Sign in

Electrical Engineer

Bacoor, Cavite, Philippines
January 13, 2020

Contact this candidate


Saturnino Guevara Jr.

Block ** Lot ** Villa Hermosa Subdivision,

Imus, Cavite (Region IV-A) 4103, Philippines

M : +63-908*******

E :

Position Applied: Project Manager (PV)


a)Passport No. & Expiration Date

P1988169A & 21 February 2022

b)Date of Birth & Place

20 April 1974 & Boac, Marinduque, Philippines

c)Age & Sex

45 years old & Male

d)Nationality & Civil Status

Filipino & Married


Roman Catholic


Tagalog, English, (working knowledge: Hindi & Arabic)

g)Educational Attainment

National University – Manila, Philippines

1991 – 1996

Bachelor of Science in Electrical Engineering

h)Summary of Qualifications

Experienced Electrical Engineer with 18+ years, working with prestigious companies in Philippines, Taiwan, Middle East and Africa for large scale projects. Familiar with international standards (NEC, BS, IEEE, IEC, and NFPA 72) and the other local code such as PEC, SASO, DEWA, ADDC/ADWEA, KAHRAMAA, QCS, and QCDD. Capability of reviewing technical submittals such as electrical material submittals, schematic diagrams, method of statements and shop drawings. Knowledgeable in measurement method of work volume/progress, work verifications and reporting. With excellent communication and interpersonal skills.

i)Computer skills

AutoCAD, MEP Revit 2017, MS office (Excel, Word, Project, Outlook, Power Point), Dialux or Relux, Ecodial Advance V4.8 and ETAP 12.6

j)Training / Seminar Certificate

Advance PV Solar

Revit MEP 2017

Sustainability & Environmental Awareness (Module I, II & III)

NCR Investigation & Root cause Analysis

General Health, Safety & Environmental Awareness

Short Circuit Analysis

Electrical System Design approach & ETAP 12.6

k)Summary of Experience

Industry Years of Experience Job Function

Years (Months)

Buildings (Design) 3 (6) Electrical Design Engineer

Bldg. /Infra. (Const.) 3 (1) MEP Project Engineer

Dist. Cooling (EPC) 3 (7) Electrical Engineer

Power Plant (EPC) 5 (2) Electrical Engineer

Reservoir (Const.) 3 (2) Sr. Electrical Engineer

Solar Power (EPC) 1 (5) Project Manager

Experience in Local : 4 years & 5months (Philippines)

Experience in Abroad: 15 years (Taiwan, KSA, UAE, Africa, Qatar)


Company Name & Address :

SJJA Solar Power Enterprises - Imus, Cavite, Philippines

From – To / (No. of Yrs.):

November 2018 – Up to Present

Project / Location :

2 kWp, 3 kWp, 5 kWp, 10 kWp On-grid, Off-grid & Hybrid / Residential & Commercial bldg.., Metro Manila, Philippines

Job Title:

Project Manager / Owner

Job Description:

Prepared solar power Design & budget proposal to prospected client.

Sizing of PV system, Inverter, Battery, wirings, AC & DC protections.

Prepared single line diagram and calculation using PV syst 6.8.3

Prepared specification for all solar PV installation.

Organized meeting with client for approval of design proposal and work schedule.

Prepared the contract agreement to the owner of the project.

Reviewed and approved the IFC Solar power drawings.

Procurement of all Materials.

Ensured that required permits for solar installation are approved.

Ensured the PV Installer are using appropriate safety PPE.

Managed the installation, testing and commissioning of the solar power project.

Managed the turn-over of the solar power project to the client.

Company Name & Address :

Leighton Contracting - Doha, Qatar

From – To / (No. of Yrs.):

May 2015 – July 2018 / (3 Years & 2 months)

Project / Location :

(1)PRPS3 – KM Mega Water Reservoir Project / Rawhdat Rashid, Qatar

Job Title:

Senior Electrical Engineer

Job Description:

Reviewed project specifications, drawings and project quality plan.

Cooperate with commercial team in preparation of technical work package for vendors and sub-contractors.

Performed calculation for CBU/UPS sizing, step & touch voltage for earthing & lightning protection for facility building and cathodic protection.

Reviewed material submittals prearranged by vendors for (e.g. MV Phase shift Transformers, MV & LV VFD, switchgears, MCC, Motors, CBU/UPS, etc.) are complied with standard and project specifications.

Reviewed the Instrumentation, Control & Automation Shop drawings, Material submittals, Method of Statement submitted by our specialist sub-contractors.

Issued RFI to Consultants for EICA design discrepancies and technical clarification.

Guaranteed manpower requirements are enough as per milestone of the project.

Monitored the performance of site electrical engineers and supervisors.

Coordinated with clients and consultant representatives in terms of technical issues confirmations in actual site scenarios encountered.

Attended the site inspection with client/consultant engineers for verification of quality and progress of work.

Direct and overseen the specialist sub-contractor engineers/supervisors work progress for Fire Alarm System and Cathodic Protection.

Conducted coordination with mechanical engineer/vendor for interfacing of mechanical equipment power and control.

Supervised the pre-commissioning activities of major E & C equipment’s such as MV switchgears, LV transformers, VFD’s, Motors, PLC, etc.

Company Name & Address :

KEPCO Engineering & Construction, Inc. – Takoradi, Ghana, West Africa

From – To / (No. of Yrs.):

January 2013 – January 2015 / (2 Years)

Project / Location :

(1)T2 Thermal Power Plant Expansion Project (CCGT 330 MW) / Takoradi, Ghana

Job Title:

Electrical Engineer

Job Description:

Interacted with client/consultant engineer for approval of technical submittals.

Responsible for E & IC works of sub-contractor and ensure the installations are executed according to project specifications, approved shop drawings and method of statement.

Attending meeting with client/consultant electrical engineers together with the construction manager.

Overseen the sub-contractor Hi – Pot test for MV cables and Bus Duct for client/consultant approval.

Responsible for sub-contractor installation / cable testing & termination work in existing substation Yard / buildings for interfacing of 161KV Interface panel, Breaker Failure protection panel, Tariff metering, Bus differential protection panel and RTU cabinets.

Direct and overseen the sub-contractor work activities on cable testing & termination in major electrical & control equipment’s inside the plant (e.g. HV & LV Transformer’s, IPB, NGR, CT’s & VT’s, MV & LV Switchgears, MCC, Motors, Inverter & Battery Racks, DCS & PLC cabinets, MARK Vie, GPP and Fault Recorders cabinet, etc.).

Coordinate with vendor’s technical supervisor for testing of MV & LV motors, DC motors, VFD’s, Switchgears, MCC, etc.).

Checked sub-contractor technical documentation (e.g. ECC) and closing of snagging work for client/engineer approval.

Checked the sub-contractor E & IC as-built drawing.

Supervised the operation & maintenance of electrical work in warranty period.

Company Name & Address :

Schroeder Projekt ElectroMechanic LLC - Abu Dhabi, UAE

From – To / (No. of Yrs.):

July 2009 – August 2012 / (3 Years & 1 month)

Project / Location :

(1)Brighton School Boom Project / near Khalifa Park, Abu Dhabi

(2)CMW-110108-B001 (Zayed Military City Project) / Sweihan, Abu Dhabi

(3)Crown Prince Court Offices Project / Abu Dhabi

Job Title:

MEP Project Engineer

Job Description:

Prepared work schedule, coordinate and monitored the MEP work on site.

Responsible for the compliance of MEP works in local authority standards (ADDC/ADWEA), QA/QC policies and project specification.

Monitored and checked the MEP AutoCAD draftsman shop drawings output.

Ensured the MEP material submittals and method of statements are approved by consultant.

Interacting daily with consultant and client representative to interpret the modification on site.

Performed overall quality control of the MEP work budget, schedule, and man power performance for project manager evaluation.

Communicate effectively with project manager and MEP site engineers to provide assistance and technical support.

Reviewed the engineering deliverables and initiate appropriate corrective actions.

Performed technical review of MEP services and submit RFI’s to consultant.

Initiated decision making and leadership in MEP works on site.

Managed the schedule and performance of the sub-contractors.

Manage/Liaised the approval of ADDC/ADWEA.

Company Name & Address :

ADC Energy System LLC / Dubai, UAE

From – To / (No. of Yrs.):

November 2005 – June 2009 / (3 Years & 7 months)

Project / Location :

(1)Palm District Cooling – 4 nos. / Palm Cresent Jumairah, Dubai

(2)DIP-3 Emicool District Cooling / Dubai Investment Park-3, Dubai

(3)DIP-6 Emicool District Cooling / Dubai Investment Park-6, Dubai

Job Title:

Electrical Engineer

Job Description:

Developed the concept drawings for client presentation (e.g. Single Line Diagram, Electrical equipment arrangement and propose size of electrical rooms).

Prepared electrical shop drawings (SLD, Load Schedule, Lighting and Small Power layout, Cable Containment Cable Ladder/Tray/Trunking layout, Earthing & Lighting layout, Telephone/Data, CCTV layout).

Prepared specifications and data sheets for MV & LV electrical power and distribution equipment such as transformers, switchgear, MDB, etc.

Prepared load schedules for DB’s, CBU Panels, SMDB’s and MDB’s for consultant & DEWA approval.

Reporting with engineering manager to discuss the design discrepancies that need a revision.

Generated electrical BOQ as per approved shop drawings and project specifications.

Coordinated with mechanical and Instrumentation engineer for interfacing equipment’s power and control.

Attended the technical meetings with electrical supplier’s/vendor for technical clarifications.

Answered the technical questions from site electrical engineer and QA/QC to support the site inspection approval.

Reviewed and approval of As-built drawings for submission.

Company Name & Address :

Carlo Gavazzi Arabia Ltd. - Jeddah, KSA

From – To / (No. of Yrs.):

October 2002 – October 2004 / (2 years)

Project / Location :

(1) Steam Power Plant No.4 Project / Yanbu, KSA

(2) Yansab Olefins Plant / Yanbu, KSA

Job Title:

Electrical Engineer

Job Description:

Responsible for E & IC shop drawings (Equipment arrangement layout, Lighting and Small Power layout, Cable Containment Cable Ladder/Tray/Trunking layout, Grounding & Lighting layout, Instrument, Junction Box, Marshalling cabinet’s layout, Hook-up & ILD drawings) for submission and consultant approval.

Responded to consultant comments in shop drawings.

Verified all calculation for circuit breaker sizing, cable sizing, voltage drop and short circuit as per approved mechanical equipment’s.

Generate wiring schedule for electrical and control equipment’s.

Coordinate with E & I site engineers regarding shop drawings modification to suite the site condition and get the consultant approval.

Checked the as-built drawings for submission.

Coordinate with T & C engineers for preparation of manuals and drawings.

Company Name & Address :

Taiwan Matsou Denso Engineering / Houli, Taiwan

From – To / (No. of Yrs.):

October 1998 – December 1999 / (1 Year & 2 months)

Project / Location :

(1)Houli Refuse Resource Recovery Plant Project / Houli, Taiwan

Job Title:

Junior Electrical Engineer

Job Description:

Responsible for E & IC shop drawings (Equipment arrangement layout, Lighting and Small Power layout, Cable Containment Cable Ladder/Tray/Trunking layout, Grounding & Lighting layout, Instrument, Junction Box, Marshalling cabinet’s layout, Hook-up & ILD drawings) for submission and consultant approval.

Coordinate with site electrical engineer/supervisor’s for shop drawing modification as per site condition.

Assisted the QA/QC engineer in E & I technical documentations.

Prepared E & I Bill of Quantities.

Prepared E & I as-built drawings.

Employer / Address :

Kinetic Engineering & Consultancy - Caloocan, Philippines

From – To / (No. of Yrs.):

July 1996 – July 1997 / (1 year)

Project / Location :

(1)Jollibee Store (Main Office) / Ortigas, Philippines

(2)High Rise Building / Shaw Blvd., Philippines

Job Title:

Electrical Design Engineer

Job Description:

Prepared electrical design package for presentations to client and served as a subject in various meeting.

Prepare the detailed engineering deliverables such as construction work packages; Single Line Diagrams, Electrical drawings, specifications, calculations, equipment’s data sheets.

Organized meetings with supplier/vendors and contractors.

Attended the coordination meetings organized by client architects.

Reviewed the work of subordinate engineers and draftsman.

Reviewed and responded to the RFI’s submitted by contractors.

Personal Strength & Profile

Personal Skills:

Team Player, Design, Engineering, Procurement, Project Management, DCS & PLC knowledge, documentation and Reporting.


AutoCAD Drafting, E & C Troubleshooting, Design of Electrical System, Testing & Commissioning

Personal Values:

Being kind and respectful person to everyone is most important for me. Although my personal growth and development is my second priority.

Contact this candidate