Sign in

MEP Cad Coordination Draftsman (2D) (BUILDINGS)

Kozhikode, Kerala, India
AED 6500/-
October 27, 2018

Contact this candidate



Naushad Kozhikoden Veetil

Calicut, Kerala, India


Human Resourse Manager

Profile: Male, Married

Date of birth 08.02.1960

Medical Fitness No any health issues

Notice Period Immediately

Last Salary Package 6200/- Saudi Riyal + Accom. + Transport

Passport number & Validity J 1295655, 26.04.2020

Last worked Month & Year October / 2017

Sub: Seeking appointment as a MEP Cad Coordination Draftsman (2D) (BUILDINGS)

Dear Sir/Madam,

I have 14 years experience in Gulf as a MEP Cad Draftsman. My last assignment was with Sterling & Wilson company in Riyadh until october 2017. I shall be grateful if you consider my credentials and give me an opportunity to present myself to you. Attached my Resume and Drawing check list for your kind perusal and approval

I am waiting for your precious response.

Proficiency in MEP Cad work & BOQ:-

1. Expert to prepare MEP Coordination drawings with Sections.

2. Prepare Builders work Drawings for Core wall, slab and Block wall.

3. Prepare RCP & Shaft Coordination Drawings.

4. If required, ability to keep Isometric Section details instead of Revit.

5. Prepare BOQ for HVAC Ducting and Child water.

6. If required, ability to take full BOQ for Civil works (Excavation, Concrete works, Masonry Wall,

plastering, Tile, Wood Etc.).

Method of Work:-

1. Before submission, The prepared Drawings match & ensure with Drawing Check list.

2. Attach Comment’s Compliance Sheet along with Revised Drawing submittal.

3. Prepare daily & weekly work performance report.

4. Prepare BOQ in Excel

Awaiting for your precious response.

Yours truly,

Naushad K.V

Naushad Kozhikoden Veetil

Jennath, Near Nambi Veedu School, Samanwaya Res. No.165, Sneha Nagar Colony, P.O Kallai, Calicut-3, Kerala – India, Mob: 0091 960-***-****,,,

Seeking Appointment as a MEP Cad Coordination Draftsman (2D) (BUILDINGS)

Key skill & Summary

Autocad Version (2004, 06, 07, 08, 10, 12, 13, 15 & 2017)

14 years HVAC / MEP Cad drafting experience

4 Years additional experience on Civil drawings

Preparation of BOQ using Excel

Preparation of Isometric Drawings for pipe line

Excel, Microsoft word & Internet browsing


Draftsman - Civil Course, conducted by National Council for Vocational Training Ministry of Labour, Govt. of India.

Passed pre-degree examination from University of Calicut, Kerala - India.

Certification in Cad drafting

Previous project (Mainly with Contractors):

Casa Administration Building (Sceco Project - K.S.A)

Tariq Haj (Sunset Beach villa Half moon bay - K.S.A)

Ethihad Tower (Abudhabi)

Dental Clinic Hospital (Khafji – K.S.A)

Teaching faculty centre (Alain University – U.A.E)

Adma-opco & Adgas (Abudhabi – U.A.E)

New Aquatic (Swimming pool project in Qatar)

CBQ Multi Tower building (Qatar)

Cooling plant for Difc (32 chillers work in Dubai – U.A.E)

Inter continental Hotel extension building-Al-Khobar

Kapsarc Project – Riyadh

Al Khafji joint operations (MAU Project, K.S.A)

King Saud university projects- Riyadh

Qatar foundation – Qatar

Jabal Ali Airport’s 2013 Air show project – Dubai – U.A.E

Dubai Airport’s new Terminal job (C4) – U.A.E

Lulu Grand Hyatt Hotel & Convention Centre at Cochin – India

Adam Airbase & ROP Project of Oman

Rafal Living Project (High Rise Tower) at Riyad

Work Experience

Sterling & Wilson Middle East – Riyadh, K.S.A Mar. 2016 – Oct 2017


Prepared MEP Coordination Drawing for RAFAL LIVING project (High Rise Tower) at Riyadh using CAD Version-2017.

Sycone cpmc pvt ltd– Banglore, India Oct 2015 – Feb. 2016


Worked for Adam Airbase & ROP Project of Oman preparing MEP Coordination Drawings, HVAC Shop Drawings. Also put comments on reviewed drawings which prepared by junior Draftsmen and venders.

Teamlease recruitment Consultancy – Cochin, Kerala Jun 2015 – Oct 2015


Prepared MEP Coordination Drawing for Voltas project in Lulu Grand Hyatt Hotel & Convention Centre at Cochin using CAD Version-2015.

Ramtech Corporation May 2012 – May 2013


Worked for Qatar foundation, Jabal Ali 2013 Air show project, Dubai Airport’s extension terminal projects receiving short term contact visas to Qatar and U.A.E.

Al Mashariq, SK Engineering, UTC, Radicon & First Gulf Co. Sep’ 10 – Dec’ 11


Worked under different projects and companies holding Free visa in Saudi Arabia. worked 4 months as a Mechanical shop drawing Engineer for KAPSARC Project under SK Engineering Reviewing and putting comments on sub-contractor’s submitted drawings. Also Prepared coordinated sections, Builders work drawings, shop drawing status schedule for 189 Nos. villa etc.

Work continued for other above mentioned companies in hourly and monthly salary basis as HVAC/MEP CAD Draftsman preparing Mechanical shop drawings, Composite drawings, Builders work drawings etc.

Voltas Limited, Dubai – U.A.E Sep’07- May 2009

HVAC / MEP Cad Draftsman

Accountable for the preparation of Coordination, Builders work drawings for Empower DIFC district cooling north plant at Dubai.

Involved in the preparation of Coordination, HVAC shop drawings for Ethihad Site Project infront of International Palace Hotel at Abudhabi.

TRAGS, Doha Mar’05-Apr 2007

Mechanical Draftsman for HVAC, Plumbing and Fire Fighting

Prepared drawings for CBQ multi-tower Building, New-aquatic swimming pool (Asian games project) and private villa project work which include a group of small and big villas inside one plot.

Universal Voltas, Abudhabi - U.A.E Jan’02-Feb 2004

Mechanical Draftsman: Hvac & Plumbing

Involved in the preparation of drawings for BHS LIWA, Shaik Khalifa Hospital, Jabal Dhanna, Al Masood, Ministry of Interior, Saed Eid Al Ghafli, Teaching Faculty Centre- (University Al Ain), Adma-Opco & Adgas, Sheraton Residency, etc. using autocad Ver-2002 & 2000.

Hitech Consultants, Doha, Qatar Nov’99-May 2000

HVAC CAD Operator

Involved in the preparation of HVAC & plumbing drawings of Qgpc Fire Training Center at Dukhan, Shaikh Palace & Albida Plaza (Hotel & Commercial Complex) using autocad release-14.

Pi-Consult, Al-khobar, K.S.A Aug’96-Oct 1998

Cad Operator-1

Preparing drawings on microstation/Autocad depending on client requirement; drawing packages for the sceco-east; Contract no.82520/00. Al-khafji 115/13.8 kv substation and in Tariq Haj (sunset beach villa. Half moon bay).

Preparing drawings for civil, HVAC and plumbing using cad microstation.

Preparing HVAC drawings from single line diagram, plumbing plan and isometric drawings using microstation.

Assmail Airconditioning, Al-khobar, K.S.A Feb’94-Jan 1996

Mechanical Draftsman / CAD Operator

Mechanical draftsman and cad operator in the company, involved in the preparation of Hvac drawings from single line diagram in various residential villa projects. Familiar with and well versed in AutoCAD (rel.12) and other drafting job services.

Co-ordination with other engineers of different disciplines and trades involved in project.

Buildline Engineers & Contractors, Calicut, Kerala, India Jan.’90-Jan 1994

Civil Draftsman / Site supervisor

Prepared Building plan, Service plan and Site plan for Residential buildings to obtain Coorporation / Panchayat license to start construction job.

Supervised site work observing per head manpower coverage, taken measurements and quatities to assist contractors for their work settlement.


For MEP Co-ordination Drawing:

1.Collect latest Civil Drgs. along with F-Ceiling, Elevations, Sections & Schematic Drgs.

2.Collect latest Electro / Mechanical Drgs. Either from Shop drawings or Tender drawings.

3.Update the Collected Drawing’s Revision Status on Title block.

4.Prepare Xrefs for all Corresponding Drawings.

5.Update Color code on each layout considering CTB.

6.Update Title block as per submission Standard keeping Legends for Each service.

7.Update with RCP & R.C.C Core wall Layouts.

8.Arrange uniform Text font & Height considering legends.

9.Ensure no pipes installed inside Electrical Room.

10.Ensure Filter & Compressor removal space for AHU & Chillers.

11.Ensure no Law level Service reflected.

12.Prepare ‘R.F.I’ Sketch for conflicted areas

13.Prepare MEP Coordination Drawing with Effective Sections.

14.Keep One or Two isometric Section detail for good presentation.

15.Attach Comment’s Compliance Sheet along with Revised Drawing Submittal.

For Shaft Coordination Drawing:

1.Ensure this Drawing Coordinated with Core wall opening layout.

2. Provide Velocity bends on Drainage Risers.

For RCP Layout:

Ensure a Uniform arrangement between Service utilities (Lights, Diffusers etc.)

For Core Wall Opening Layouts:

1.Provide R.C.C wall opening schedule along with Tag numbers.

2.Update its Service levels & routing on MEP Coordination Layout.

For Block wall opening Layouts:

1.Provide wall opening schedule along with Tag numbers.

2.Update its Service levels & routing on MEP Coordination Layout.

For Slab opening Layouts:

1.Provide Slab opening schedule along with Tag numbers.

2. Ensure no missing for AD for W-Tank, FD, RD, BMS, SCADA, Breech inlet etc.

Contact this candidate