Resume

Sign in

Qa/Qc Civil Engineer

Location:
Doha, Doha, Qatar
Posted:
June 21, 2019

Contact this candidate

Resume:

Curriculum Vitae Dennis C Malicdem – Civil Engineer

* ****

DENNIS CANUEL MALICDEM

Email Address: ac9nq2@r.postjobfree.com

Local Phone number: +974-********

Address: Musheireb, Doha, Qatar

Visa Type: Work Visa (Transferable) with NOC

Desired Position: QA/QC Engineer/Civil/Structural/Architectural Career Objectives:

Looking for a responsible and challenging position to employ my education, experience and efficiency with progressive and well-established organization, which will offer challenging opportunities to increase both my knowledge as well as abilities to achieve a permanent and promising career that will allow me to excel and support continuous success of the company.

Key Qualification:

Register Bachelor of Science in Civil Engineering having almost 18 years diversified and extensive work experience in various aspects of Civil Engineering projects such as Residential, Commercial, High Rise Building, Hospital, Infrastructures, Super Highway, Tunnel, Bridges, Power Transmission System Substation and Oil & Gas Field Development. Expertise in utilizing National and ISO 9001 standards covering all aspects of Quality Assurance and Quality Control System. My broad based experienced in Quality Management System and Construction gives me the proven ability to successfully complete multi discipline projects where I could share and exhibit my potentials and grow based on my performance, accomplishments and achievements. Employment History:

July 21, 2018 to Present

QA/QC Engineer/Civil/Structural/Architectural

AL BADER CONSTRCUTION & STEEL WORKS W.L.L (BCSW) Doha Qatar PROJECT: AL KHOR WORKERS RECREATION EXPANSION PROJECT under BARWA Real Estate Co. The project is located in AL Khor Industrial Area as an expansion to AL Khor workers Sports Complex. Upon completion, it will offer a shopping center and integrated services for employees, including 512 one bedroom and two bedroom apartments, a hypermarket with total area of 7509 square meters and a 300 square meters multi-purpose hall so as to create good living environment where all the necessary amenities and services will be available. Having a contract amount of QRS 105 Millions .The construction work is expected to start in the first quarter of 2018 and will be completed in the third quarter of 2019.

Duties and Responsibilities:

Implementation of the Project Quality Assurance Program for the project

Prepare contractors project quality plan (PQP) incorporating quality control inspection and testing, inspection test plan, method statements according to contract

Prepare method statement for the construction activity including risk assessment and job safety environmental analysis and Inspection Test Plan and Checklist based on specifications of the project & relevant quality standards QCS 2014

Review Material submitted by Subcontractor or Supplier as per Project Specification prior to submission to Consultant.

Prepare comparison and compliance statement for the material as per project specification and relevant standards for consultant’s approval

Preparing the document of project work (Site Inspection Request (SIR) & Material Inspection Request (MIR) Civil & Architectural controlling all inspection activities on the site

Cary out inspection Civil & Architectural and checking for all quality related procedures in the site and ensures activity at the site is as per approved method statement and inspection test plan. Curriculum Vitae Dennis C Malicdem – Civil Engineer 2 Page

Check and arrange Material Receiving Inspection for Consultant approval. Also, check and arrange required third party material testing witness by the Consultant.

Responsible for the quality and workmanship of every activity, all phases of engineering construction relating to Civil, Structural and Architectural.

Issued NCR or Discrepancy report in the event of the non-conforming work done by contractor, reviewed and recommend approval of corrective action, and monitor site implementation.

Responsible for closure of Non-conformance (NCR) and Site Observation Report (SOR) given by Consultant.

Report to the Project Manager, control, and monitor all activities related to Quality Management System, QMS.

August 01, 2015 to June 14, 2018

QA/QC Engineer/Civil/Structural/Architectural

GENERIC ENGINEERING TECHNOLOGIES (GET) Doha Qatar

RECENT PROJECT ACCOMPLISHED: AL BIDDA PARK under Project Engineering Office (PEO) The scope of work consists of design, construction, completion and maintenance. Having a contract amount of QR 963 million. This project is covered 1,000,000 square meters and consists of major landscaping works, infrastructures, roads and pathways as well as several leisure and administration buildings like cafeterias, restaurants, gift shops and command centers. It also includes car park along the area and an underpass construction at Rumailah Street.

Duties and Responsibilities:

Determine and develop construction method statement for the activity based on specifications of the project, relevant quality standards and QCS 2014.

Collaborate with the construction team to ensure that actual construction implementation is in compliance with the approved design provided at site, material used are approved and meet the quality standards; and approved construction method statement provided by the Consultant.

Responsible in the quality and workmanship of every activities, thorough knowledge of all phases of engineering construction relating to Civil, Structural and Architectural discipline interfacing the multidisciplinary operations.

Achieve the quality of construction required in the drawings and specifications for all works under the contract performed ON or OFF site.

Carry out inspection and checking for all quality related procedures in the site.

Supervision and Inspection of Civil and Structural works includes; site installation, reinforcing steel & structural concrete, waterproofing and backfill, footings, column, girder, beams, walls slab and roof deck.

Supervision and Inspection Architectural works include (masonry, tile & granite, painting, finishes- walls, false ceiling, dry walls, doors, windows and stone paving) based on Inspection and Test Plan, Checklist, Method Statement and Works Procedures.

Monitoring the quality of work against the contract specification and drawings.

Recording defects and ensuring rectification is carried out in accordance with agreed procedures.

Keep and maintain all QA/QC documents of the entire project including certificates, calibration, test results, inspection requests, non-compliance reports and site instruction/observations, permanent materials delivered and other QA/QC documents.

Responsible for closure of Non-conformance (NCR) and Site Instruction (SI).

Obtain and collaborate for the construction materials and send to approved third party laboratory for testing as per Project Specification Requirements, Qatar Construction Standards (QCS), ASTM, BS and other relevant standards.

Review Material submitted by Subcontractor or Supplier as per Project Specification prior to submission to Consultant.

Prepare comparison and compliance statement for the material as per project specification and relevant standards for consultant’s approval.

Coordinate with subcontractor/supplier for the quotation inquiry as per approved design drawing, technical specifications and variations of design.

Curriculum Vitae Dennis C Malicdem – Civil Engineer 3 Page

Review Subcontractor or Supplier Company Profile / Prequalification as per Project Specification prior to submission to Consultant.

Key Achievements:

Key personnel, start project from mobilization until Completion, snagging and handover with ahead of schedules.

QA/QC Engineer/Civil/Structural

GENERIC ENGINEERING TECHNOLOGIES Doha Qatar

GET/ZANABEL/ATTIKAT JV Main Contractor: TEKFEN

PROJECT: DESIGN AND BUILD OF AL KHOR EXPRESS WAY under Public Works Authority ASHGHAL The project's scope of work consists of a new expressway located at Al Khor, Qatar. The highway will be 34-kilometer long, comes with 12 bridges and crossings, and will link Doha with Lusail, Al Khor, and the new stadiums. It will consist of five lanes in each direction and is to be completed in 30 months. It will also include eight intersections and pedestrian, bicycle and motorcycle lanes.

Duties and Responsibilities:

Develops and maintains quality standards that apply to onsite construction work, ensuring proper implementation.

Reviews and approves inspections, test plans and quality control plans from client/consultant.

Implements quality control procedures and plans for providing more efficient construction work.

Inspection/ Supervision of Infrastructures @ Section 3 / Tunnel 01 Unit 1 to Unit 11,Underpass 01 Unit 1

&Unit2,Underpass 4,Underpass 5,Underpass 06 Underpass 07 and Underpass 08 and @ Section 01/ Underpass 10,Underpass 11,Underpass 12,Underpass 13 & Underpass 14 as per Project Specification.

Inspection/ Supervision of construction activities at site like, Material Inspection, Visual Inspection for Excavation, Plate Load Test prior for Casting of Blinding Concrete, Water Proofing Works of Structures, Checking of Reinforcement, Formworks and Concrete Casting of Structures.

Backfilling and Compaction Test, Laying and Compaction Testing of Subbase, Application of Prime Coat, Paving and Sampling of Base Course, Application of Tack Coat, Paving and Sampling of Wearing Course and Coring Test of Road Work,

Identifies, analyzes and resolves problems and issues with quality assurance and control for site construction.

Responsible for closure of Non-conformance (NCR) and Site Instruction (SI). June 15, 2014 to June 26, 2015

QA/QC Engineer /Civil/Structural

CONTRACO WLL. Doha, Qatar

PROJECT: WORKERS HOSPITAL AND INTEGRATED HEALTH CENTER under HAMAD MEDICAL CORP. Located at Mesaieed, Doha, Qatar. Having a contract amount of QR620 million, with a total lot area of 154,000 Sq. m. The development consist of a main building comprising with 200 Beds, In-patient hospital and out-patient hospital and a Health Centre with Ancillary building, also separated building for Mosque and Central Utility Plant. Duties and Responsibilities:

Monitors the construction contractor’s quality-assurance/quality-control (QA/QC) programs, procedures, and related-quality activities.

Monitors and perform quality control functions at the site.

Ensures that the production processes comply with the requirements of the Customer or Consultant and the Company Integrated Management System (IMS).

Prepares quality plans, inspection and test plans and approved material lists for each project undertaken.

Performs inspections and tests as detailed in PQP, Procedures and Work instructions, and ensures correct reporting.

Monitors and implements the QMS in relation to his function and site operations. Curriculum Vitae Dennis C Malicdem – Civil Engineer 4 Page

Ensure that PQP, MS, QCP & ITP are submitted by all subcontractors and are aligned with CONTRACO PQP.

Participates in the development of quality control reports and procedures as requested by the Construction QA/QC Manager.

Raises NCR’s and PAR’s as necessary to highlight deficiencies.

Follows up on actions needed to close out NCR’s and PAR’s.

Participates in audits with Corporate QHSE Manager as required.

Checks and reviews the plans and specifications for the proper construction and quality implementation at job site, perform pre-inspection to ensure that all installed materials are within the standard in conformance to applicable drawings and specs.

Interprets design plans and specifications to verify the work installed and performed in accordance with the contract documents.

Responsible for all of Qa/Qc Civil related activities

Perform pre-inspection to ensure that all the materials are within the standard.

Performs civil and structural inspections and tests, such as soil compaction, moisture content, aggregation, graduation, concrete slump, air entrainment, concrete compression, lines and grades surveys, reinforcement, formwork and concrete casting.

To ensure that all execution and inspection are carried out as per inspection plan / drawings / codes & specifications.

To carry out inspection & certify all necessary inspections during various stages of site activities as per approved inspection and test plan.

Produces activity reports as necessary to ensure that all QC activities have been fulfilled. QA/QC Engineer /Civil/Structural

CONTRACO WLL. Doha, Qatar

PROJECT: DESIGN AND BUILT OF CONCRETE BRIDGE AND MARINE WORKS under PRIVATE ENGINEERING OFFICE

(PEO) Located at Al Subara, Doha, Qatar.

Duties and Responsibilities:

Implementation of the Quality Management and control programmed for the project

Responsible for all aspects related to project Quality Assurance and Quality Control.

Prepare the checklist, Inspection and Testing Plan/Procedure (ITP) of the project

Coordinate for required materials sampling and testing

Carry out inspection for the following tests shall be conducted on the working piles: a. Preliminary compression pile load test

b. Compression test on 1 nos. working piles up to 1.5 times design load c. Pile integrity testing on 100% of the piles

d. Sonic core logging test for 10% of the total number of working piles e. Axial load test

Perform inspection for the implementation of working piles such as : a. Demarcation of piles location

b. Installation of temporary steel casings

c. Drilling to design depth and cleaning of pile base using cleaning bucket d. Checking of borehole depth

e. Fabrication of rebar cages

f. Lowering of rebar cage and concreting of pile borehole g. Removal of temporary steel casing

Carry out inspection of reinforcement, formworks and casting of concrete of post tensioning beam

To ensure proper execution of the projects in accordance with the plans and specifications, accomplished the same within the limit of the project budget to fulfill a systematic, efficient and timely completion of the projects.

Curriculum Vitae Dennis C Malicdem – Civil Engineer 5 Page

July 17, 2012 to June 28, 2014

QA/QC Engineer/Civil/Structural

QATAR ENGINEERING AND CONSTRUCTION COMPANY WLL. (QCON) Doha, Qatar PROJECT: NEW FURNACES AND ETHYLENE TANK PROJECT under QATAR PETROCHEMICAL COMPANT (QAPCO). Located at Mesaieed, Doha, Qatar. Having a contract amount of QR 121 million, The role & scope of work consist Structural fabrication and erection works, equipment erection, piping fabrication and installation, electrical, instrumentation works, painting and insulation works and pre commissioning works. Assembly of Furnace modules and erection, Furnace piping and Shutdowns for Tie in works. Construction of Ethylene Tank works and associated equipment and facilities. The work also includes Tank fabrication, and erection, piping works associated with structural, and Electrical and Instrumentation works. PROJECT: CARBON DIOEXIDE RECOVERY (CDR) PLANT under QATAR FUEL ADDITIVES COMPANY (QFAC). Located at Mesaieed, Doha, Qatar. Having a contract amount of QR 80 million, The role & scope of work consist Structural fabrication and erection works, equipment erection, piping fabrication and installation, electrical, instrumentation works, painting and insulation works and pre commissioning works. PROJECT: QATAR POWER TRANSMISSION SYSTEM EXPANSION PHASE 5,6,7,8 SUBSTATION under QATAR GENERAL ELECTRICITY AND WATER WATER CORPORATION T (KHARAAMA). Located at Mesaieed, Mic and Shamal North Road. Doha, Qatar. Having a contract amount of QR 273 million, the role & scope of work Engineering, Civil works, Building Services, Fire, Safety, HVAC, Mechanical, Electrical Erection, Testing & Commissioning Works

Duties and Responsibilities:

Implementation of the Project Quality Plan.

Ensuring that the company’s Quality System is applied and effective.

To comply with all Company Project Specifications and applicable international codes and standards.

Preparation of Inspection and Test Plans (ITP’s) and Review and Approval of Vendor/ Sub contractor ITP’s and QA/QC Procedures.

To ensure that approved methods of inspection and test plans, procedures and audit program were all in place and utilized, as they apply throughout all stages of the project.

Preparation of QA/QC, KPI reports.

To ensure that quality requirements are determined and satisfied throughout all segment of contract execution.

To ensure that quality assurance system is efficiently established and conforms to the company’s quality requirements.

To ensure that the proper system for QA/QC records is established and maintained for each project.

To attend and participate in the Quality Audits which shall establish and evaluate the effectiveness and adequacy of the functions, system and procedures of the subcontractors Quality Plans.

Organizing testing and submission of test documentation as specified.

Liaise and assist Engineers and Supervisors in the QA document presentation, verification and reporting of construction tasks to ensure compliance.

To provide for early and prompt detection of deficiencies and for timely and effective corrective action.

Close of Corrective Actions and implement actions of preventive measure.

Managing Third Party Inspections at Vendor Locations.

Monitor material identification and compliance to Material Traceability requirements.

Witnessing of Visual and Dimensional inspection for the structural and piping as per AFC drawings, Applicable codes and standards.

Witnessing punch listing as per project specifications and AFC drawings.

Carrying out the Final inspection walkthrough upon completion phase of the Project. Key Achievements:

Completed and handover the project ahead of schedules Curriculum Vitae Dennis C Malicdem – Civil Engineer 6 Page

May 17, 2011 to July 2, 2012

QA/QC Engineer/Civil/Structural

BHARAIN SPECIALIZED TECHNICAL SERVICES COMPANY WLL (BSTS) Bahrain Manama PROJECT: OIL AND GAS FIELD DEVELOPMENT OF OIL WELL PITS, NEW TANK BATTERIES WELL MANIFOLDS, NEW TESSEPERATORS, NEW SHIPPING PUMPS, NEW WATER FLOODS, NEW SKIDFUEL GAS & RIGHT OF WAY ROAD under TATWEER PETROLEUMN Located at Bahrain.

The scope of work consist Civil works, Structural works fabrication and erection works, mechanical equipment erection, piping fabrication and installation, electrical, instrumentation works, painting and insulation works and pre commissioning works.

Duties and Responsibilities:

Monitoring, Supervision and Inspection of soil excavation and earthworks, reinforcement, formworks, concrete works, block work, structural steel works and roofing, road and paving, tank pads and bunds, and well pit, right of way and other activities related with civil and building works in accordance with the approved drawings and specifications.

Responsible for Quality control inspections at site for all civil works

Supervision and Carry out Inspection of the following: a. Well site preparation as per TP Standard Drawing b. Preparation of Well Site Access Roads

c. Construction of Well Cellars

d. Construction of Oil Sumps

e. Excavation of Road Crossing for Pipelines,Cables and Subsequent Reinstatement f. Excavation of Trenches for Pipelines,Cables and Subsequent Reinstatement g. Construction of Pipe supports and anchors

h. Fabrication and installation of Structural Steel Works for platforms, instrument support and walkway i. Removal and rerouting of security fencing and fabrication of gates around existing installation j. Fabrication and installation of removable fences around oil well pumping area

Performs civil and structural tests, such as soil compaction, moisture content, aggregation, graduation, concrete slump, air entrainment, concrete compression, lines and grades surveys, bolt torques, and concrete coring.

Reporting to Qa/Qc manager on all quality issues.

Familiar with international codes and standards used for civil design, construction and testing of materials and works.

Capable of preparing inspection plan and manage inspection process.

Compiles test inspection and test reports for test pack preparation.

Liaison with client’s inspector on schedule and conduct of site inspection and tests requiring witnessing.

Coordinating with the construction engineers and client inspectors for clearing designated inspections (Hold and Witness Points).

Preparing daily inspection reports on field activities such as: soil testing & compaction prior to concrete pouring for load bearing and non-load bearing foundations.

Surveillance and enforced quality control at site, and ensure that works are performed according to the approved project quality records are complete for each item of works, prior to hand over to the client.

Issued NCR or Discrepancy report in the event of the non-conforming work done by contractor, reviewed and recommend approval of corrective action, and monitor site implementation.

Conduct inspection on all materials received at site and ensure materials to be used confirming to contract plans and specifications.

Curriculum Vitae Dennis C Malicdem – Civil Engineer 7 Page

December 5, 2009 to May 5, 2011

QA/QC Engineer/Civil/Structural/Architectural

ARABTEC CONSTRUCTION LLC Saudi Arabia

PROJECT: ARABTEC-ALSAAD JOINT VENTURE PROJECT

LAMAR TOWERS (CAYAN INVESTMENT JEDDAH KSA)

The project's scope of work consists of mixed-use towers located at Jeddah Corniche, Jeddah, Saudi Arabia. The Lamar Towers are a pair of skyscrapers located at Al Kumaysh Road in the city of Jeddah, Saudi Arabia. Located on Jeddah Corniche, Tower 1 will be 350 meters tall with 72 floors above ground, and Tower 2 will be 301meter tall with 62 floors above ground. The project provides approximately 409770 square meters built-up area divided into 500 high-end residential condominiums, 30000 square meters commercial offices, and a 30,000 square meters 5-star hotel. The project incorporates a podium comprising 3 levels of retail and 10 levels of office space that connect the 2 tower forms at the lower levels. The project also includes a fitness center, spa and guest reception areas for residents use. Actual Value Cost 600 Million USD

PROJECT: ARABTEC-SAUDI BINLADIN GROUP JIONT VENTURE PROJECT PRINCESS NORA UNIVERSITY FOR WOMEM (PNUFW)

(MINISTRY OF FINANCE RIYADH KSA)

The project calls for construction of a new university for women. The university is expected to cover 8 millions square metres and located on King Khalid International Airport Road at north of Riyadh. The total built up area is around 3 millions square metres. The university will include administration buildings, 13 faculties, a 700-bed student hospital, laboratories, research centres, and residential area that include accommodation for students and staff. The capacity of university is around 26,000 students. Actual Value Cost 11.5 Billion USD Duties and Responsibilities:

Preparation of QA/QC Manual in line with ISO Document control requirements

Preparation and submittal of material and shop drawing schedule for approval.

Prepare contractors project quality plan (PQP) incorporating quality control inspection and testing, inspection test plan, method statements according to contract.

To ensure compliance and implementation, and monitor effectiveness of the quality management plan and inspection test plan during project construction

Preparing the document of project work, controlling all inspection activities on the site

Inspecting of all materials delivered at site to ensure they conform with the specified quality requirements

Inspection of works prior to inspection by the Consultant Engineer and obtains their approval.

Ensuring that consultant/client comments are implanted

Assisting consultants during the inspection and coordination with the laboratories in getting the reports and submit to the consultant.

Prepare and submit QA/QC report.

Eliminate Non-Conformity at work and ensure that the requirements of ISO are fully meet at all site activities.

Conduct regular site inspection, issue and follow up nonconformity and corrective action forms.

Formworks inspection as to the proper dimension, placement and bracing.

Reinforcing steel verification especially on the placement, sizing and cleanliness prior to concrete pouring.

Inspection for proper method of concrete curing whether in accordance with specification.

Actual test recording for the correct slump during concrete pouring.

Daily submission of reports/data’s.

Carry out Inspection of Architectural work finishes such as – Blockworks, Painting works, Plastering works, Wooden/HM Doors, Stonework’s, Tilework’s. Aluminum Glass Doors & Windows, Revolving Doors, Gypsum Boards Ceiling & Partitions. Caseworks, Fire stopping, Waterproofing

Strictly implementation of ISO 9001:2000 Quality Standard and all other applicable standards/related procedures

Curriculum Vitae Dennis C Malicdem – Civil Engineer 8 Page

October 20, 2008 to October 21, 2009

QA/QC Engineer/Civil/Structural

PROFILES RHC LLC Al Ain Dubai United Arab Emirates PROJECT: P-125/COMMERCIAL MODULES TIJARA TOWN PROJECT (5 BLOCKS CONSIST OF 50 BUILDING) under DUBAI PROPERTIES. The development will span 188 hectares and will be located in Dubai land on Al Ain Road; close to Emirates Road.Tijara Town will be the first project in Dubai to offer integrated office, showroom, warehouse, and apartments as one unit. It offers 51 customizable freehold mixed-used units of 7,700 square metres each that will help businesses improve efficiency through low operational costs. Actual Value Cost 6 Billion AED Duties and Responsibilities:

Implementation of the Project Quality Assurance Program for the project

Take control for all quality measures and procedures of construction methodology of work in project site

Providing Quality Control site inspection report

Ensuring that inspection requests are implemented.

Ensuring that all test reports are verified to meet the contract requirements.

Ensuring all materials delivered to site are inspected and conform to specified requirements.

Issue and administer NCR & CAR as necessary including follow up.

Inspection of all construction activities at job site if conformed to quality and procedure prior submitting any inspection request to avoid rejection during consultant inspection.

Inspection during casting of concrete i.e. ready mixed concrete slump cone test, temperature test, delivery notes if conformed to specification, sample cubes, concrete application to structure if conformed to quality standard and procedure, and prepares field record of concreting for approval by consultant

Monitor all daily civil activities of project site if conformed to quality standard and procedure prior to any installation of structural and architectural material’s i.e. PCC of footing or any structure (compaction test of sub base / road base, anti-termites, laying of 1000 gauge polythene sheet, casting and water proofing), RCC of any structure (approved bar bending schedule of steel reinforcement, approved checklist of any structure by consultant and approved request for inspection by consultant and authorities TECOM if needed), for architectural material’s (approved shop drawing, approved method of application, approved sample material by client and consultant and approved mock – up if any by consultant and client)

Preparing the monthly and weekly QA/QC report

Strictly implementation of ISO 9001:2000 Quality Standard and all other applicable standards/related procedures

May 12, 2006 to September 15, 2008

QA/QC Civil /Structural Inspector

KETTANEH CONSTRUCTION LLC Doha Qatar

PROJECT: RAS LAFFAN OLEFIN PROJECT ETHYLENE CRACKER PLANT RAS LAFFAN OLEFIN COMPANY LTD (QATAR)

RASGAS ONSHORE EXPANSION PHASE II (TRAIN 6 &7 EPC) RAS LAFFAN LIQUIFIED NATURAL GAS CO. LTD (QATAR)

Duties and Responsibilities:

Monitoring,Construction Supervision and Inspection of all concrete works such as Compressor foundations, Various tanks, equipment’s and vessel foundations, Pipe rack foundations, Pre-cast concrete columns and beams and all related Building concrete works including all Architectural finishing works. Concrete and Materials testing for approval of design mix in conformity to project requirements. Fabrication and Erection of Pre-cast Columns, beams and Steel structures to Pipe Rack area as well as erection of steel structure Pre- Engineered Buildings. Excavation of underground utilities, Fireproofing to Steel structures and manage to coordinates the works between Civil, Buildings, Structural, Piping, Mechanical and Electrical disciplines.

To supervise and monitor construction activities are in accordance with approved project requirements and specifications.

Curriculum Vitae Dennis C Malicdem – Civil Engineer 9 Page

Ensuring that the installations are executed in line with International Standards and Specifications.

Liaise with the EPC Contractor in all matters about construction work at all locations.

Monitor and contribute to the timely implementation of the construction elements of the EPC Contractor scope for the project.

Identify any delays and any issues that may adversely affect the schedule, discuss with the Contactor and report/recommend solutions.

Conduct inspection of activities of construction and testing works at site as required by Inspection Test Plan to verify product conformity and full compliance with engineering drawings, project specifications and project contract documents.

Ensuring that the inspection and tests are carried out in conformity with the field quality control plan and obtaining the relevant documentation.

Taking part in the definition of the corrective actions and ensuring the correct implementation of the resolution of any non-conformity.

Verify and monitor all drawings used by contractor at construction phase are all updated.

Enforce and implement the company Incident Injury Free policy.

Adopting, monitoring, implementation safety and environmental



Contact this candidate