Roy Spencer

Everett, WA *****

adufjj@r.postjobfree.com

+1-425-***-****

Position as an Aircraft Mechanic person utilizing mechanical expertise, strategic application, and analysis to build innovative products and increase customer base/ profits.

Authorized to work in the US for any employer

Work Experience

FedEx Express

- Everett, WA

May 2022 to

present 2022

Package Handler

Warehouse/ Materials Handler/Shipping & Receiving Experience. Loads and unloads receive delivery of ordered supplies, materials, and equipment at the loading dock with freight. Packs and crates materials for shipment; Performs custodial duties in keeping storage facilities clean. Operate forklift and related material handling equipment complete receiving reports and forwards purchase orders. Stores stock material in the appropriate storage location. Participates in monthly and annual physical inventories, packs, and creates materials for shipment. Follow oral and written instructions Amazon

March 2022-May 2022

Warehouse/ Materials Handler/Shipping & Receiving Experience. Loads and unloads receive delivery of ordered supplies, materials, and equipment at the loading dock with freight. Packs and crates materials for shipment; Performs custodial duties in keeping storage facilities clean. Operate forklift and related material handling equipment complete receiving reports and forwards purchase orders. Stores stock material in the appropriate storage location

Package Handler

FedEx Express

- Everett, WA

February 2022

to March 2022

Warehouse/ Materials Handler/Shipping & Receiving Experience. Loads and unloads receive delivery of ordered supplies, materials, and equipment at the loading dock with freight. Packs and crates materials for shipment; Performs custodial duties in keeping storage facilities clean. Operate forklift and related material handling equipment complete receiving reports and forwards purchase orders. Stores stock material in the appropriate storage location

Warehouse Worker

TERRA Staffing

Group - Everett, WA

June 2021 to March

2022

Warehouse/ Materials Handler/Shipping & Receiving Experience. Loads and unloads receive delivery of ordered supplies, materials, and equipment at the loading dock with freight. Packs and crates materials for shipment; Performs custodial duties in keeping storage facilities clean. Operate forklift and related material handling equipment complete receiving reports and forwards purchase orders. Stores stock material in the appropriate storage location. Participates in monthly and annual physical inventories, packs, and creates materials for shipment. Follow oral and written instructions. Work well with others. Good physical ability to move moderately heavy and/or bulky material fills stores requisition, sorts and evaluates the supplies and materials loads, and unloads ordnance materials from trucks, rail cars, ships, by hand truck or forklift. Write legibly and solve simple arithmetic problems. Prepares shipments for postal or commercial conveyance. Prepares bills, checks items to be shipped against work orders to ascertain that quantities, destination, and routing are correct. Sorts, counts, packages, labels, insures, unpacks; records discrepancies or damages and notifies supervisor and/or purchasing personnel. May trace lost shipments and/or customer claims of lost shipments. Operate shrink-wrap machine

Fluke Electronics

April 13 2021-May 16 2021

Production assembly person:

My job was to Build the units fluke meters (1)

Go to the computer pull up the job that I was assigned to pull the serial numbers for the jobs that I was to be working that day.(2)on the computer I would bring up the drawings for the unit that I was supposed to build and follow the build process (3) Build the unit or fluke meter install the vacuum hose to the unit install the brass part install the fan, The motherboard, The key pad, and then take the unit to the program table and hook up the wires to program the unit and after10-15min unhook the test wires and move the unit to the Burn test rack hook up the power cables and let the unit charge over night come back the next day and unhook the charged units and hook them up for calibration testing after the testing was done unhook the test wires and move the unit to the final test table hook up the wires and began the testing for about 5 min if everything goes well unhook the unit and move it to the pack out table to be scanned with all the instruction manuals to go with that unit place all the Instructural manuals in the box to be shipped out to its customer tape box closed and place the box on the shipping rollers to be picked up by the shipping dept.

Aircraft Technician

Jamco Everett,wa

B3 - Everett, WA

February 2020 to

April 2020

Layup Prep Dept. Aircraft Seat Assembly

Aircraft Mechanic

Rockwell/Collin

s - Everett, WA

February 2017

to June 2018

A.L & C.I Advance Lavatories & Cabinet Installations Vaupell Contractor

The Boeing Company

November 2017 to December 2017

Assembly mech. assembled light Housings for the 737 interiors, Assembled over head air conditioning housings for the 787 and the 737 aircraft interiors, remover the flash or deburred the parts, Glued the part to its matting part, installed screws and packed in boxes for shipping to Boeing.

Unemployment Insurance

March 2017 to September 2017

Plane tech Aircraft contractor 9/13/17-11/9/17 Mod work on the 777-200 Interiors Galley repair and installations, closet repair, lav, installations, carpet installations, galley mat replacements, seat R& R, P.S.U installations. Aircraft

Mechanic/Interior

s

The Boeing

Company - Everett,

WA

November 2009 to

February 2017

Interiors Mechanic: Install, fit Align, Adjust and perform the pre-installation assembly work to accomplish the installation of plumbing parts and systems. Installing and adjustment of carpets, Stow bins, Sidewalls, Raceways, Mop sills, Curtains, Galley mats, Common areas, Truss, ecs grills, Windows, raceway covers, Indirect lighting, Ecs air Ducks, Seat, lite aiming, Partitions, Seats, CIC, Seal fda, Fillet seal, Installed decals, Installed Lavs, and galley's, hooked up plumming. Did a lot of pick up rework and installed dog boxes.

Aircraft Mechanic

Mcdonnell-douglas -

Long Beach, CA July

2008 to November

2008

Performed mechanic function such as structural assembly, fuel assembly, sealing, tail sechtion assembly, and center fuselage, fixed leading edge assembly, rearspar, frontspar, upper skin aseembly, lower skin assembly wings. On the C-17 aircraft. Electronics Technician

Sedona Staffing -

San Diego, CA

June 2008 to

July 2008

What I did was installed the motherboard into the mainframe tower where we also installed fans and connected wiring plugins.

Unemploy

ment

Insurance

April 2008

to May

2008

Job aire:Feb-2008 April-2008

Aircraft Mechanic

The Boeing Company -

San Antonio, TX August

2007 to January 2008

Here I did aircraft maintenance on the C-17 airlifted removing damaged parts from fuel lines to damaged rivets on the wings, we cleaned the aircraft inside the bilge and inside the wing, tanks replaced fuel lines, crossfeed valves, ejectors, and greased all of the actuators all threw the aircraft, we de-fueled the wings opened the fuel tank doors for venting went in and took out excessive fuel that was trapped in corners of the bays with rages. we cleaned all throughout the cargo bays of the aircraft removing any FOD we saw, dirt, and bugs also.

Unemploy

ment

Insurance

August

2006 to

June 2007

Interior/ Structures, G- 4, G- 5 Aircraft Contractor GulfStream Aerospace

July 2006 to August 2006

Performed interior Structures work installing battery assemblies, bulkhead angles, window shades, seat tracks, antennas, delrons, inserts, tool boxes, floorboards, sealing feed thru, assembled phones, installed door switches, water tanks, fire extinguishers, ray dome rubber seals, panel assembly, nut plates, sure locks removed all entry door locks, installed window in caps, decorative panels installations, installed window shades.

Aircraft Maintenance

Technician P.D.S

Technical Services - Long

Beach, CA June 2006 to

August 2006

Here at Gulfstream, we did aircraft assembly on the G-4, G-5 Aircraft installing toolboxes and delrons and inserts on the galley countertops we installed sidewalls and seats and ceilings and carpets, and I did lots of sealing around the wire feed-throughs, I installed filet panels and door locks.

Aircraft Mechanic

The Boeing Company -

Long Beach, CA June

1998 to October 2005

Here I was hired to work in fuel systems installing inside the wing tank Electrical brackets, hydraulic line brackets, fuel probes, fuel probe brackets, bonding wires fuel jettison fittings, fuel ejectors, booster pumps, fuel strainers, or baskets performed fueling pressure test wing pressure test, sealed bulkheads, encapsulated fasteners, fay sealed clips, edge seal parts inside the wings, I installed the leading edge of the wings left and right wings lots of drilling and countersinking hole according to what was called for off of the blueprints everything was every part we had to drill on the aircraft was located by a station crat and drilled out according to what the drawing said drill them the holes out to. Drilling Close Tolerance holes through multiple layers and materials using straight drills with a high-speed drill motor installing solid rivets, both shooting and bucking, installed screws, Mechanical locking fasteners,jobolts,and hiloks, and tapperloks, deburring holes also. Cogsdill and Weldon bits are used for deburring holes, reamers were used for close tolerance holes and we also used core drills in the drilling process.

Aircraft Maintenance Technician

S.T.S TECHN - Dallas, TX

June 1995 to June 1998

Here I performed aircraft maintenance on the DC-9 cargo aircraft helped removed corroded belly skins

and replaced them with new fresh metal, Drilling out all fasteners that were supposed to be removed and

without scratching the walls of the faster holes if fasteners were drilled out crooked this would cause the

inspector to write up a bad hole that would need to be drilled up to an oversize hole which would cause

the inspector To ok the installation of an oversize fastener had to be approved by an engineer first, after

installing the new skins we would perform outside of that skin with a aerodynamic sealant.

Contract Aircraft Structure Mechanic

Mcdonnell-douglas

June 1996 to September 1997

F/A-18 Program

Performed mechanic duties such as wing framing, build up, precision drilling, and locating wing frame from tooling. In Accordance A.O & Blue Print.

Contract Employee ; Aircraft Sheet Metal Mechanic/Structure Mechanic STS Commercial Aircraft Company C&D Checks

June 1995 to August 1995

June-1995 / Aug-1995 and July1997/July-1998

Contract Employee ; Aircraft Sheet metal Mechanic/Structure Mechanic. Performed mechanic duties. Checked and overhauled aircraft components; repaired and replaced aircraft parts in compliance with authorized FAA repair manuals. Fabricated parts; removed corrosion. Work on commercial aircraft fabed parts. Bend metal across the grain to form parts. check for cracks alondine, prime and installed them. U

n

e

m

p

l

o

y

m

e

n

t

I

n

u

s

u

r

a

n

c

e

F

e

b

r

u

a

r

y

1

9

9

5

t

o

J

u

n

e

1

9

9

5

Structure Mechanic, C-17 Military Division Repair

Mcdonnell-douglas

June 1990 to February 1995

Performed mechanic functions such as structural assembly, reaming holes to close tolerances, drilling, installing, sealing, and torque on the C-17 aircraft. Installed hardware and components according to government specifications. Trimmed fixed leading edge. Performed stress tests on first wing structure for C-17. Ensured compliance to blueprint specifications. Performed hydro test pressure on wing assembly hydro lines ran 5 lbs test for inspection.

Structure Mechanic

McDonnell

Douglas

Corporation -

Long Beach, CA

June 1990 to

February 1995

Perform fuel, structure, and tank mechanic work, inside and outside the wings. front spar wing installations and rear spar installitions, installed fuel systems parts, installed door panels of all sorts, formers that suport them, installed body fairings panels, and wing to body panels andinstalled the needed hardware to the parts.Worked wing tank, center fuselage, and tail sections. Perform assembly operations such as precision drilling, riveting, sealing. Check performance to DPS's and safety requirements. Analyze problems for corrective action; consult with engineering on blueprint revisions. T.C.T.O TRAINED.SEE ME FOR OTHER TRAINING RECORDS AND CERTS.

Major Accomplishment:

Malcolm

Baldridge

Award

Recipient,

2003

Malcolm

Baldridge

Award

Finalist,

2004

Suggest

tool

redesigns.

Created templates for drilling bulkhead fittings reduced repetitive preparation and cycle time, saving significant labor costs. Self - directed work team, working without management overview. Aircraft Painter Prep Mechanic

Teleadyne

Ryan

Aerospace -

San Diego,

CA June

1988 to

1989

Duties were to sand aircraft parts for painters to prime. Mask of areas to be painted. Education

License in mechanical engineering and computer science San Diego City College

Claremont High School - San Diego, CA

Skills

• Expertise with Boeing 707,737,727,747; DC -9, DC-8, DC-10, MD- 11, MD-80, F/A-18, F-15E aircraft and AH-64 Apache Helicopter. ASSEMBLY EXPERIENCE:

Locate work area using drawings which specifies airplane number. Ensure that parts issued are

effective for the airplane and are free of visible defects. If parts are not pre-picked, get parts and

ensure that parts selected are effective for the airplane and are free of visible defects. Set up

assembly tools per tooling instructions or drawing. Review bar chat or automated time line to

determine which job to work on and obtain appropriate drawings for job as required, locate parts/

assemblies into postion or to perform assembly work. Locate tools and/or parts on airplane using

tooling holes, pilot holes. Align parts and secure in place using Clecos or tooling/hand clamps. Check

for good edge margins and alignment. Shim and/or trim parts as required. Select drill bits, reamers

and/or countersinking tools for pilot and full size holes. Locate, drill pilot holes using drill motor and

proper size drill bit(s). Drill, ream, countersink full size holes in parts/assemblies, in proper depths

as required. Disassemble parts and deburr holes using chip chasers, deburring tools, and files to

prepare for installation of fasteners. Use solvents to clean surfaces prior to sealing or assembly.

Apply sealant, alodine, primer, adhesives, special finishes. Make basic layout on parts or assemblies

in order to establish reference points and to check dimensions. STRUCTURE EXPERIENCE:

The layout, assembly, installation, and rework of aircraft parts and assemblies. Duties include fitting, trimming, and assembling detail parts to assemblies with close tolerance

dimensions on various materials. Able to read blueprints. Perform a variety of structural assembly

and riveting operation involving details, sheet metal parts, extrusion, casting, and forgoings in the

fabrication of minor, sub, and major assemblies and componets. Perform layouts, fittings, and rework operation, as required to meet production standards. Perform assembly operation with, or without, the use of production jigs and fixtures. Shear, file tap, ream, and drill to close tolerances. Completes any and all structural rework, squawks, engineering orders and shortages.

REPAIR / MOD EXPERIENCE:

Ability to perform repairs, modifications, and overhauls under limited supervision using policies and

practices and guidance. Understands and interprets required engineering drawings, instructions and

technical manuals related to C-17A aircraft. Resolves and correct routine problems during operation,

maintenance, repair or recovery of delivered products. Ensure adequacy, accuracy and thoroughness

of product assembly, disassembly, repair and functional test methods and procedures during and

following repair. Abilities include modification/repair of landing gear, On Board Inert Gas Generating,

fuel, pneumatic, oxygen, hydraulic, cargo loading and delivery systems, flight controls, protection

practices. Actuators repair, flap and spoiler, thrust reversers rework and slats and also cowlings rework. Engine runs flight checks.

Interiors Mechanic:

Install, fit Align, Adjust and perform the pre-installation assembly work to accomplish the installation

of plumbing parts and systems. Installing and adjustment of carpets, Stowbins, Sidewalls, Raceways,

Mopsills, Curtains, Galley mats, Common areas, Truss, ecs grills, Windows, raceway covers, Indirect

lighting, Ecs air Ducks, Seat, lite aiming, Partitions, Seats, CiC, Seal fda, Fillet seal, Installed decals,

Installed Lavs, and galley's, hooked up plumming. Did alot of pick up rework and installed dog boxes.

(10+ years)

• Aircraft Maintenance

• Manufacturing

• CNC

• Hazmat

Contact this candidate