Joselito C. Banda
PIPING DESIGN ENGINEER/MECHANICAL ENGINEER
EDUCATION:
Bachelor of Science in Mechanical Engineering, March 1996
Bicol University – Legaspi City/Philippines
ACCOMPLISHMENT:
Passed Philippine Professional Regulation Commission (PRC) Mechanical Engineer Board Examination
Registered Mechanical Engineer
OVERVIEW OF EXPERIENCE:
Almost 10 years of experience in the field of Mechanical/Piping discipline of Industrial Power Plant, Geothermal Power Plant, Oil and Gas and (LNG). Piping Design/Detailing, Pipe Support Design/Detailing in using PDS-3D/2D Modeling drawings. Proficient in the use of: SMART PLANT REVIEW(SPR), (PDS-3D) PLANT DESIGN SYSTEM, MICRO-STATION V.7&8(2D and 3D Modeling) and AUTOCAD. Has an extensive computer related experience in Microsoft Windows and Microsoft Office, HVAC design and refrigeration.
WORK HISTORY:
Piping Designer
SapuraKencana Petroleum(Oil & Gas)
Fabrication Yard
Plot D1, Lumut Port Industrial Park
Kampung Acheh, Mukim Lumut, Daerah Manjung
32000 Sitiawan, Perak Darul Ridzuan, Malaysia
EPCIC of REMOTE WELLHEAD PLATFORMS (“RWHPS”)
for FULL FIELD DEVELOPMENT PROJECTS,
NORTH MALAY BASIN (Kesumba/Berganding C & D)
June 9, 2015- December 23, 2015
Job Responsibilities:
Isometric marked-up/Isometric checking generated from PDMS for IFC.
Checking Isometric Drawing from P&ID and Line list for parameter and checking MTO.
Checking of Isometric Shop Drawing generated from PDMS/SP3D .
Isometric spooling.
Checking of Isometric/Pipe Support of Fabrication Drawing.
Provide MTO based on drawing detail applying of ASME, API code for piping.
Checking Isometric Drawing from Red Line marked-up comment.
Pipe Support detailing/ provide marked-up for checking for IFC.
Checking of Pipe Support location in General Arrangement.
Generate Tie-In Index
Conduct a site visit for verification of Piping and Pipe Support
installation.
Ensure the quality of IFC Drawings prior to submission of IFC packages.
Provide As-Built drawing.
Controls documents and drawings that are coming in and going out to the construction
site for construction.
Piping Designer
SapuraKencana Petroleum(Oil & Gas)
Fabrication Yard
Plot D1, Lumut Port Industrial Park
Kampung Acheh, Mukim Lumut, Daerah Manjung
32000 Sitiawan, Perak Darul Ridzuan, Malaysia
TUKAU/BARONIA PROJECT
TUKAU TIMUR DEEP CONCEPTUAL ENGINEERING FOR BARAM
DELTA GAS GATHERING-2 (BARDEGG-2) AND BARONIA ENHAMCED OIL
RECOVERY (EOR) DEVELOPMENT PROJECT
June 2, 2015- July 30, 2015
Job Responsibilities:
Isometric marked-up/Isometric checking generated from PDMS for IFC.
Checking Isometric Drawing from P&ID and Line list for parameter and checking MTO.
Checking of Isometric Shop Drawing generated from PDMS/SP3D .
Isometric spooling.
Checking of Isometric/Pipe Support of Fabrication Drawing.
Provide MTO based on drawing detail applying of ASME, API code for piping.
Checking Isometric Drawing from Red Line marked-up comment.
Pipe Support detailing/ provide marked-up for checking for IFC.
Checking of Pipe Support location in General Arrangement.
Generate Tie-In Inex.
Conduct a site visit for verification of Piping and Pipe Support
installation.
Ensure the quality of IFC Drawings prior to submission of IFC packages.
Provide As-Built drawing.
Controls documents and drawings that are coming in and going out to the construction
site for construction.
Piping Designer
SapuraKencana Petroleum(Oil & Gas)
Fabrication Yard
Plot D1, Lumut Port Industrial Park
Kampung Acheh, Mukim Lumut, Daerah Manjung
32000 Sitiawan, Perak Darul Ridzuan, Malaysia
CARIGALI-PTTEPI OPERATING COMPANY(CPOC) EPCIC of 4 WEELHEAD
PLATFORM and 4 JACKET
Field Development Area of Block B-17
Gulf of Thailand/Northern of Malay Basin
Sept. 2014-To June 26, 2015
Job Responsibilities:
Isometric marked-up/Isometric checking generated from PDMS for IFC.
Checking Isometric Drawing from P&ID and Line list for parameter and checking MTO.
Checking of Isometric Shop Drawing generated from PDMS/SP3D .
Isometric spooling.
Checking of Isometric/Pipe Support of Fabrication Drawing.
Provide MTO based on drawing detail applying of ASME, API code for piping.
Checking Isometric from Red Line marked-up comment.
Pipe Support detailing/ provide marked-up for checking for IFC.
Checking of Pipe Support location in General Arrangement.
Generate Tie-In Inex.
Making sequence of UltrasonThickness Gauging(UTTG)in Isomteric Drawing.
Conduct a site visit for verification of As-Built installation and actual
dimension and clearances of Piping.
Ensure the quality of IFC Drawings prior to submission of IFC packages.
Provide As-Built drawing.
Controls documents and drawings that are coming in and going out to the construction
site for construction.
Piping Designer
SapuraKencana Petroleum(Oil & Gas)
Fabrication Yard
Plot D1, Lumut Port Industrial Park
Kampung Acheh, Mukim Lumut, Daerah Manjung
32000 Sitiawan, Perak Darul Ridzuan, Malaysia
EPCC of LAYANG Development and HOST TIE-IN Project
7Km. East of HIP. NIPPON
Northwest of Miri/Sarawak Malaysia
Nov. 2014-March 2015
Job Responsibilities:
Isometric marked-up/Isometric checking generated from PDMS for IFC.
Checking Isometric Drawing from P&ID and Line list for parameter and checking MTO.
Checking of Isometric Shop Drawing generated from PDMS/SP3D .
Isometric spooling.
Checking of Isometric/Pipe Support of Fabrication Drawing.
Provide MTO based on drawing detail applying of ASME, API code for piping.
Checking Isometric from Red Line marked-up comment.
Pipe Support detailing/ provide marked-up for checking for IFC.
Checking of Pipe Support location in General Arrangement.
Generate Tie-In Index.
Conduct a site visit for verification for As-Built installation and actual
dimension and clearances of Piping.
Ensure the quality of IFC Drawings prior to submission of IFC packages.
Provide As-Built drawing.
Controls documents and drawings that are coming in and going out to the construction
site for construction.
Piping Designer
SapuraKencana Petroleum(Oil & Gas)
Fabrication Yard
Plot D1, Lumut Port Industrial Park
Kampung Acheh, Mukim Lumut, Daerah Manjung
32000 Sitiawan, Perak Darul Ridzuan, Malaysia
PCC of ANGSI Compression Module & ANGSI Facilities Upgrading Project (AFUP)
SapuraKencana Petroleum(Oil & Gas)
Nov. 2014-To Jan. 2015
Job Responsibilities:
Isometric marked-up/Isometric checking generated from PDMS for IFC.
Checking Isometric Drawing from P&ID and Line list parameter and checking MTO.
Checking of Isometric Shop Drawing generated from PDMS/SP3D .
Isometric spooling.
Checking of Isometric/Pipe Support of Fabrication Drawing.
Provide MTO based on drawing detail applying of ASME, API code for piping.
Checking Isometric from Red Line marked-up comment.
Pipe Support detailing/ provide marked-up for checking for IFC.
Pipe Support marked-up/detailing and checking for IFC.
Checking of Pipe Support location in General Arrangement.
Generate Tie-In Index.
Conduct a site visit for verification of Piping and Pipe Support
installation.
Ensure the quality of IFC Drawings prior to submission of IFC packages.
Provide As-Built drawing.
Controls documents and drawings that are coming in and going out to the construction
site for construction.
Piping Designer
SapuraKencana Petroleum(Oil & Gas)
Fabrication Yard
Plot D1, Lumut Port Industrial Park
Kampung Acheh, Mukim Lumut, Daerah Manjung
32000 Sitiawan, Perak Darul Ridzuan, Malaysia
JDA Gas Balancing Evacuation (EVA) Project
Trans Thai-Malaysia(Malaysia) Ltd.
Feb. 3, 2014-To May 2014
Job Responsibilities:
Isometric marked-up/Isometric checking generated from PDMS for IFC.
Checking Isometric Drawing from P&ID and Line list. and checking MTO.
Checking of Isometric Shop Drawing generated from PDMS/SP3D
Isometric spooling.
Checking of Isometric/Pipe Support of Fabrication Drawing.
Provide MTO based on drawing detail applying of ASME, API code for piping.
Checking Isometric from Red Line marked-up comment.
Pipe Support detailing/ provide marked-up for checking for IFC.
Checking of Pipe Support location in General Arrangement
Generate Tie-In Index.
Conduct a site visit for verification for As-Built installation and actual
dimension and clearances of Piping.
Ensure the quality of IFC Drawings prior to submission of IFC packages.
Provide As-Built drawing.
Controls documents and drawings that are coming in and going out to the construction
site for construction.
Piping Designer
SapuraKencana Petroleum(Oil & Gas)
Fabrication Yard
Plot D1, Lumut Port Industrial Park
Kampung Acheh, Mukim Lumut, Daerah Manjung
32000 Sitiawan, Perak Darul Ridzuan, Malaysia
Bechtel/Chevron
Wheatstone LNG Plant
July 1, 2013 – Oct. 30, 2014
Job Responsibilities:
Marked-up of Isometric Drawing for pipe spooling and joint number designation.
Isometric checking generated from SP3D for IFC.
Generate (MTO) Material Take-Off for Isometric applying of ASME, API code for piping.
Marked-up & Pipe support detailing and Checking.
Checking of Pipe Support location in General Arrangement.
Checking of Isometric/Pipe Support of Fabrication Drawing.
Conduct a site visit for verification for As-Built installation and actual
dimension and clearances of Piping.
Ensure the quality of IFC Drawings prior to submission of IFC packages.
Provide As-Built drawing.
Controls documents and drawings that are coming in and going out to the construction
site for construction.
Piping Designer
SapuraKencana Petroleum(Oil & Gas)
Fabrication Yard
Plot D1, Lumut Port Industrial Park
Kampung Acheh, Mukim Lumut, Daerah Manjung
32000 Sitiawan, Perak Darul Ridzuan, Malaysia
North Malay Basin-Integrated Gas Development
Early Production System(KAMELIA EPCC)
WELLHEAD PLATFORM(KMA)
Oct. 17, 2012 -- Dec. 30, 2012
Engineering,Procurement,Construction & Commissioning
(EPCC) of SERENDAH ACCOMODATION- (SN-AA)
SARAWAK DEVELOPMENT PROJECT
Nov. 16, 2012 – April 30, 2013
Engineering,Procurement,Construction & Commissioning
(EPCC) of SERENDAH TOPSIDE- (SN-PA)
SARAWAK DEVELOPMENT PROJECT
Dec. 15, 2012 – June 30, 2013
Job Responsibilities:
Marked-up of Isometric Drawing for pipe spooling and joint number designation.
Isometric checking generated form PDMS for IFC.
Generate (MTO) Material Take-Off of Isometric applying of ASME, API code for piping.
Marked-up & Pipe support detailing and Checking.
Checking of Pipe Support location in General Arrangement.
Making Tie-in index for shiploose.
Marked-up & Checking for Isometric Drawing for As-Built.
Conduct a site visit for verification for As-Built installation and actual
dimension and clearances of Piping.
Ensure the quality of IFC Drawings prior to submission of IFC packages.
Provide As-Built drawing.
Controls documents and drawings that are coming in and going out to the construction
site for construction.
Piping Designer
J&S Engineers/Designer
Makati/Philippines
April 2, 2012- September 30, 2012
Job Responsibilities:
Pipe Support Detailing and Cad-ding by using Auto Cad software.
General Arrangement of Platform Checking, Checking Embedded Plate, Nozzle Orientation Deatiling using Smart Plant Review (SPR) and Auto Cad sotware.
Checking of Isometric Drawing from Smart Plant Review (SPR).
Make a snapshot and Marked-up in Isometric Drawing make a comment to update on the model by the SP3D Designer.
Piping Designer
SOFCON Engineering Consultancy
Saudi Arabia
January 1, 2012- Feb.29, 2012
(WASEA BULK PLANT)
Job Responsibilities:
Sketch and make a Pipe routing of Isometric base on Piping Plan and P&ID.
Generate for Isometric Drawing by using Micro-Station software.
Generate MTO (Material Take Off for Isometric).
Evaluate Piping Material from Vendor base on the Saudi
Aramco Standard ( Piping Specification)
Modification of existing ISOMETRIC base on the site comment using Micro-station.
Piping Designer
FOSTERWHEELER/SOFCON Engineering Consultancy
Saudi Arabia
June. 11, 2011-December 31, 2011
(RIYADH CLEAN TRANSPORTATION FUEL PROJECT)
Job Responsibilities:
Making TIE-IN location for HEAT EXCHANGER Piping.
Modification of TIE-IN in existing ISOMETRIC by using Micro-Station.
Generate MTO (Material Take Off) of TIE-IN.
Cad-ding an ISOMETRIC using Micro-Station software,
and using SAUDI ARAMCO Standard.
Generate Hydrostatic Diagram.
Making TIE-IN Index.
Modification of FACILITY PLOT PLAN in existing PLOT PLAN.
Modification of TIE-IN location in PIPING PLAN
.
Piping Designer
SOFCON Engineering Consultancy
Saudi Arabia
MARCH. 17, 2011- June 10, 2011
(WASIT GAS PLANT DOWNSTREAM PIPELINE)
Job Responsibilities:
Sketch and make a Pipe routing of Isometric base on Piping Plan and P&ID.
Generate for Isometric Drawing by using Micro-Station software.
and using SAUDI ARAMCO Standard.
Evaluate Piping Material from Vendor base on the Saudi
Aramco Standard ( Piping Specification).
Modification of existing ISOMETRIC base on the site comment using Micro-station.
Generate MTO (Material Take-Off) of ISOMETRIC.
Conducting of DISCIPLINE and SQUAD checking for ISOMETRIC.
Piping Designer
SOFCON Engineering Consultancy
Saudi Arabia
February 17, 2011 - March 16, 2011
(YANBU REFINERY)
Job Responsibilities:
Sketch and make a Pipe routing of Isometric base on Piping Plan and P&ID.
Generate for Isometric Drawing by using Micro-Station software.
and using SAUDI ARAMCO Standard.
Evaluate Piping Material from Vendor base on the Saudi
Aramco Standard ( Piping Specification).
Generate MTO (Material Take –Off) of ISOMETRIC.
Conducting of DISCIPLINE and SQUAD checking for ISOMETRIC.
Piping Designer
SOFCON Engineering Consultancy
Saudi Arabia
December 16, 2011 - February 16, 2011
(PETRORABIGH BULK PLANT)
Job Responsibilities
Sketch and make a Pipe routing of Isometric base on Piping Plan and P&ID.
Generate for Isometric Drawing by using Micro-Station software.
and using SAUDI ARAMCO Standard.
Evaluate Piping Material from Vendor base on the Saudi
Aramco Standard ( Piping Specification).
Generate MTO (Material Take-Off) of ISOMETRIC.
Conducting of DISCIPLINE and SQUAD checking for ISOMETRIC.
PDS Piping Designer
SOFCON Engineering Consultancy
Saudi Arabia
February 16,2010- January 16, 2011
Kursaniyah Gas Plant (As-Built)
Job Responsibilities:
Incorporate the comment of site engineer on the AS-BUILT/FRN (Field
Revision Notice) drawing on PDS-3D Modeling (Plant Design System).
Extraction of updated ISOMETRIC Drawing base on the comment on the AS-BUILT
Drawing/FIELD REVISION NOTICE (FRN) .
Equipment Modelling/Nozzle Orientation/Piping Modelling on PDS (Plant Design System).
Checking the Updated Model from Smart-Plant (SPR).
Conducting a QA/QC updated extracted ISO METRIC drawing from AS-BUILT to
FRN drawing.
PDS Piping Designer
Technip Geoproduction (M) Sdn Bhd
Kualalumpur Malaysia
April 14, 2008~Sept. 14, 2009
Koniambo Nickel Project
Job Responsibilities:
Generate General Arrangement of (G.A) through PDS-3D & Micro-Station and
input final comment of Senior Designer based on requirement.
Generate Equipment Nozzle Orientation,preparation for pipe routing base
P&ID, Maintenance accessibility and economical design and base on vendor drawing.
Modeling of Nozzle projection base on standard of Koniambo
Nickel Project.
Equipment modeling through PDS and Micro-Station and verify
clarification by using Smart Plant Review(SPR).
Provide design for Piping Lay-out, Piping Plans and Isometric Drawing,
Layout Piping route for Koniambo Nickel Project.
Designate Pipe Support in all lines for Stress Analysis.
Modeling of Pipe Support through PD-3DS & Micro-Station software.
Generte ISOMETRIC extraction with temporary Pipe Support location for Stress Analysis.
Detailing and arranging of Isometric Drawing of piping.
Preparations of ISOMETRIC Drawings for issuance and for shop and site
fabrication.
Modeling of Pipe Support thru Pelican Forge.
PDS Piping Designer
Chiyoda Philippines Corporation
Pasig, Manila
June 2007 ~April 5, 2008
AKG – 2 Project Block 4-6
Job Responsibilities:
Responsible for designing and developing of Special Pipe Supports based requirements of the stress analysis on the lines.
Check clashing of lines through Smart Plant Reviewer(SPR) & PDS-3D Models.
Modeling of required Equipments Nozzle orientation & coordinates and Pipe routing requirements through PDS-3D.
Generate General Arrangement (G.A.) through PDS-3D Model.
Generate ISOMETRIC extraction.
Taking Snap-shot views of Header Lines, Equipments Nozzle orientations, and Utility lines through SPR for designing of Special Pipe Supports and other related requirements. Input & verify clarifications using Smart Plant Reviewer, PDS -3D Models & Micro-Station software.
PDS Piping Designer
Chiyoda Philippines Corporation
Pasig, Manila
Dec.2006~May 2007
QGX Train – 5 Project
Job Responsibilities:
Responsible for designing and developing of Special Pipe Supports based on requirements of the stress analysis on the lines.
Check clashing of lines through Smart Plant Reviewer (SPR)& PDS -3DModeling.
Generate General Arrangement (G.A.) through PDS-3D Models & Review these generated models in Micro-Station & Input final comments of Senior Designer based on requirements.
Taking Snap-shot views of Header Lines on SPR for designing of Special Pipe Supports and other related requirements.
Input & verify clarifications using Smart Plant Reviewer(SPR), PDS-3D Models &
Micro-Station software.
Generate ISOMETRIC Extraction
Piping Designer
Chiyoda Philippines Corporation
Pasig,Manila
Oct . 2005~April 2006
QGX Train – 4 Project
Job Responsibilities:
Responsible for designing and developing of Special Pipe Supports based on requirements of the stress analysis on the lines.
Check clashing of lines through Smart Plant Reviewer (SPR)& PDS -3DModeling.
Generate General Arrangement (G.A.) through PDS-3D Models & Review these generated models in Micro-Station & Input final comments of Senior Designer based on requirements.
Taking Snap-shot views of Header Lines on SPR for designing of Special Pipe Supports and other related requirements.
Input & verify clarifications using Smart Plant Reviewer(SPR), PDS-3D Models &
Micro-Station software.
Generate ISOMETRIC extraction.
Mechanical Fitter
DESCO INCORPORATED/TIWI GEOTHERMAL POWER PLANT
UNIT 1,2,5 & 6 Rehabilitation Project
Tiwi,Albay
June 26-January 26, 2004
Plant Mechanic
Marubeni-Mindanao II Geothermal Power Plant {MIIGP}
Turbine/Generator Major Overhaul and Rehabilitation Project,
Mt. Apo, Bgy.Ilomavis, Kidapawan City
January 8-29, 2005
Job Responsibilities:
Assist Japanese staff to fix and to balance of Pumps and Motors.
Assist to fix instrument gauges.
Assist for commissioning and leak testing.
Mechanical Engineer (MEPFS)
ARANAZ CONSTRUCTION MANAGEMENT CONSULTANCY
Taft, Metro Manila
May 18, 2016-August 30, 2017
Assist/Supervise/Monitoring all MEPFS works.
HVAC design & Refrigeration, checking air-conditioning facility @ every unit for high rise
building.
Mill Engineer
ALINDECO Albay Agro Industrial Development Corporation
Balading, Malinao, Albay
Malinao, Albay
Jebruary 1, 2017 to Present.
Job Responsibilities:
Maintenance engineering work of the Plant for all equipment, Digester,
Pumps and Motor, Dryer, Boiler and other equipment and instrument.
Supervise and monitoring of manpower for repair, fabrication and
installation of all plant equipment.
Implement Daily Engineering Report for Power Consumption, Steam
Generation & Steam Consumption, Water Consumption.
Conduct (EIC- Condition-Equipment Based Checklist) for all equipment and instrument for
for the Plant.
Assist for the repair and installation of Pumps & Motor and other equipment.
Prepare scheduling/planning for maintenance works for target date for operation.
TRAININGS AND SEMINARS: 1
• 16 Life Savings Rules
Sapurakencana Petroleum
• ZAP Commitment
Becthel/Chevron
Sapurakencana Petroleum
• SP3D Software Training
J & S Engineers/Designer
Makati, Philippines
• PDMS Software Training
Sapurakencana Petroleum
Sitiawan, Perak
Malaysia
• Management Awareness Orientation
Chiyoda Philippines Corporation
• Lecture on Different Piping Nomenclatures (Components, Standards, etc)
Chiyoda Philippines Corporation
• Plant Design System (PDS-3D) and Micro-Station Software Hands-On Training Quality
Chiyoda Philippines Corporation
• Familiarization with Different Engineering Disciplines/
ISO Awareness/Team Building Seminar
Chiyoda Philippines Corporation
• Maintenance and Operation Department
National Power Corporation, Tiwi, Albay
• Ecological Solid Waste Management
• Refresher Course on Barangay Legislation
• Barangay Administration and Development Seminar Workshop
• Safety and Environment Engineering and Power Plant Design and Operation Appreciation Course on
Pneumatic Technology SMS Pneumatic
• Personal Enhancement Program
• Training hands-on repair and installation of equipment on the Plant (ALINDECO)
OTHER SKILLS:
Photography
PERSONAL INFORMATION:
Nationality : Filipino
Civil Status : Married
Sex : Male
Height : 5’3’
Weight : 154 lbs.
Date of Birth : May 09, 1971
Place of Birth : Tabaco City, Philippines
Language Spoken : Tagalog and English
E-mail : ac5v9k@r.postjobfree.com
Mobile Number : 091********