S. MEHDI ABBAS

D O B: - **.**.****

Marital Status: - Married

Passport No: -

ac9mf9@r.postjobfree.com

M – 009**********

Application for the post of Mechanical engineer with 6.3 years of well experience in MEP department

Currently associated with “Al Huda Engineering Works” as a Mechanical Engineer in MEP Department

Experienced mechanical engineer with capabilities to execute technical activities according to outlined policies and procedures seeks a position that will provide ownership of development throughout the product life cycle. With very good experience in specifications, validation, evaluation and documentation MEP Systems.

Experience in Managing the activities for HVAC System i.e. AHU, CRAC unit, FCU, Exhaust Fan, Primary/secondary/condenser pump, split unit, Fire damper, volume damper, Access door, diffuser, metal duct, Flexible duct connector, as per SMACNA code, ASHRAE, shop drawing, flow diagram, MS & ITP, T&C Procedure.

Managed QA/QC activities starting from tender stage, design, installation, T & C and Final Handover documents, related to Mechanical

Managed activities related to Plumbing and Drainage system i.e. installation & hydro testing of Cast iron /Clay /uPVC/Ductile/copper/HDPE piping; installation of submersible, potable water pump, water heater, Floor traps, Floor & roof drains, sanitary ware, fittings and accessories as per approved method statement, project specification, drawing and International plumbing code.

Managed activities for all piping system including hydro testing, pneumatic testing, air and steam blowing, flushing & chemical cleaning and also for rotary & static equipment’s i.e. pump, water/air cooled chiller, cooling tower, filtration unit, chemical dosing unit, Tank etc.

Develop and implement PQP, ITP, forms and check lists, risk assessment, flow charts, method statements and operation & maintenance manual. Managing all QA/QC records. Review of Factory acceptance test procedure and ITP, contract document, objectives, material procurement schedule, material submittal, shop drawing submittal, approved supplier list.

Develop and implementation of Quality system & control procedures, Quality Manual, Quality Policy and Quality Objectives to comply to ISO 9001:2008 standards.

Managing QHSE implementation at project sites by planned and unplanned visits. Handle all QHSE communications internally within and externally with clients

Co-ordinate and review customer / client feedback and undertake trends analysis.

Evaluation of supplier’s performance. Coordinating with vendors/subcontractors & enhancing the operations to achieve required quality level.

Managed activities for Firefighting System I.e. Piping system (GI & GRP) for above ground

& Underground, sprinkler system, deluge system, pre-action system, breeching inlet, fire hydrant, portable fire extinguisher, CO2 fire extinguishing system, fire hose reel cabinet, Fire pumps & FM-200 system as per NFPA standard, drawing, MS/ITP and Specification. S. MEHDI ABBAS

Email: ac9mf9@r.postjobfree.com

M- 009**********

Seeking assignments in MEP department & Quality Control, Testing & Inspection, with Reputed organization.

PROFESSIONAL SNAPSHOT

A result oriented professional with proven success of 6.3 years in MEP Department Currently associated with “Al Huda Engineering Works” as a Supervision Mechanical Engineer in MEP Department

Skilled in Management of Mechanical works from design, construction and project handover stage. Managed QA/QC activities related to Piping, Equipment, structure, Plumbing & drainage works, Civil and Architectural

Extensive Knowledge in performing planning periodically in consultation with Construction manager & supervisors has to meet installation, precommissioning, commissioning & handing over programmes.

Effective opening /follow-up and closing meetings

Evaluation of supplier’s performance. Coordinating with the vendors/subcontractors & enhancing the operations to achieve required quality level.

Effective communicator with management skills & strong analytical, problem solving & organizational abilities.

Performed technical advisory role for the MEP Manager CAREER HIGHLIGHTS (TOTAL EXPERIENCE 6.3 Years)

Since Feb’2013 “Contec Airflow Projects” as a HVAC Mechanical engineer in MEP department (India) New Delhi

Since Feb’2014 “Al Huda Engineering Works” as Mechanical engineer in MEP department

Projects:

a) “Supreme Education Council Headquarters Building”; ASTAD project management (Qatar Petroleum) and KEO as Consultant, Project Value: approximate 1 billion QR / 300 million US Dollars Managing Mechanical activities in MEP & QA/QC department- Implementing Quality management system Develop and review of Quality system & control procedures, Quality Manual, Quality Policy and Quality Objectives.

Reported to top management on Performance of Quality and HSE Management System.

Implementing technical Coordination in MEP department. Develop, review and implement PQP, ITP, forms, check lists, risk assessment, method statements, Factory acceptance test Procedure, evaluation of supplier’s performance, operation & maintenance manual. Review of contract document, material procurement schedule, material submittal, shop drawing submittal, approved supplier list, responsibility matrix, project work program, client complaint, client feedback, archive system, commercial records (variation record, payment certificates, cash flow).

Liaison with Project Manager/ MEP manager to ensure that all Quality standards and issues are identified and properly addressed. Coordinating with supplier/subcontractors & enhancing the operations to achieve required quality level. (subcontractors MEP systems, Water features sub-contractor, Irrigation and Landscape contractors, involving in the design issues with all the systems mentioned above)

Ensured that appropriate training be provided to personnel who have an involvement in the quality and HSE aspects of the management system. Managing all QA/QC activities related to Mechanical Works as per approved ITP, MS, QCS, project specification, shop drawing, applicable standards Managed performance feedback process and Quality Register (inspection & testing records) to provide and share quality problems & solutions across business units

Team Management /Co-ordination

Leading as a Mechanical inspector to improve the operational efficiency as well as Mechanical engineer in MEP department for technical coordination KNOWLEDGE PURVIEW AND NOTEWORTHY CREDITS ACROSS ASSIGNMENTS

Managed all the activities related to Mechanical (HVAC, Fire-Fighting, Plumbing & drainage), as per drawings (IFC, shop, coordination), MS/ ITP, project specification, relevant standards etc.

Mechanical:

Managed works starting from design, Installation & hydro testing of various pipes: Carbon/alloy/stainless steel, Pre-insulated carbon steel, Cast iron, Clay, uPVC, copper, ductile iron, grooved pipes.

HVAC System

Managed HVAC system as per SMACNA and ASHRAE standards e.g. Ductwork, dampers, diffuser & registers, louvres, Chillers (air & water cooled), Air handling unit, FCU, CRAC unit, Exhaust Fan etc. Monitored Duct leakage (smoke/light) test, pressure testing for refrigerant piping. Ensuring Interfacing of motorized fire dampers with Fire Alarm Panel & BMS system etc.

Managed Rotary & Static Equipment’s like centrifugal pumps, chillers, cooling tower, turbine & generator & tanks e.g. verticality, leveling, alignment as per applicable drawings, method statement, ITP, project specification, Manufacturer recommendations, FAT Procedure /ITP, standards etc.

Plumbing and Drainage system:

Managed installation & testing and commissioning of Cast iron /Clay /uPVC/Ductile/copper piping; pump (submersible, potable water), water heater, Floor traps, Floor & roof drains, sanitary ware, fittings and accessories as per approved method statement, project specification, drawing and International plumbing code.

Fire –fighting system:

Managed installation and T & C of sprinkler piping, Fire pump, hydrant, hose reel cabinet, Breeching Inlet, Landing valve, fire extinguishers, pre-action system, deluge system, zone valve, alarm check valve etc.

Irrigation system: Managed the Installation of sub-main and lateral lines for the Automatic Irrigation System.Installation of Irrigation sub-main line at Lower Ground Floor High level with all necessary fittings and hanging supports, Ground Floor and at True Ground.Connection of Irrigation Sub-line to the Main Irrigation Tap off point (Irrigation duty point) at Lower Ground Floor Tap off point with Main line shall be provided by others.Installation of Irrigation line to the Ground Floor through the Cores. Core to Ground Floor planting areas shall be provided by others.Installation of ducts where ever required for sub-mains, laterals and control cables under footpaths within the site limits. Installation of drip irrigation system for trees, shrubs and groundcovers. Installation of sprinkler and sprayer system for grass areas.Installation of solenoid valves, control cable in conduit pipes, satellite controller, power cables to the controller, and conduits for communication cables with all other necessary accessories.Testing and commissioning.

Water Feature System: Managed the water feature components comprising the reflective pools & cascade pools It has a feature pump, pipe works with valves/fittings, water inlets/outlets, water over-flow circuit, filtration system, water treatment with automated chemical dosing pumps housed in a designated pump room having their corresponding control systems. Make-up water assembly is directly tapped to the pool basin controlled by electronic water level sensor and interlocked with magnetic solenoid top-up valve in a concealed manner.

Managed various piping system (carbon/alloy/stainless steel) -: including hydro testing, pneumatic testing, air and steam blowing, flushing & chemical cleaning

Fire Alarm System: Managed fire alarm 3rd party interface with items like lifts, AV system, ECBS, FM 200, FCU’s, AHU’s, Sliding doors, Zone control valve, Fire curtain, Air curtain etc Attending inspection with 3rd party & civil Defense authority.

CCTV: Managing CCTV installation & programming, attended MOI inspection EDUCATIONAL CREDENTIALS

BTECH. (Mechanical) from Sharda University, New Delhi CERTIFICATIONS

Ministry of Municipality & Urban Planning (UPDA) License, Qatar

Attended Quality Seminars/training related to following system i.e. Chillers, Cooling Tower, Pumps, Generator, switchgear, chemical dosing unit, AHU, Fire Fighting system, Anchor bolt,

Software packages (MS Office, Window)

PERSONAL DETAILS

Date of Birth : 30 November, 1989; Languages Known : English and Hindi. Passport No : J8645447 (India)

Qatar Driving License: In progress

Nationality : Indian.

Marital Status : Married

Current Location : Qatar

Mobile number : 009**********

Contact this candidate