Shivtej Chandrakant Jadhav.

(BE Mechanical).

Address for communication:

Vandana Apartment, Flat no.06,

Near Nashik Merchant Co-op. Bank,

& near Deolali Vyapari Co-op. Bank, E-Mail: ac6unk@r.postjobfree.com Indiranagar, Nashik-422009. Contact no.: +91-997******* Profile

Unigraphics NX 10.0 Certification with GD & T

Sound knowledge of ‘ASME Y14.5M-1994 (R 2004)’

Bachelor Degree in Mechanical Engineering from University of Pune. Technically accomplished professional with over 3 years of rich cross functional experience in UG NX implementation, Mechanical Designs Executions along with productions drawings and production processes preparations.

Professional Synopsis

Since Sept’2015 with EMI TRANSMISSION LTD.,

Plot no. 157/2/1, Village Bramhanwade (Shinde), Tal. Sinnar, Dist. Nashik-422103. Ph no. 025*-*******/219/250. Website: www.emi.co.in A competent professional with 3 years of rich experience as a Design Engineer in Engineering - R & D section from Sept, 2015 and till continue. Responsibility:

Technically Scrutinize the data given by customer and Prepare Drawings as per requirements.

Responsible to make engineering calculations for newly designed component and to prepare Optimize Drawings as per weight, machining and cost criteria.

Prepare Technical Scrutiny and GTP as per projects specification.

Prepare Tender Stage drawings and submit it to tender dept. within deadline.

Co-ordinate with Tendering or Marketing divisions for any technical query / data insufficiency.

Prepare Engineering stage Drawings and take its approval from customers in accordance with marketing dept.

Resolve technical queries made by customers.

Standardization of components.

Design and prepare Forging & Casting drawings on 3-D software (Unigraphics NX) for new component.

Selection of material as per loading conditions and environmental conditions

(temperature application) as well as quantity of component.

Technically validate the design criteria of new component by testing in QC lab.

Preparing Detailed Technical Reports for developed component for management and maintain its record.

Preparing ERP-BOM & E-BOM as per works order, co-ordinate with marketing dept. about BOQ & quantity variations, any amendment reported to purchase department.

Prepare Production Drawings and standard production processes.

Follow-up all tender stage, engineering stage starting from design till completion of projects.

ISO Documentation.

Technical Skills

Design Software

[CERTIFIED]

1. AutoCAD

2. Unigraphics NX 10.0*

- FORGING AND CASTING DOMAIN

- Well known of Product Lifecycle Management (PLM), Synchronous Modeling & Non-Parametric Modeling

- GD & T

3. Use of Ansys software for Academic Project

BOM Software ERP BOM, E-BOM

Industrial Course

[CERTIFIED]

Basic CNC Turning Course from ITI, Nashik

Development Activities, Achievements and Roles

Always focus towards Zero Rework and Zero Revisions on delivered solutions.

Development of High Tensile component to withstand -25 C Temperature for the value 27 joules by Impact test, using only surface treatment conditions for cost reduction criteria.

Development of Retaining rod type Hexagonal Spacer Damper to take load of 15kN in compression and 5kN in tension for weight reduction criteria. Also developed die for preformed helical armour rods and its fixture for testing.

Development of Optical Ground Wire Accessories. (OPGW – Transmitting fiber optics from overhead transmission line).

* Certificate verification from : https://www.caddcentre.com/caddVerification.php Student ID : M140388005

Developed Gauges for in-process inspections to maintain the quality and accuracy of products.

Prepare Internal Audit report for Integrated Management System (9001 and 14001)

Reverse Engineering the old products, components which documentations does not known.

Prepare technical reports.

Assist Type test and Factory Acceptance Test (FAT).

Make assemblies of strings in Unigraphics 3-D software and check its clearance and fouling with other parts. Correct and upgrade the fouling parts to delivered On Time Solution for better process flow.

Knows the Quality Control Operations and casting & forging Operations, as well as Heat treatment operations.

Assist assembly / fabrication Depts. to resolve any query during execution.

Find Appropriate Solutions to achieve agreed deadlines. Projects and seminars

1] Project on Mechanical Behaviour and Analysis of LM-30 Aluminium matrix composite reinforced with TiB2 for Piston at Elevated Temperature* i. Sample prepared by using Aluminium LM-30 alloy as a base material along with addition of 5,10,15% of its weight TiB2. (Titanium Di-Boride) Reinforcement. ii. Tension test performed on Composite mixture at elevated temperature as Room temp, 50 C, 100 C, 150 C and 200 C and plot the results (S-N Curve). iii. Chemical analysis and microstructure evaluation is performed on test samples. iv. The main objective is to reduce the weight of piston and to increase its capacity to perform significantly at high temperatures. And also to increase its fatigue strength and corrosion resistance.

v. Validate results in Ansys software.

2] Project on Non-Conventional Hydropower Centripetal Pump: i. By using the centripetal law of motion, the water from canal or river can be distributed over a long distance & at a certain height by increasing its velocity

(V), discharge (Q) without using any electrical supply. ii. Pumping can be possible in undershot conditions and conduit losses can be minimized. iii. Here the motive force is centripetal law of motion that means water is goes towards center and as c/s area reduces the velocity as well as pressure increases. Academic Details

Sr. No. STATUS BOARD / GRADE

1 BE MECHANICAL UNIVERSITY OF PUNE (2015) with FIRST CLASS 2

ME MECHANICAL

DESIGN ENGG.

UNIVERSITY OF PUNE (2018) with FIRST CLASS

* Paper present in Post Graduate Students Conference in Mechanical Engineering

“Mechpgcon-2017”

* Paper published in International Journal of Advance Research and Innovative Ideas in Education. “Volume – 3 Issue – 5 2017 “

Issn(O): 2395-4396 Paper Id: 6841

* Paper published in National Conference, “Advance Design and Optimization Techniques in Engineering Applications” on January 18-19, 2018 ISBN Personal No. Details ***-**-****-276-6

Name : Shivtej Chandrakant Jadhav

Date Of Birth : 10th February 1992

Gender : Male

Phone Number : +91-997*******

Marital Status : Single

Nationality : Indian

Languages : English, Hindi, Marathi

Hobbies :

Playing Cricket, watching Automotive channels on

TV, Web surfing.

I consider myself familiar with Mechanical Engineering Aspects. I am also confident of my ability to work in a team. If you give an opportunity to work in your reputed company, I will assure you that I will strain myself to enhance the image of your company further.

I hereby declare that the information furnished above is true to the best of my knowledge and belief.

Date: Yours sincerely,

Place: Nashik (S.C.Jadhav)

Contact this candidate