Resume

Sign in

Project Management

Location:
Kolkata, West Bengal, India
Salary:
Yes
Posted:
June 12, 2018

Contact this candidate

Resume:

CURICULUMN VITAE,

Name = Kanai Debnath, Position = W elding Inspector

Date of birth- 1st June 1971. Nationality- Indian. Language- English, Hindi, Bangla. Permanente Address= Village- East Kamarthuba. PO- Habra, Pin-743263, DIST- 24 Pgs. (North), Email ID: ac5uj7@r.postjobfree.com or ac5uj7@r.postjobfree.com, Skype: kanai11112, home Phone- 009***********, 0091 876-***-**** Passport no- Z4316534, Re- Issue date- 24/07/2017, Expiry Date- 23/07/2027 S ummary

I am writing to apply for the position of Welding Inspector. I have 16 + years of experience welding on a construction site where I became interested in becoming an inspector. To pursue this goal, I earned an associate degree in welding technology and became CSWIP certified. I know how to read blueprints accurately and I studied the structures and properties of metals. My experience includes setting up and using welding machines and I know a variety of welding techniques. I also studied arc welding and the production of metals and I became familiar with Microsoft Excel, Word, PowerPoint and other computer programs used in this profession. I have the ability to inspect the structures visually to look for defects that could pose a problem such as pits or cracks. I also have the training to perform stress tests to make sure the welded joints will hold up under pressure.

I have excellent communication skills with the ability to relay the results of the inspection to the supervisors in charge in a clear, easy to understand fashion. I also have the ability to keep excellent records of all tests run and inspections conducted.

I pay close attention to details and I have the knowledge and experience to ensure that all work meets the specifications, quality and safety standards set forth by the company and the local, state and federal regulations. I have the physical strength and stamina to perform the duties associated with this position and I am confident that I am the best person for this job.

Project– TATA PROJECTS LIMITED.

Duration 7t h

may 2018 to till date (fully s hutdown job)

Clint- Haldia Petrochemicals Ltd, plant shutdown. H PL. West Bengal (India) Joint QA/QC Department - QA/QC ENGINEER/SHUTDOWN INSPECTOR Analyze project quality requirement and preparation of required documents for inspection of static and Rotary Equipment Viz. Column & Tower tray internals, Exchangers, Fin fan coolers, Reactors, pressure vessels, filters, Skid Mounted packages, compressor, Blowers; Monitor all inspection activities regarding equipments installations, Starting from the warehouse inspection, each stage of erection and Up to final documents hand-over. Prepare issue and Follow-up corrections to deficiency reports for material or installations that do not Meet specification requirements. Final sign-off on all QC check lists and ITP completion forms after final acceptance by QC department.

Perform punch listing of mechanical installations and monitor punch list work items. Co-ordination with client and company inspection teams to solve QC related issues. To ensure all welding activities related with equipments are done by proper welding procedures.

Project – CFP projects, (joint venter SK Engineering (SK E&C), GS Engineering (GS E&C), Duration November 16t h

2017 to 7t h

march 2018 (fully s hutdown job)

Clint –KNPC (Kuwait National Petroleum Company, Company- SK Engineering & Construction Co Joint QA/QC Department as a - Welding & NDT Inspector DUTIES AND RESPONSIBILITIES:

Approval of welders of the Subcontractor’s after reviews the documents & Issue the job cards.

Review of Quality Control procedures / Method Statement of various disciplines and comment / recommend for development, if required, to comply the requirements of Codes and or specification.

Ensure that all Quality Control activities on shop / site are fully implemented and maintained throughout

All Stages of contract execution in accordance with Project Specifications and Code requirements,

Approval of the NDT third party contractor subjected of the company Written Practice, NDT procedures,

Radiation source handling / storage procedure, personnel radiation exposure monitoring, emergency

Procedures etc. to the compliance of the Local Regulations, Project Specifications, Codes and Standards,

Review Welding Procedure Specifications (WPS), Procedure Qualification Records (PQR).

Constant monitoring and control of shop & field welding activities for piping, welding, Structural

(AWS D1.1) and Piping (ASME 31.3) e.g. material verification, pre-weld inspection, pre-heating, application of approved welding procedure,

Extent of welder’s qualification, proper storage/handling of welding consumables, in-process welding surveillance, welder’s performance, rejection rate, PWHT, Hardness testing, PMI and control of NDT to the appropriate line class requirements.

Control non-conforming work activities through the implementation of the non-conformance control procedure. If occurs, initiating logbook entries in KNPC QMIS (Quality Management Information System) as violation, proactive notification, General comments. It is helping to initiate NCR by Supervisor and preparing discrepancy reports, site inspection reports, and site instruction reports on structural, pipe work fabrication and installation.

Monitor sub-contractor to ensure resolution of NCR / CAR’s in a timely manner.

Responsible for the close-out of the field discrepancy& non-conformance reports (NCR).

Resolutions & Technical advices to the technical queries (TQ) by the sub-contractors.

Coordinates and schedules the quality inspection and testing with Construction Team through NFI.

Determine the need for inspection tools & equipment, establishes proper calibration parameters for these items.

Provide technical guidance to inspection & testing personnel regarding quality matters.

Perform inspection, examination and test as required by quality procedures.

RT Film Interpretation.

Review and Approval of subcontractor’s Piping Test Package.

Witness / Accept piping leak testing (hydro / pneumatic), Stress Relieving (PWHT), Hardness Testing, Positive Material Identification (PMI), MPI, PT etc. through NFI.

Perform system walk-down to generate the initial punch-list or “work to complete” list identifying as much as possible all incomplete works prior to Strength Tests and Monitor the list through MPCS (Mechanical Performance and Closeout System).

Review of the final documentation, Quality Dossier, for the piping system, etc.

Obey good SAFETY practices and remind the team periodically about the importance of safety at all times during working at height, confined space and when pressure testing.

Duration -September 25th

2015 to 26th

January 2017, C Joint - AZERBAIJAN - SHAH DENIZ STAGE 2 (SD2) PROJECT Clint –BP EXPLORATION (SHAH DENIZ) LTD, Company- TEKFEN CONSTRUCTION AZERBAIJAN QA/QC Department as a - Welding & NDT Inspector

D UTIES AND RESPONSIBILITIES:

Perform and strictly monitor the following inspection activities as per ITP, CEP and Project Specifications.

Witness WPS & WQT as per required codes and standards.

Review and verification of Material certificates and Cutting Plans before Fabrication.

Identification of material and stamp transfer.

Preparation of As- built Drawings, weld maps for shop and field Welds.

Monitoring Weld joint preparation.

Fit-up inspection, welding inspection and visual inspection.

Welding Inspection of Tie-In & Repair Weld.

Verification of pipe fittings and Piping Dimensions.

Verification and approval of heat treatment procedures.

Monitoring of Pre Heat treatment before Welding.

During welding, check proper parameters as per WPS.

Control welding consumables and weld defect rate as per procedure.

Welder Performance monitoring and taking corrective action.

Monitor PWHT in special requirements.

Verification of PWHT reports with respect to procedures and specifications. Hardness inspection

Arrange and co-ordinate NDT activities.

Evaluation of NDT results (PT, MT, RT& UT).

Interpretation of radiographs films.

Assure all piping fabrication and handling of fabricated spools and installation are in accordance with general arrangements and isometric drawings / project specification.

Preparation & review piping hydro test packs according to P&ID and Isometric and organizing hydro test.

Arrangement and witnessing of Hydro, Leak and pneumatic tests according to client specification and approved drawing.

Monitoring - Cleaning & Gauging and Air Drying of Pipelines.

Punch list preparation during line walk for piping spool, piping valves, control valves, pressure valves, and its rotation check with respect to Isometric and P&ID.

Line walk and mechanical clearance of piping and its piping components and hand over to commissioning department.

Verify Instruments/ Equipment’s are calibrated as per project QA procedures and availability of all the calibration certificates.

Prepare and compile test packages and QA documents for final documentation.

Taking timely actions to satisfy project management team and project management consultants in QA/ QC related issues.

Daily / weekly / monthly reporting of QA/ QC activities to project management and client.

Attending weekly / fortnightly / monthly construction and management meetings.

Monitoring, Follow up & Closing out NCR.

Co-ordination with 3rd party inspection agencies and clients for the inspection activities

Duration- 15th

April 2013 to 18th June 2014, Project- ZUBAIR OIL FIELD DEVELOPMENT PROJECT,

(PIPELINE – API-1104).

Clint – SOC ZFOD WITH ENI IRAQ BV, Company = ENI International Resources Ltd, (Eni Iraq B.V.) Joint QA/QC Department as a – QA/QC Welding & NDT Inspector D UTIES AND RESPONSIBILITIES:

Review and approve Contractor and Inspection and Test Plans for conformance to specification, codes and standards and identification of inspection intervention requirements.

Verify quality control documentation in the form of Inspection and Test Plans, Method Statements and

Work instructions and inspection records / test certificates are available prior to work commencing.

Ensure work sequence is planned and controlled via Implementation and adherence to company approved method statements and work instructions.

Surveillance activities of Pipeline / piping / DGS / Christmas tree/ construction and testing works at site as required by Inspection and Test Plans.

Verify product conformity and full compliance with engineering drawings specification, codes & standards and project contract documents.

Witnessing NDT of Welding works to verify adequacy of construction and inspection methodologies in producing product conforming to engineering drawings, specification, codes & standards and project contract documents.

Review and acceptance, via signature, of process and inspection verification documents in the form of Inspection and Test Plans, Inspection records, checklists and Test certificates.

Monitoring and reporting the works status using Computer software (MS project).

Ensure company regulations with regard to work safety and environment preservation are maintained.

Produce and submit daily Inspection Reports identifying items inspection, acceptance / rejection rates and area of concern.

Carry out surveillance inspection of materials, consumables, welding for the different piping systems, piping supports and steel structure.

Check for the hydro-test packages, witness for hydro-tests and reinstatement works.

Review, endorse NDT and QC reports and prepare daily and weekly reports. Assessment & review of documentation required for the successful work completion.

Witness building, bolts tightening and hydro-testing for Flanged end pipe spools for the successful work completion.

All Pipeline and piping welding activity inspection. Witness welder certification test (WQT) and (PQR) test inspection. Verification welder certificates and ID cards. Reviewing All NDT Mentored. Verification welder certificates and ID cards. Reviewing All NDT Mentored. Witness Non- Destructive test as MT, PT, UT, and VT. Conducting Radiography Film Interpolation piping and pipeline.

Duration–29th

January 2011 to march 2012, Company- Consolidated Contracting International Company Clint- AGIP KCO, an Operating Company. Project=Kasagan Development Excremental Project.(Offshore)D-Island, A-Island,

Joint QA/QC Department, As a = QC Inspector Piping, Welding D UTIES AND RESPONSIBILITIES:

Witness WPS, PQR & WQT, as-per required codes and standard.

Perform and strictly monitor the following inspection activity as-per ITP, QCP and project specification.

Review and verification of materials certificate’s and cutting plan before fabrication.

Identification of materials and stamp transfer.

Monitoring weld joint preparation.

Fit-up inspection, welding inspection and visual inspection.

Welding inspection of Tie-in & repair inspection.

Verification of pipe fit-up and piping diameters.

Preparing of As-built Drawings, weld maps of shop and field welds.

Verification and Approval of heat treatment procedures.

Monitoring of pre Heat treatment before start welding activity.

During welding, check proper parameter as-per was.

Control welding consumables and monitoring records.

Monitoring weld defect rate as-per procedure.

Welder performance monitoring and taking corrective action.

Monitoring PWHT in special requirements.

Verification of PWHT reports with report to procedures and specifications.

Arrange and co-ordinate NDT activity’s.

Evaluation of NDT results (MT, PT, UT, RT).

Especially Interpretation of Radiography’s reports.

Hardness inspection.

Inspection of piping spools and structural modules for testing release.

Assure all the piping fabrication and handling of fabricated spools and installation are in accordance with general arrangements and Isometric Drawings/project specification.

Preparation and review hydro test packs according to P & ID and Isometric and organizing hydro-test.

Arrangement and witnessing of Hydro testing, Leak testing, pneumatic testing according with client specification and approval drawing.

Monitoring -Cleaning & Gauging and Air Drying of Pipelines.

Punch list preparation during line walk for piping spools, piping valves, control valves and its rotation check with respect to Isometric and P& ID.

Line walk and mechanical clearance of piping and its piping components and hand over Commissioning department.

Verify Instruments / Equipment’s are calibrated as-per QA/QC procedures and availability of all the calibration certificates.

Preparing and Compile test packages and QA Documents for final documents.

Taking timely action to satisfy project management team and project management consultants in QA/QC related issues.

Daily/Weekly/monthly reporting QA/QC activities to project management and Client.

Attending weekly / fortnightly / monthly construction and management meeting.

Monitoring, follow up & Closing out NCR.

Co-ordination with 3r d

party inspection agencies and clients for the inspection activity.

Duration – December 2008 to 31 August 2010, Company- Consolidated Contracting International Company (CCIC). Clint- AGIP KCO, an Operating Company. Project = Kasagan Development Excremental Project. (Offshore), D-Island, A-Island.

Joint QA/QC Department, As a = Q C Inspector Welding D UTIES AND RESPONSIBILITIES:

Witness WPS, PQR & WQT, as-per required codes and standard.

Perform and strictly monitor the following inspection activity as-per ITP, QCP and project specification.

Review and verification of materials certificate’s and cutting plan before fabrication.

Identification of materials and stamp transfer.

Monitoring weld joint preparation.

Fit-up inspection, welding inspection and visual inspection.

Welding inspection of Tie-in & repair inspection.

Verification of pipe fit-up and piping diameters.

Preparing of As-built Drawings, weld maps of shop and field welds.

Verification and Approval of heat treatment procedures.

Monitoring of pre Heat treatment before start welding activity.

During welding, check proper parameter as-per was.

Control welding consumables and monitoring records.

Monitoring weld defect rate as-per procedure.

Welder performance monitoring and taking corrective action.

Monitoring PWHT in special requirements.

Verification of PWHT reports with report to procedures and specifications.

Arrange and co-ordinate NDT activity’s.

Evaluation of NDT results (MT, PT, UT, RT).

Especially Interpretation of Radiography’s reports.

Hardness inspection.

Inspection of piping spools and structural modules for testing release.

Assure all the piping fabrication and handling of fabricated spools and installation are in accordance with general arrangements and Isometric Drawings/project specification.

Preparation and review hydro test packs according to P & ID and Isometric and organizing hydro-test.

Arrangement and witnessing of Hydro testing, Leak testing, pneumatic testing according with client specification and approval drawing.

Monitoring -Cleaning & Gauging and Air Drying of Pipelines.

Punch list preparation during line walk for piping spools, piping valves, control valves and its rotation check with respect to Isometric and P& ID.

Line walk and mechanical clearance of piping and its piping components and hand over Commissioning department. Verify Instruments / Equipment’s are calibrated as-per QA/QC procedures and availability of all the calibration certificates.

Preparing and Compile test packages and QA Documents for final documents.

Taking timely action to satisfy project management team and project management consultants in QA/QC related issues. Daily/Weekly/monthly reporting QA/QC activities to project management and Client.

Attending weekly / fortnightly / monthly construction and management meeting.

Monitoring, follow up & Closing out NCR.

Co-ordination with 3r d

party inspection agencies and clients for the inspection activity.

Duration – 27t h

January 2007 to 10 September 2008, Company- Consolidated Contracting International Company (CCIC).

Clint- KNPC. (Kuwait Refinery), Project- OL2K Ethylene project (Onshore) Joint QA/QC Department, As a = Q C Inspector Piping. DUTIES AND RESPONSIBILITIES:

Preparation of Inspection and Test Plan, checklist, procedures and review of construction drawing.

Material Receiving inspection of all RTRP/FRP Pipes and fittings, Gasket, valves, flanges, bolts & nuts in compliance to material list, mill certificates, test reports and correct material specification.

Control of quality for piping fabrication such as fit-up, visual and dimensional inspection conforming to approved for construction drawings.

Responsible for issuance of Non-Conformance Report if any violation and out of standard for piping works.

Conducts quality co-ordination meeting and initiate corrective and preventive action.

Inspection of piping spools fabrication, installation and testing.

Assign as hydro test engineer for all piping and thermoplastic piping, shop fabrication.

Line flushing, air blowing; pressure testing, piping lay-up inspection, relief valve installation, re-instatement and final inspection for mechanical completion.

Responsible for inspection of pipe spools for shop and fabrication such as fit-up, dimensional and visual inspection as Company specification.

Prepare Request for Inspection(RFI) to Project Management Team(PMT) and Project Inspection Division through Quality Management Information system(QMIS)

Witnessed, checked, monitor and inspect of hydro test pressure as per specification (General Requirements for Pressure Testing)

Prepare Non- Conformance Report (NCR), Preventive Action Request (PAR) and initiate corrective Action for every violation and out of Standard of Construction activities.

Close log book entry or surveillance violation.

Duration –9t h

January 2000 to 3r d

March 2006. Company- M C S C Company. Bahrain.

Clint- BAPCO, BANA GAS, BANACO, Project- Various project, like new project, maintenance, Extension projects also. Joint QA/QC Department, As a = P iping Inspector DUTIES AND RESPONSIBILITIES:

Witness and monitor suppliers/contractors work activities, inspection and test in accordance with the approved Quality Plan, ITP, Quality Procedures and etc.

Ensure testing, measuring equipment is fully calibrated as per specification and has current certification.

Witnessing tests like Magnetic Particle Testing, Ultrasonic Testing, Dye penetrant testing.

Preparation of Daily/weekly inspection reports, pre and post-reports, worksheets, noncompliance reports etc.

In process inspection of pre-fabricated items, final inspection and issuing IRN (Inspection Release Note).

Review daily reports like DWR, PMI report, PWHT reports.

Review Hydro/Pneumatic test packages and witness test.

Inspection of Gratings, dimensional checks on fabricated structures/modules.

Verification Mechanical completion Package. Issue of Non- conformance reports & verification of Corrective/Preventive action, Liaison with client inspectors for inspections of Hold and Witness Point.

Witnessing / Inspection of Tie-In and Hot Tap welding activities.

Prepare Request for Inspection(RFI) to Project Management Team(PMT) and Project Inspection Division through Quality Management Information system(QMIS)

Assign as hydro test engineer for all piping and thermoplastic piping, shop fabrication

Duration – March 1998 to 31 may 1999. Company- S K Engineering & Construction Company .Ltd. (Kuwait) Clint- KNPC. (Sabahia Refinery). Project- AGR project, Mina al Adamidis Refinery (Onshore) Joint QA/QC Department, As a = Piping Inspector

D UTIES AND RESPONSIBILITIES:

Inspection on construction of pipe lines (2” to 45” Diameter)as per the code& procedure.

Inspection on materials with test certificate as per the requirements,

Inspection on Welding consumables on arrival & during process,

Inspection in Dimension wise as per drawing requirements.

visual Inspection on Before, during &after Welding as per needs,

Conducting hydro test on the pipe lines & preparing hydro test package.

Inspection on Construction of welded storage Tanks as per Code (API650).

Conducting tests like Tank circularity &Verticality check, Peaking &banding checking,

On each Shell Course On the Tanks, Vacuum Box Test, RF pad Air Leak

Test, Roof Plate Leak Test, Hydro Test, Tank Foundation settlement during & after Hydro Test, As per Procedure. Inspection on SS piping fit up.

Offering NDT Requirements like (PT, MT, UT, and RT&PWHT) as per the Code for the storage tanks.

Inspection on new arrival of equipment in Quality Wise, & Maintaining Records.

Inspection before & after installation on Equipment like level-Co-ordination with dumpy level.

Inspection on fabrication of pressure vessel as per the code.

Inspection on ONSHORE & OFF SHORE STRUCTURAL Steel fabrication.

Technical Qualification

* Certified CSWIP 3.1 WELDING INSPECTOR (TWI). Certificate no- 57188/2

* Certified Radiography Testing course Level -2 of A.S.N.T

* Certified Penetrant Testing course Level -2 of A.S.N.T

* Certified Magnetic Testing course Level -2 of A.S.N.T

* Certified Ultrasonic Testing course Level -2 of A.S.N.T

General Qualification

B.E. (Mechanical Engineering) Karnataka state Open University (Mysore India)

S.S.C Gurukul Vidya mandir. SR,SEC (Board of higher Secondary Education )

H.S.C Gurukul Vidya mandir. SR,SEC (Board of higher Secondary Education

Computer Proficiency

Window Vista, XP, WIN 7, planning software – MS Projects.

Driving License

WB-252********** (India). Validity 31/05/2021.

Family Status: Married; # of Child: One (14+).Family is in India.

Notice period –Immediate

E signed

Kanai debnath

Date

Welding & NDT Inspector



Contact this candidate