Matthew Sniecinski
**** ******** ******, ******** ** 23220
803-***-**** (personal cell) abqyl9@r.postjobfree.com (personal email)
OBJECTIVE
I am a jack of all trades engineer who developed an intense work ethic early that
enabled me to work full time while completing my degree. My diverse work
experience provides strong prioritizing, written and communication skills. I work
extremely well in diverse groups and have excelled on both team and individual
platforms. My 7+ years of engineering experience includes small engineering
business management, government nuclear and industrial settings.
I currently live in Richmond VA, but my wife has recently accepted an offer in
Detroit,and I will will move to Detroit in the near future regardless of employment.
My objective is to acquire an engineering position in or near Detroit, MI, that will
challenge me, allow me to offer new ideas and solutions to, and that has a friendly,
professional environment associated with it.
EDUCATION
Bachelor of Science in Mechanical Engineering; Minor in Mathematics
Saginaw Valley State University; University Center, MI 2005
ENGINEERING EXPERIENCE
Mechanical Engineer / Pressure Relief Consultant; Aerotek Sub-contractor
DuPont Teijin Films, Chester, VA 23836 March 2012 - Current
• Design and verification of safety relief valves and pressure systems.
Incorporate REGAGEPs, DuPont, ASME and API codes and standards into
over-pressurization analysis to specify and acquire relief devices and
associated components.
• High hazard system / Process Safety Management requirements identify and
prioritize equipment evaluations, and in addition to established codes and
standards, dictate the requirements of a pressure relief system.
• Review and validate process calculations, pressure balances, chemical
analysis, fluids, thermodynamics, interlocks, P&IDs & layouts. Consult
equipment / system experts.
• Experience includes Section I and Section VIII applications, steam and
condensate systems, polymer, Dowtherm and other hazardous fluids.
Mechanical Designer / Engineer
RLC Technologies, Glen Allen VA 23059 January 2012 – March 2012
• I left South Carolina (with ample notification) to pursue marriage in Virginia
without lining up a “long-term” position. Once in Richmond, I was fortunate
to find full time work immediately with RLC, providing AutoCad, Solid
Works drawings and shop drawings for fabrication as well as general
engineering and design assistance.
Matthew Sniecinski
2227 Monument Avenue, Richmond VA 23220
803-***-**** (personal cell) abqyl9@r.postjobfree.com (personal email)
ENGINEERING EXPERIENCE (continued)
Mechanical / Process / Reliability / D&D / Design Authority (DA) / Engineer
SRNS; DOE Savannah River Site, Aiken SC 29803 8/2009 – 1/2012
• The Savannah River Site (SRS) is a 300 square mile nuclear site regulated by
the Department of Energy (10 CFR). All aspects of engineering duties
utilized the SRS Engineering Standards, an off-shoot of DuPont Standards
originally used to construct the facility.
• Championed Safety and trained in the Integrated Safety Management Systems
(ISMS), involvement in BBS (Behavior Based Safety) observations and
frequently generated hazard analysis safety reviews for new equipment before
approving for field use.
• Trained and experienced in nuclear/hazardous settings including radiological,
respirator, plastic suit, asbestos/beryllium, lockout, scaffold, security, remote
worker, and hazard identification training.
• Frequently worked in groups, generated operating procedures and managed
remediation teams.
• Began SRNS career as a sub-contractor performing deactivation and
decommissioning of legacy nuclear facilities. Developed a vast amount of
heavy construction experience. As funding for deactivation scope began to
run out, the company hired me on as permanent employee for the TRU
project.
• Trans-uranic (TRU) waste remediation project experience where fissile
materials and nuclear reaction by-products are dispositioned.
• First objective was to modify a cold war nuclear processing facility to
accommodate the needs of the TRU project, then to implement remediation
efforts.
• Acquired Design Authority status over mechanical systems. Responsibilities
included process reliability and trending for fluid and pneumatic systems
(pumps, pipes, tanks, control valves, etc.) HVAC and ventilation, gantry
cranes, motorized container movement vehicles, airlocks, breathing air
systems, monitoring and alarm systems and various other systems.
Project / Design Engineer
Ascend Engineering Inc. (AEI) / VEETech P.C. /; Aiken, SC 1/2006 – 8/ 2009
• This company consisted of the president and myself, and together we built
water and air process treatment, environmental clean-up and bio-diesel
process facilities. The systems I engineered included pumps, piping, pressure
vessels, heat exchangers, steam systems, boilers, ventilation, centrifuges,
distillations and custom equipment (designed by me). I also designed a
parking lot and several civil construction type projects.
Matthew Sniecinski
2227 Monument Avenue, Richmond VA 23220
803-***-**** (personal cell) abqyl9@r.postjobfree.com (personal email)
ENGINEERING EXPERIENCE (continued)
Project / Design Engineer (cont.)
Ascend Engineering Inc. (AEI) / VEETech P.C. /; Aiken, SC 1/2006 – 8/ 2009
• Collaborated with vendors to ensure the mechanical needs of the design were
met. Generating pertinent documentation, including proposals, budgets,
zoning, EPA and construction permits, design drawings, architectural layouts,
P&IDs, start-up and maintenance manuals, waste profiles, service agreements,
etc. Managed construction, start-up and turnover of facilities.
• Often I ran the entire gambit of a small business. Marketing, proposals,
permits, engineering systems, budgeting, presentation, construction and
delivery; basically cradle to grave project engineering.
Engineer Co-Op
Delphi Automotive and SVSU 1/ 2005 – 8/2005
• Worked in a small team setting to develop a new electronic gear shift feature
for the Cadillac Deville, replacing the existing steering-wheel mounted
manual shifter with an electronic push button control shifter with LED
display. In early 2005 the design was innovative, and was used as a
foundation for Current Cadillac steering column designs.
Material Research and Testing Technician at SVSU 9/2003 – 5/2004
• Developed and tested corn-based bio-fuel compositions for presentation to the
Michigan Agricultural Board, fabricated an energy efficient corn-burning
furnace for use at a local homeless shelter. Developed various lab manuals for
testing devices.
INCLUDED WORK EXPERIENCE (Employed since age 15, often in grueling jobs,
worked for my tuitions and can draw on many of those experiences and ethics evolved)
General Construction Worker 1997 - 2005
• Worked with Hayward Construction as well as several other construction
outfits in Bay City, MI, full time and part time while attending school.
Experienced in carpentry, plumbing, roofing, drywall, electrical, painting,
staining, flooring, power washing, etc.
Concrete Laborer 1997 - 1998
• Worked at Northern Concrete Pipe in Bay City, MI. Fabricated
reinforced concrete pipes, mostly storm and sewer pipes, catch basins,
flanges, transition pieces, etc.
• Experienced in re-bar, trowling, cutting torches, welding, fork trucks,
cement pours and set-ups, cast set-ups, etc.
Matthew Sniecinski
2227 Monument Avenue, Richmond VA 23220
803-***-**** (personal cell) abqyl9@r.postjobfree.com (personal email)
PROFESSIONAL SKILLS AND ABILITIES
Proficiency in various design programs (Microstation, AutoCAD, Smart Sketch,
Solid Edge Modeling etc.), Microsoft office programs, Smart Plant, writing
governmental proposals, regulatory and safety documentations, Engineering
Standards recognition.
TRAINING AND CERTIFICATIONS
Completed training and qualifications for 50+ programs including: DA (Design
Authority), F-System Qualifications, USQE (Unrecognized Safety Question
Evaluations) screener, Process Instrumentation Training, Waste Certification
Training, ALARA (As Low As reasonably Achievable) for design and operations
engineering, Industrial Hazards (IH), Consolidated Hazards Analysis (CHA),
Hazardous Controls (HC), Conduct of Ops, Respirator, Plastic Suit and Negative
Pressure Qualification, Lockout Holder Function, Beryllium and Asbestos
training and Behavioral Based Safety (BBS). Complete and documented training
and certifications list available on request.
PROFEESIONAL REFERENCES
(Additional references available on request)
David R. Van Aken Bill Kwiatkowski
Maintenance Manager Assistant Engineering Manager
DuPont Teijin Films Bechtel Savannah River Site
abqyl9@r.postjobfree.com abqyl9@r.postjobfree.com
James Therrell Anuj Saha, P.E.
TRU Engineering Manager President
SRNS Savannah River Site AEI; Ascend Engineering Inc.
abqyl9@r.postjobfree.com abqyl9@r.postjobfree.com
Robert S. Vanpelt, Ph.D. Matt Peterson
Manager, Geological and Quality Plus Services
Environmental Assessment Petersburg, VA 23805
Area Completion Projects Engineering 804-***-****
803-***-**** abqyl9@r.postjobfree.com
abqyl9@r.postjobfree.com