Sign in

Instrumentation & Controls, maintenance & start up

Stafford, TX
April 23, 2020

Contact this candidate



*** ***** **** ********, ***** ***** 325-***-****


** ********* ***** ** * team leader. Secure a challenging assignment in a dynamic organization that would help me cultivate and nurture my skills to the fullest with an opportunity to utilize my Technical and Management abilities to the optimum,while bringing about personal and professional development. EDUCATION

Lee College - Baytown, TX Instrumentation - Certification Related Coursework: Instrumentation & Safety, Industrial Automatic Control, Digital Fundamentals, Technical Math & Algebra, Calibration, Automatic Control HANDS-ON EXPERIENCE

18 years of proficient knowledge and understanding of Technical Drawings and Schematics, Read and understand P&ID’s and Process Flow Diagrams, Perform custom calibrations on various types of equipment Smart and Pneumatic, Work with control valves-manual and controllers, pumps and heat exchangers, I have ow Variables-Rate, Pressure, Flow, and Temperature, perform troubleshooting, operate in a team environment adhering to all safety guidelines and thriving to great work practices amd ethics WORK HISTORY

Burrow Global-Holly Frontier El Dorado, Kansas 2019 Turnaround August-November2019

● Fuel Gas Recovery Unit(FGRU) SIS Checkout

● Shutdown System Triconex Trident v.3.1Fault Tolerance PLC

● PMD Programmable Message Display for compressors made by UTICOR

● All field Instrumentation and valve calibration.

● Valve breakdown & Rebuild

● Documentation of all spec sheets data sheets calibration sheets and punch item list

● Flare Temp and instrumentation check-out

● QAQC & Start-up commissioning

● Work directly with DCS Engineers amd 3rd party on all SIS Check-out

● Walk out packages with clients PSSR before start-up

● Honeywell TDC & Foundation Fieldbus

Wood Group INEOS COGEN PROJECT Alvin, Texas February-April 2019

● LM 3000 Turbines commissioning of all Instrumentation and Controls

● Documentation and control

● Inspect and coordinate contractors

● SIS check-out

● Completed all documents as QAQC

TDS(Technical Diagnostics Services)Commissioning and maintenance Gregory, Texas. Cheniere LNG Project Oct.15-2018-Feb. 2-2019

Lead I&C Commissioning Specialist for all GE Turbines/Compressors & pipeline

● Work directly with GE Engineering troubleshooting and commissioning their state of the art equipment turbines and compressors throughout the facility. Functionality testing for all Bentley Nevada vibration systems & temperature controllers.

● familiar with all Mesonelian valves(parameter changes of valves, stroking and testing of all GE product and equipment) and all Yokagawa software DCS equipment.

● Troubleshoot and function testing SIS Fire Systems associated with turbine. Worked with team Human-Machine Interface (HMI) programming (WonderWare InTouch or similar software compartments and compressor decks for all GE Marqe VI

● QAQC of all construction done by Bechtel Contractor

● use of all state of the art test equipment used for all OSHA requirements and class and division of hazardous areas

CoatesI&E- Commissioning Instrumentation Electrical Technician(Holly Frontier Crude Refinery & pipeline substations(Salt Lake City,Utah)May 5-2018 September 16-2018USA Over see all I&E Contractors for clients facility. Review/signed all permits, work orders & JSA. Attended pre-job plan meetings with all contractors & 3rd Party personnel. Planned all work for contractors look ahead. Assessed all job with contractors before project start date. Document all instrumentation data & loop folder. Final sign off before turning over to customer. Approved/Denied all RFI & Change orders from contractors. Startup procedure verification from all contractors. Approved all loop folders being processed. Worked with team of engineers for precommissioning planning & coordinating of all facilities instrumentation and electrical. Performed all commissioning on instrumentation(Yokagawa-Rosemount-Foxboro-Honeywell DCS/instrumentation throughout facilities once contractors were complete with construction and approval of turnover. Part of an Engineering team in troubleshooting and programming at an entry-level PLC or DCS programming

(Rockwell Software Studio5000 or similar software) Richard automation RAI(QAQC I/E Inspector- I/E Cordinator-November2-2017 May 2 2017 USA Pre-Commissioning/Start-up/Function testing of all equipment. Approved all loops and contractors work completed. Worked with team and planned all turnaround work and commissioning function tests of facility equipment. Verify all specifications are to customer satisfactory. Performed Loop tests from devices to DCS(Emerson Rosemount-Yokagawa-Foxboro-Honeywell DCS/Instrumentation Analog Foundation Fieldbus)Troubleshoot devices as needed. Performed Function Test on vendor Review vendor packages. Verify specifications are to customer satisfactory Troubleshoot. I&E Perform function test on all equipment and devices. Makeup loop folders for final check. Tracked data from completed tests, and developed solutions to any issues. Responsible for the proper evaluation of all drawings and documents, including vendor documents to complete all required tasks and provide corrections as necessary to ensure all documents are updated for completeness, detail and accuracy. Worked with team on Human-Machine Interface (HMI) programming (WonderWare InTouch or similar software Alpha Services- I/E Inspector July 2017- October 2017 West Texas-Anadarko Pipeline Make sure contractor knows and understand all details in dwgs. Make sure contractors understands all work to be done by NEC and Anadarko procedures. Make sure all vendor supplied equipment is up to NEC/Anadarko procedure. Witness all megging, grounding to motors cable tray,etc. Document all contractors work and do daily reports and give updates to Anadarko. Responsible for all call outs to survey and material call outs for projects. Oversee all I&E contractors on all well sites. Issued permits to mech/electrical safe work/hot permits. Approved RFI, RFM on all work done and material needed. Attended meetings for updates on projects, all concerns and safety conditions. Lead electrical discipline work scopes and engineering queries. Ensured that relevant Engineering Technical Practices (ETPs), codes, standards, design guidelines and regulations relevant to electrical systems are correctly interpreted and applied. Start-up/Commissioning equipment and process Review vendor packages Verify

Specifications are to customer satisfactory Troubleshoot & Perform function test on all equipment and devices thoroughly inspected and repaired Served as mentor to junior team members Surpassed revenue goals under pressure and short timed turnaround projects MMR Procom-Commissioning Technician Aug 2016-April 2017/ Emerson SEI April 2017-June 2017

Performed Pre-Commissioning/Start-up/Function testing of all equipment on pipeline & in all facilities. Verify Audited field work by subcontractors, performance of specific inspections and tests, and audit report preparation. Proactively reviewed contractor plans to insure the materials and procedures will pass quality testing all specifications are to customer satisfactory Performed Loop tests from devices to DCS(Analog Foundation Fieldbus)Troubleshoot devices as needed, Performed Function Test on vendor packages with vendor on sight.Team player on DCS systems such as Operator Display implementation, I/O database implementation and control strategy implementation Multiple Contractors 2001-2016 Helper-Instrument


Overseeing all Instrumentation work throughout pipeline project Document all progress and coordinate with customer (Phillips 66)pipeline projects from Beaumont, Tx to Lake Charles, LA. Function Test all vendor packages with vendor(Troubleshoot all technical problems throughout start up)Maintained safety by verifying compliance and assuring proper factory testing Ran operational tests on systems and equipment to reinforce proper processes and remedy malfunctions Applied engineering principles to develop and operate electrical, mechanical and instrumentation processing systems.


● Proficient Computer Knowledge-Microsoft Office-Word, PowerPoint, Outlook, Internet Explorer

● Demonstrated Communication Skills-Verbal and Written

● Outstanding Troubleshooting Skills-Analytical Abilities-Complex Problem Solving

● Safety and Detail Oriented


● ISA Membership (Since 2010)

● Troubleshooting commissioning

● Client-focused

● Fabrication professional

● Creative Problem Solving Certified Forklift Operator

● Leadership/Planning Initiative to work independently/Coordinating Strategic thinker Foundation

● Fieldbus Quality inspection

● Yokagawa DCS training and Development

● PLC(AB-Siemens-Honeywell)DeltaV

● Analyzers (Rosemount-ABB-Bailey-Yokagawa) Bentley Nevada Vibration systems

● GE Compressors and Turbines functionality and commissioning testing. ADDITIONAL SKILLS

Commissioning of all Instrumentation, Troubleshooting, perform hook-up and selection Industrial experience includes: petro-chemical plants, power plants, refineries, gas/oil and methanol plants Over 13 (thirteen) years actively engaged in quality assurance/control, commissioning of Instrumentation & Automation; assembly and testing Compile written procedures reviewing procedures, pre-commissioning start up function test on vendor skid mounted packages Maintenance refinery and power plant-Motors & Instrumentation Piping Skids for offshore structures-to include: jacket & deck construction, cat crackers, boilers, steam turbines, heat exchangers, petroleum and natural gas measurement devices, flare stacks & tips, fired heaters, filters/strainers, etc. Extensive equipment experience with: valves & pumps and instrumentation such as transmitters, densitometers, viscometers, sampling systems and mixing devices Ancillary experience with Industrial construction with additional equipment includes: Welding of carbon steel & alloys; Wiring

(including cabling with tray and/or conduit (composition, steel & aluminum),termination of wiring at panels

& DCS/PLC's Testing Non-Destructive & Destructive Environmental experience includes: petro-chemical plants, refineries, gas and methanol plants. Startup and commissioning projects new and add on facilities.

Contact this candidate