M. PERIYANNAN

add33m@r.postjobfree.com 055-***-****/058-***-**** Dubai, UAE

https://www.linkedin.com/in/periyannan-manickareddy-54710725/ PROFESSIONAL SUMMARY

Objective

To associate as a structural designer with an organization where I can contribute my skills and knowledge in the said domain to fulfil organizational goals with over 14 years of Gulf experience in Oil & Gas Industry for Onshore & Offshore projects. SKILLS

AUTOCAD, MICROSTATION, PDS, PDMS,

OPENROAD, Navisworks Freedom 2015,

CIVIL 3D & REVIT

WORK HISTORY

Senior Designer (Civil & Structures) China Petroleum Engineering Co., Ltd. - Dubai, UAE 06/2014 - 04/2020

Job functions and responsibilities

• Project : Bab Integrated Facilities Project (EPC)

• Location : Dubai

• Client : ADNOC Onshore, Abu Dhabi

• Position : Sr. Civil Structural Designer

• Developed Site grading plan, sections & earth works mto for Offpads, Pads, Mini pads & RDS areas

• Developed Civil GA & Section details drawing for Offpad area

• 2d Drawings extracted and developed with dim annotations

• Concreate & Steel 3d models completely developed in PDS software

• All GA & Detail 2d drawings generated through from 3d model

• Developed Road, Fencing & Paving layouts for offpads, Pads & Mpads

• 3d model & Drawings Developed for all Equipment foundations and steel Bin Umar New Crude Oil Depot Project No.5431/2 (FEED)

• Developed layout for grading, Road & Paving

• Designed GA for typical tank foundation & details for 1st stage oil area

• Designed GA for typical tank foundation & details for relief tank area

• Design & developed GA drawing for fire water tank foundation & details

• Prepared layout for grading, road & paving for water intake & treatment area

• Developed GA & details for typical shelter drawing for all pump & equipment

• Prepared typical drawings for car parking shed

DNO Project – Off spec Tank Design

• Designed layouts & details for onshore structures

• Worked in close association with engineering design, drafting team and multi discipline interaction for project requirement analysis

• Halfaya Project Surface Facility Phase Three – CPF2 Expansion.

• Designed layout for Recycle tanks, condensate pump shelter in flare area & crude oil processing area, HP/LP gas compressor & injection skid area, transformer area

& LP gas air cooler, equipment support plan & filter surge tank vessel area & miscellaneous of concrete & structural steel works.

• DNO IRAQ AS TAWKE 200K Development Project (off-spec tank of 10,000 Cu.m capacity & tank ID 30m.

• Designed layout for circular platform around the tank with foundations to supporting the platform column at every 10 degree.

• Designed Ring wall layout/GA for tank foundation with rebar & concrete quantities, typical ladder steel details for front & side entry at intermediate level of platform and typical anchor bolt details for off-spec tank (30-T-3701)

• Designed road layouts & details of early civil works Phase - 1A for PETRONAS carigali Iraq holding B.V., Garraf operations.

• Designed road layouts for Horizontal & vertical alignment sheets, super elevation & broaden of subgrade & civil layout & details for well pad-d. Security Defence Facilities for Central Processing Facilities Petro China International Iraq FZE Iraq Branch

· Preparation of Site Grading Layout and detail, Road Layouts and Details (Internal Patrol Road), Design and Detailing of Guard Tower and Guard room, Design & Detail of Water tank Supports, Design & Detailing of Flood Protection Dam & related facilities such as Patrol Road, 1m high wall, ramps and stairs for Dam etc. Design & Detailing of Storm Water Drainage system including Storm Water Collection Ditch, Concrete Water collection pools & pipe trenches.

· Garraf Early Civil Works Phase 1(EP)

· Location : Dubai

· Client : Petronas, Iraq

· Garraf Oil Gathering facility Phase 1 (EP)

· Location : Dubai

· Client : Petronas, Iraq

· Halfaya Surface facility FSF Phase 3 (EP)

· Location : Dubai

· Client : PetroChina International, Iraq

· Water Management System Phase 1 (EPCC)

· Location : Dubai

· Client : Petronas, Iraq

· Water Management System (WMS) Phase 1 (EPCC)

· Location : Dubai

· Client : Petronas, Iraq

· DUKHAN FIELD - KHATIYAH NORTH DEGASSING Location : Dubai

· Client : Qatar Petroleum

Senior Designer (Civil & Structural) Wood Group-CCC - Muscat, Oman 09/2011 - 04/2014

Job functions and responsibilities

• Designed layouts & details for onshore structures

• I was exposed to a variety of projects which included: Oil & Gas, Industrial Building & Hydrocarbon

• Provided solutions to build underground services for oil and gas buried pipelines

• Performed equipment and valve operating platforms

• Developed PDMS models for extension of existing platform structures to meet safety with PDO GU standards

• Completed all the projects within the schedule

Principal Designer (Civil & Structural) WorleyParsons - Muscat, Oman 01/2006 - 09/2011

Job functions and responsibilities

• Worked in close association with engineering design, drafting team and multi discipline interaction for project requirement analysis

• Designed 3D models for onshore projects and presented them to the clients for approval

• Developed higher elevated pipe supports structure with RCC foundations for oil & gas lines project with enhanced safety features

• Provided fabrication/construction & installation drawings for reinforced concrete structures in graded areas

• Coordinated with the contractor in site office to ensure and to verify elevations, dimensions and other required information of the work

• Maintained all the project reports, files & vendor drawings Structural Designer Saipem - Chennai, India 12/2004 - 12/2005 Job functions and responsibilities

• Developed G.A. & layout of primary bottom liner 5mm thk.

• Prepared G.A. & details of secondary bottom annular plate 5mm thk. 9% NI

• Prepared G.A. & details of inner bottom annular plate 5mm thk. 9% NI

• Prepared G.A. of suspended deck

• Developed G.A. of roof structure & details

• Maintained all the project files

Structural Designer Valdel Engineers & Constructors - Bangalore, India 03/2003 - 11/2004

Job functions and responsibilities

• Prepared G.A. & layout of vertical jacket with true & apparent batter

• Prepared G.A. & details of cellar deck, main deck & helipad

• Developed of stabbing guide details and boat landing, crane vent boom details

• Developed of Jacket vertical framing plan and off-shore stair development and details

• Prepared of Oil conductor framing with deck extension details

• Prepared of oil conductor protector details and clamp guide details & curved conductor, vertical conductor drift length calculation details etc.

• Developed offshore drawings for the project Songo Songo Gas Development, Clamp On Project, Qatar Petroleum (Bul Hanine Field – PS2 & PS3Q), PH,PJ & STD Well Head Platforms & Pipelines Clough Projects International Pty. Ltd Australia

• Developed the location of fixing clamps based on pre-engineering survey report, Deck extensions details & Conductor make-up length details Senior CAD Draftsman Enmas Andritz Ltd., - Chennai, India 05/2002 - 02/2003

Job functions and responsibilities

• Prepared G.A. & Details For 35 Tph Water Tube Boiler, 100 Tph Biomass Fired Boiler & 4 Tph Water Tube Boiler

• Preparation of G.A & Fabrication drawings for Main Structures, Elevation frames, Columns,

• Main beams, Secondary beams, detail of duct supporting structures, Platforms ladders etc.,

CAD Draftsman Spic Jel Engineering Construction Ltd., - Chennai, India 09/2000 - 04/2002

Job functions and responsibilities

• 3x150 m3/hr dm plant

• Preparation of G.A. and fabrication detail of roof, cross girders, secondary rafters & bracings

• 250mw lignite fired power plant – project

• Preparation of general arrangement and fabrication details of duct drawings, G.A. &

• Fabrication drawings and duct support structures.

• Austrian energy – project

• Preparation of arrangement and fabrication drawings for main structures, elevation frames

• Columns, main beams, secondary beams platforms, ladders

• 1x130 tph baggase & coal fired boiler

CAD Draftsman Jai Engineers & Consultants - Chennai, India 03/1996 - 08/2000

Job functions and responsibilities

• Preparation of Fabrication detail drawings for Columns, Beams, Horizontal and Vertical Bracings and Framing Assembly

• Preparation of drawings for Piping Supporting Structure, Pipe racks, Stair case, Ladder, Platform, Gratings and Handrails

• Preparation of Bill of material for the drawings and material requirements

• Developed G.A. Layouts & details for Hydraulic drawings, fabrication drawings like cylinder barrel, cylinder base or cap, cylinder head, piston, piston rod, seal gland & seals

CAD Draftsman (direct Contract) BHEL - Ranipet, India 10/1992 - 11/1995

Job functions and responsibilities

• Developed layout & G.A. for Water Tube Boiler (Stroke Fired)

• Prepared drawings for 1X24 MW Co-Generation Plant GSML

• Developed layout & G.A & details for Water Tube Boiler (Stroke Fired)

• Developed layouts, G.A.'S and details for Taichung Steam Power Station

• Developed drawings for Esp. in air quality control systems Trainee CAD Draftsman BHEL-BOP - RANIPET, India 09/1991 - 09/1992 Job functions and responsibilities

• Apprenticeship training for 1 year in department of air quality control system

(AQCS)

Tool Room Draftsman Quality Engineers - Bangalore, India 08/1989 - 08/1990

Job functions and responsibilities

• Prepared drawings & details for press components

• Prepared drawings for tool & die making etc.,

EDUCATION

Civil & Structural Draughtsmanship - BHEL/BOP/AQCS/RANIPET 09/1992 1 Year Diploma Course

NAT/NAC PASSED Grade: A

Institute: BHEL/BOP/Training & Development

Govt. Industrial Training Institute - Vellore, India 07/1989 2 Years Diploma Course

ITI passed in Mechanical Draughtsmanship

NCVT Grade: A

Govt., High School - Vellore Dist., Tamil Nadu 03/1986 Secondary School Leaving Certificate (SSLC Passed)

Contact this candidate