ACADEMICS:

Bachelor Degree(BA) Mathematics economics From Mazafrabad Board AJK Pakistan

HSE Engineering (Successful Completed 2 years Dip in HSE Engineering) from Modern Institute of informatics management (MIIM) Islamabad Pakistan

DAE (Diploma of associates Engineering civil technology) (Skill development council Pakistan)

S .S.C. (Matriculation in Science) Intermediate College Panjera AJK Pakistan

PROFESSIONAL COURSES & TRAININGS

DIPLOMA IN HSE ENGINEERING: (Successful Completed 2 years Dip in HSE Engineering) Modern Institute of informatics Management Islamabad Pakistan

NEBOSH IGC (International General Certificate UK.)

IOSH Managing Safely safety course from British institute UK.

OSHA 30 Hrs.: Occupational Health Safety Administration training course in construction industry Health Safety Standard (CFR 1926) Issued by US Department of Labor Law Global Safety Institute in UAE

OHSAS 18001-2007: (Successfully completed 5 days course in OHSAS 18001 lead Auditor)

Fire Safety Course from British safety Institute.

OSHO Training Course In Full Body Harness (Certificate No.11318) & C.R.71907 OSHA Training Kingdom of Bahrain

OSHO Training Course in Scaffolding(Certificate No,10504)& C.R.7190 OSHA Training Kingdom of Bahrain

Basic Life support & First aids. Human Assets Training & Poly Clinic Rabigh (Kingdom of Saudi Arabia)

HACCP Auditing course 2013:

Experienced in CATERING & Knowledge of HACCP.

HSE TRAINER

As a HSE trainer conducting the following course on daily and weekly basis.

Basic fire and safety,

Accident prevention Work permit system,

Process hazard & control

Plant inspection Safety audit

First aid and CPR

chemical hazard

Evacuation-drill

Scaffold erection

Fixed fire protection systems Occupational hazard

Firefighting demonstration

Electrical safety

Chemical-hazard

Toolbox meeting

Electricity hazards

Job safety analysis

Job hazard analysis

FIRE FIGHTING

Able to design passive and active fire prevention measures in constructions/ companies.

Inspection for fire, hot fumes, vapor cloud.

Desperation & explosion, fire bell etc.

To test firefighting and emergency systems frequency by conducting fire drills.

Maintenance of fixed and mobile firefighting system in ineffective measures.

Able to organize and participate in firefighting and emergency drill at frequent intervals.

Able to create fire-fighting awareness among the employees.

Also able to job watch activities during any kind of hot work activities in the plant.

RISK ASSESSMENT

The following hazard identification techniques are being carried out with different Risk assessment soft wares. Hazard analysis.

Identifying hazards, (anything that may cause harm).

Decide who may be harmed, and how.

Assess the risks and take action. ...

Make a record of the findings.

Review the risk assessment.

Engineering/ Administrative actions study/review for industries organization.

Noise hazard analysis fire protection system, layout, Risk control mapping.

Detention system layout & spacing

Environment impact assessment studies.

Conduct risk assessment studies for major

Construction industry.

PROFESSIONAL SKILLS

Development of risk assessment procedures.

Development of Food hygiene procedures.

Development of field HSE plan.

Knowledge about international standards.

Performing of HSE Audits

Performing HSE trainings.

Microsoft Office (MS word, power point, excel)

Technical Training Course in Scaffolding Awareness:

Training course was conducted at Riyadh and as received extensive Scaffolding Training /assessment in the following areas:

Material Selection, Inspection & Care of Scaffolding Components (Application) Standard /Dismantling Principles/Safe Working Procedure & Typing Methods Application of BS 5973: 1993 to Scaffold Erection & limitations / Stable Configurations

Inspections Of : Independent Tie & Suspended Scaffolds (Varies Configurations)

Cantilevered Protective Fan Scaffolds, Towers (Mobile & Fixed) & Birdcages

Scaffolding Supervision & Inspection for the above Scaffolds Types, including

Videos Presentations & Practical Demonstrations on the above & Construction of Various Configurations.

.

Mohammad Taj

Father Name: Muhammad Yaqoob

Iqama 241******* Transferable

Date of Birth: 03 March 1981

Religion: Islam

Nationality: Pakistan

Material Status: Married

Driving license: Valid KSA 2026

Language: English, Arabic, Urdu

Cell: 059******* & 009**-*********

Email: adoiys@r.postjobfree.com & adoiys@r.postjobfree.com

Passport No: AH7590512, Passport Expiry: 05-03-2024

OBJECTIVE

Seeking for a challenging job in a progressive organization wherein I can have ample opportunities to employ my knowledge, learn more advance in my career and hence be able to add value, not only in my life but also to the lives of people I work with.

PROFILE

Know-how about Safety & Environmental Management System.

Self-motivated, rational and realistically target oriented person with innovative aptitude.

Bold, confident and level headed with high proficiency in technicality & communication.

Knowledge of international standards ISO 9001, ISO 14001 & OHSAS 18001

PROFESSIONAL EXPERIENCE

1-ITAL CONSULT COMPANY

Client: Ministry of Interior (MOI)

Position: Site Safety & Security Engineer

The Custodian of the Holy Mosques King Abdullah Bin Abdul Aziz (Project KAP5 (MOI) Jan - 2016 to till date )

Key Responsibilities: Constantly and strictly adhered to main Contractor's HSE Site Plan. Liaised and worked collaboratively with senior management, our main contractor and client on all project Health and Safety, Coordinate with other companies’ safety Officer to ensure my company's HSE policies are adhered to strictly.

Conducting audits of the main and sub-contractors as per project contract, Project HSE Plan & international HSE regulations.

Ensure that Tool Box talks, equipment’s checklists, SRO are properly organized and documented by contractor & subcontractor’s safety Officers.

Instruct/enforce the main contractor to Investigate and report any incidents & Near miss. Risk Management, Communication and Personnel Evacuation.

Record and report all observations.

Promote worksite safety by applying knowledge of industrial process, mechanics, chemistry, psychology and industrial health and safety standard.

Conducting research to determine of Hazard and how to improve preventive method.

Supervision, co- ordination and safety management of all works on site.

Ensure all work carried out were fully compliant with latest Health and Safety guidelines and regulations.

Day to day overseeing of entire project workforce and logistics and subcontractor resources and to ensure management of safe site access and egress routes.

Monitoring contractor health & safety team in conducting Tool Box Talks, Safe system of work, and Daily Activity Briefings to all personnel.

Coordinating and working closely with contractors on all method statements submittals, Inductions, Risk Assessments, Temporary Works permits, Lifting & rigging, earth moving equipment’s, Scaffolding Permits, Hot Works Permits, Confined Space Permits and related safety documentation. Implementing and managing the company’s safety monthly monitoring system.

To interface with other managers and subcontractors and share best practice and ensure effective health and safety measures were milestones.

Conducted HSE Audit of Site/Camp and issue site instruction and NCR to contractor for improving the site.

Prepare Technical reports on the basis of submittals from contractor such as method statement, risk assessment site lay out plan etc.

Responsible to provide safety consulting services to clients.

Accountable to recognize, monitor and make recommendations to ensure that workplace safety hazards are corrected through on-site audits, consulting, ergonomic assessments and interventions according to OSHA and other regulatory agencies.

Cooperate on safety policy development and training.

Responsible for the management of the project safety plan to ensure compliance with the Contractor Safety System document and all other applicable policies and regulations.

Responsible for the safety of company employees and contract employees from pre-mobilization work through post project follow-up.

Supports the evaluations of contractors during the bid process and works in close partnership with the project team to ensure safe, qualified contractors are utilized.

Other project specific duties include but are not limited too are:

Assist Project Manager/Project Leads with implementation and compliance with Contractor Safety Program requirements

Conduct project/contractor safety orientations

Participate in advance / daily planning activities

Participate and present safety updates at scheduled project safety meetings

Interface with Civil Construction, Line Crews and contractors

Serve as the point of contact for insurance carrier representative site visits and assist in implementation of recommended corrective actions

As directed, serve as point of contact for any OSHA site inspections or incident investigations

Compile and communicate required reports and project safety status updates

Perform and document formal safety observations of workplace conditions and activities and provide direct feedback and coaching

Participate in incident investigations and follow-up on implementation of corrective actions.

2-El-Seif Engineering Contracting Company

Position: SR. HSE Officer (Project No. P120. )

Harmain High Speed Railway Station Jeddah (Abdullah Economic City.)

Period: 15 Nov 2011 to December 2015. (4Years)Consultant: DARALHANDSA. (Ministry of railway-client)

3-El-Seif Engineering Contracting Company (CLINT Saudi Electricity Co.)

Position: HSE Officer (Project No. P113.)

Crude Oil Pipeline Metering Station Riyadh (PP10) November 2009 to July 2011(2years)(Consultant: SAUDI ARAMCO)

4- EXPERIENCE IN DUBAI

Consolidated Contracting International Company - Joint Venture (DBB, AG CCIC) (DUBAI)

Position: HSE Inspector (CLINT EMAAR) (CONSULTANT: DBB)

Dubai Mall Project (The World Largest Shopping Mall):

Jun 2005 to July 2009(4 Years)

Key Responsibilities:

Implementing the requirements of project Policy & HSE plan.

Ensure risk assessments are available and implemented in all project activities and facilities.

Prepare accident/ incident forms for on-site and off-site accidents related to project employees/ vehicles.

Lead/ Participate in accident/ incident investigation and reporting as necessary and follow-up the corrective actions until completion.

Monitor safe transportation, storage, handling and disposal of chemicals on site as applicable.

Monitor all tools and equipment are inspected tested and color coded as per required frequency stated in project/ IMS HSE procedures and inspections recorded using appropriate forms.

Conduct emergency drills for identified emergencies on project site.

Inspect waste storage area and report deficiencies for corrective actions.

Perform daily site HSE inspections and report findings using appropriate form.

Advice/guide/consult site employees on selection, use, limitations, maintenance and storage of personnel protective equipment and monitor the correct use of PPE.

Closely monitor the compliance with permit to work system as applicable. Report deficiencies to concerned and follow it up till completion.

Ensure and inspect work areas / work platforms for safe access / egress requirements.

Ensure adequate provisions are made and maintained for heat stress management during hot weather e.g. drinking water, rest breaks, first aid measures.

Proper utilization of time in maintaining safe and healthy work environment through routine monitoring.

Monitor hygiene in wash rooms, mess halls (on site)/ camp accommodations through routine inspections and report findings.

Prepare checklists of equipment’s, tower crane, mobile crane, edge protection, electrical, and tools.

Issuing permits for excavation, confined space, work at height, hot works, lifting, etc.

Time to time giving tool box talk to all site employees to the related jobs.

Prepare accident, incident near misses reports and investigating the root cause of the accident, incident and near misses, putting the health and safety control measures in order to place them.

During daily inspection carry out risk assessment, hazard identifying, putting health and safety control measures and rectified them.

To remove all hazards before during and after operational activities.

Prepare daily weekly and monthly HSE reports and submit to HSE Manger.

Conducted Safety induction for workforce

Conducted "tool box" meeting and/or briefing from time to time to remind workers of the importance of safety possible accident that may occur on a particular work activity

Identifies and ensures HSE resources availability on Projects as per Company safety policy.

Identify safety hazards and taking corrective actions

Monitor subcontractor HSE program / plan and monitor / audit / analyzes the on their projects.

Make proper system for investigation, reporting & estimation the cost of injury, property damage & fire loss.

Performs other duties as required.

Ensures a Project emergency response plan and emergency Management plan is in place.

Monitor permit to work procedures

Preparing of Daily, Weekly, Monthly Safety reports

Assist in emergency duties as required

Checking heavy lift procedure. Job Safety Analysis

Coordinate and monitor all project HSE activities to ensure agreed, Health, HSE and Environmental standards are fully implemented and properly followed

Represent in all matters pertaining to safety and security, health and environmental issues before client and perform all related coordination activities

Investigation of Accident and Incident as per HSE Standard.

Perform hazard Identification, risk assessment and their control measures

Perform accident investigation and analyze the root cause to put effective corrective and preventive measures.

I ensure that all the information given above is true and correct to the best of my knowledge. I kindly request you to consider my resume and give me an opportunity.

Waiting for your favorable reply Thanking you Yours faithfully Mohammad TAJ Date: 01/03/2021 Place: KSA

Contact this candidate