and unload trucks. Boiler Maker/Rigger
Amec (GSC)-Valdosta, GA
August 2010 to December 2010
Installing duct systems, bolting splices, hanging pipes braces, fitting barren sliders, fitting and setting expansion joints, rattling bolts, setting turning veils, cutting and fabricating metal, using cutting torch, tack welding, using chain falls and come along, using portable power jacks and rigging, hanging boiler walls, and signal man for cranes.
Boilermaker/Rigger and Signalman
BE&K-Juliette, GA
January 2009 to February 2010
Heavy rigging and setting ducts, panels, braces, iron and other materials as needed. Signalman for cranes 75-210000 tons.
Boilermaker
Amec-Carrollton, GA
2008 to 2009
Installing duct systems bolting splices, hanging pipe braces, fitting barren slider and building ducts. Boilermaker/ Rigger
Fluor-Carrollton, GA
2007 to 2008
Heavy bull rigging, installing duct systems bolting splicer, hanging pipe braces, fitting barren sliders, fitting and setting expansion joints, rattling bolts, setting turning veils, cutting and fabricating metal, using cutting torch, tack welding, using chain falls and come along, using portable power jacks, and rigging.
Boilermaker
PMSI-Louisville, KY
2004 to 2007
Installing bulk stages, fitting and setting overturned post, installing gusset plates, grinding, cutting, and measuring, rigging and tack welding.
Millwright
Williams-Jacksonville, FL
2003 to 2004
Removing and installing burner tubes, setting expansion joints, installing conveyor, installing handrails and grating Rigging and hauling heavy materials.also working on motors and gearboxes and installing bearing, and working on pumps and setting machines and etc.also installing valves and fabing platforms and installing handrails.
Sheet Metal Craftsman/Roofing
L. E. Schwartz and Son-Macon, GA
2000 to 2003
Responsibilities includes laying deck, water shield, felt, copper panel, shingles, hanging copper, flashing, running gutters and down spouts, and ironwork and rigging. Education
High school or equivalent
Northeast High School-Macon, GA
1979 to 1984
Math, science, social studies, health, (Diploma)
Northeast-Macon, GA
1979 to 1984
Upper secondary education
Skills
• Conveyor installation
• Concrete finishing
• Mechanic
• OSHA
• Power tools
• Interpersonal skills
• Decision making
• Equipment malfunction troubleshooting
• Industrial Maintenance
• Welding
• Supervising experience
• Manufacturing
• JOURNEYMAN boilermaker.
• Hydraulics
• Troubleshooting
• Press Brake Machine
• Construction
• Facilities maintenance
• Facility inspection
• Customer service
• Working on construction projects
• Assembly
• Carpentry
• Microsoft Powerpoint
• Service technician experience
• Safety equipment
• Management
• Fabrication
• Delivery driver experience
• Residential building maintenance experience
• Emergency preparedness procedures
• Field service
• Office building facilities maintenance experience
• Lifts and hoists
• Maintenance
• LOTO
• Warehouse experience
• Janitorial experience
• Hand tools
• Drywall
• CGMP
• Programmable logic controllers
• Fire safety procedures
• Equipment installation
• Soldering
• Mechanic Experience
• Measuring instruments
• Automotive Repair
• Microsoft Excel
• Heavy Lifting
• Outdoor work
• HVAC
• Time management
• Electrical systems
• Sheet metal
• Customer relationship management
• Plasma Cutting
• Machining
• Handyman
• Microsoft Word
• Material handling equipment maintenance
• Boiler
• Mechanical assembly
• Basic math
• Ohmmeter
• Facilities equipment maintenance - Facilities equipment maintenance experience (6-10 years)
• Cleaning equipment
• Precision measuring instruments
• Commercial cleaning
• Mechanical troubleshooting
• Microsoft Outlook
• Conveyor systems mechanical work
• Industrial mechanic experience
• Leadership
• Pipe threading
• Industrial equipment
• Painting
• Mechanical Knowledge
• Driving
• Equipment Repair
• Millwright
• Microsoft Office
• Attention to detail
• Plumbing
• Facilities emergency maintenance
• Mechanical systems repair
• Mechanic experience
• Blueprint reading
• Stick welding
• Maintenance Connection
• Analysis skills
• Personal Protective Equipment (PPE)
• Custodial experience
• Communication skills
• Organizational skills
• Facilities corrective maintenance
• Construction management
• Forklift
• Root cause analysis
• Conveyor
• Computer literacy
• Gearbox repair
• Certified rigger
Certifications and Licenses
NCCER
August 2009 to Present
Rigging, also have taken on, just finished advance book but have not tested yet. Flagging
February 2009 to Present
Flagging Crane's,lifts, traffic, etc.
OSHA 10
March 2008 to Present
Safety.
Driver's License
EPA Universal Certification
Journeyman License
Hoisting License
Aerial Lift Certification
Valid Drivers License
Twic card
October 2019 to October 2025
traveling workers identification card..
DOT Physical Certification
OSHA Safety Certification
CPR Certification
First Aid Certification
Non-CDL Class C
Forklift Certification
Additional Information
Licensed JLG operator
forklift
• Boom Lift
• Cutting Torch
• Tack welding (not certified)
power tools
Rigging
• Heavy rigging
• Bull rigging
• Ability to lift over 100lbs
Good Fitter
• Structure
• Pipes
• Achievement
Boilermaker
• Boiler walls
• Boiler tubs and clips
• Ash burner
• Cutting saw
Heat exchanger
Skills
Some computer skills Multi-crafted
NCCER for Rigger plus Journeyman boilermaker also multi Craftsman. Mantinaces millwright. also I'm a member of local 378 IW union.have my subpart training and my operator training..
Contact this candidate