CURRICULUM-VITAE
MOHD SAQUIB
Address- ***, Near,ya rasool allah masjid
Kap talab zaitoon pora bhiwandi
Thane: - 421302
Email: ac59vg@r.postjobfree.com
Contact No: +91-898******* / +91-989*******
CAREER OBJECTIVE:
To gain knowledge and improve from the resources those are provided from the organization.And the organization being the spring board, which helps me to jump up in my career.
TECHNICAL PROFILE:
Quality Control & Engg. Inspection (ATI, HYD, Govt of India)
Non Destructive Testing Level II ASNT
Penetrant Testing (PT)
Magnetic Particle Testing (MPT)
Ultrasonic Testing (UT)
Radiography Testing (RT)
Visual Testing ( VT)
WORK EXPERIENCE: 5 YEARS
•Company : Mukul Engineering Work.
•Client : Mukul is Approved by Chief Controller of Explosives
Government of india and major third party
•Designation : QC ENGINEER
•Project : (Inclusive date: 1-11-2016 To 7-10-2017)
JOB RESPONSIBILITY:-
Radiography film viewing, witnessing of PT, UT and MPT Test.
Monitoring of welder and checking of welding.
Inspection of Surface preparation and painting.
Stage wise inspection of Storage tanks
Fit up and Weld visual Inspection tank joints.
All types of tank related testing witness.
Weld Visual Inspection of Piping Joints as per Project Specification&B31.3 Code.
Fit up Inspection of Pipe & Fitting Joints as per Isometric Drawings.
Monitoring welding consumables log sheet (In Baking, Holding and portable ovens).
Checking of Hydro test package as per client requirement.
QA/QC co-ordination.
Scheduling & documentation pertaining to Construction activities
Visually checking & Inspection of fitup & welding.
•Company : RBP ENGG & CONT. PVT. LTD.
•Client : BHARAT PETROLEUM CORP.LTD.MUMBAI
•Designation : MECHANICAL ENGINEER
•Project : (Inclusive date: 7-04-2016 to20-10-2016 )
JOB RESPONSIBILITY:-
Fabrication and laying of bottom plate & annular plate of tank.
Fabrication and erction of shell plate.
Shell plates erection by conventional jacking method.
Fabrication and erction of curb angle & wind girder.
Fabrication and erction of roof plate.
Installation of cooling system & foam system of tank.
Testing of vacuum box test of annular plate & bottom plate.
Testing of kerosene chalk test of shell to annular plate.
Testing of salt content test of bottom & annular plate.
Installation of roof nozzle & shell nozzle.
Periphery handrail installation.
Fabrication and erction of deck & pontoon.
Installation of primary seal & secondary seal.
Erection & dismantling of scaffolding arrangement.
Shotblasting & painting operation under controlled conditions using de-humidifier.
Preparation of daily & weekly progress reports.
Monitoring of resources deployed daily basis.
Scheduling & documentation pertaining to Construction activities
Visually checking & Inspection of fitup & welding.
After all types of sequencing of inspection weather it may be fabrication, erection, welding, testing etc
Stage wise fit up inspection.
Preparation of billing invoice as per client payment terms & conditions.
•Company : RBP ENGG & CONT. PVT. LTD.
•Client : BHARAT PETROLEUM CORP.LTD.MUMBAI
•Designation : MECHANICAL ENGINEER
•Project : CDU-4 & Tankage Project (Inclusive date: 7-12-2015 to 20-03-2016)
JOB RESPONSIBILITY:-
Fabrication and laying of bottom plate & annular plate of tank.
Fabrication and erction of shell plate.
Shell plates erection & lifting by conventional jacking method.
Fabrication and erction of curb angle & wind girder.
Fabrication and erction of roof plate.
Installation of cooling system & foam system of tank.
Testing of vacuum box test of annular plate & bottom plate.
Testing of kerosene chalk test of shell to annular plate.
Testing of salt content test of bottom & annular plate.
Installation of roof nozzle & shell nozzle.
Periphery handrail installation.
Fabrication and erction of deck & pontoon.
Erection & dismantling of scaffolding arrangement.
Shotblasting & painting operation under controlled conditions using de-humidifier.
Preparation of daily & weekly progress reports.
Monitoring of resources deployed daily basis.
Scheduling & documentation pertaining to Construction activities
Visually checking & Inspection of fitup & welding.
After all types of sequencing of inspection weather it may be fabrication, erection, welding, testing etc
Stage wise fit up inspection.
P
•Company : SAWANT ENGG. WORKS
•Client : HINDUSTAN PETROLEUM CORP.LTD.MUMBAI
•Designation : QC ENGINEER
•Project : CDU -1 (Inclusive date: 25-10-2014 To 27-11-2015)
JOB RESPONSIBILITY:-
Radiography film viewing, witnessing of PT, UT and MPT Test.
Monitoring of welder and checking of welding.
Inspection of Surface preparation and painting.
Stage wise inspection of Storage tanks
Fit up and Weld visual Inspection tank joints.
All types of tank related testing witness.
Weld Visual Inspection of Piping Joints as per Project Specification&B31.3 Code.
Fit up Inspection of Pipe & Fitting Joints as per Isometric Drawings.
Monitoring welding consumables log sheet (In Baking, Holding and portable ovens).
Checking of Hydro test package as per client requirement.
QA/QC co-ordination.
Scheduling & documentation pertaining to Construction activities
Visually checking & Inspection of fitup & welding.
•Company : GOPINATH ENGG.CO.PVT.LTD.
•Client : BHARAT PETROLEUM CORP.LTD.MUMBAI
•Designation : PIPING ENGINEER
•Project : DHT Project (Inclusive date: 10-5-2013 To 14-6-2014)
JOB RESPONSIBILITY:-
Work, Equipments and man power planning,
Fabrication, Erection, supporting, & alignment.
Mechanical Clearance & Loop Clearance.
Hydro testing of pipe lines.
Box up.
Preparation of Weekly and Daily Progress Report.
Preparation of Measurement Report for Completed work.
Preparation of look ahead for material requirements.
Estimation of work front / Materials Requirements Analysis Report.
Inspection of Piping Fabrication, Erection, Hydro-testing, Pressure Test, Line checking .
Responsible for routine piping inspection activities for ongoing plant expansion
Pre-commissioning activities
Check, Verify and review installation of gaskets supports, check valves internals flow orifice strainers instruments and control valves prior to line re-instalment as per the latest drawings for construction
•Company : RBP ENGG & CONT.PVT.LTD.
•Client : BHARAT PETROLEUM CORP.LTD.MUMBAI
•Designation : SITE SUPERVISOR
•Project : CDU-1 (Inclusive date: 5-05-2012 To 02-04-2013)
JOB RESPONSIBILITY:-
Work, Equipments and man power planning,
Fabrication, Erection, supporting, & alignment.
Mechanical Clearance & Loop Clearance.
Hydro testing of pipe lines.
Box up.
Preparation of Weekly and Daily Progress Report.
Preparation of Measurement Report for Completed work.
Preparation of look ahead for material requirements.
Estimation of work front / Materials Requirement Analysis Report.
Inspection of Piping Fabrication, Erection, Hydro-testing.
EDUCATIONAL QUALIFICATION:
Diploma
Branch: Mechanical Engineering
University: (M.S.B.T.E) From MUMBAI
College : SHREERAM POLYTECHNIC IN AIROLI NAVI MUMBAI
FIELD OF INTEREST:
Oil & Gas
Piping/ tank
QA/QC
COMPUTER KNOWLEDGE:
MS OFFICE -2010: Word, Excel, Power Point.
Basics of AUTOCAD (2D, 3D).
SKILLS& STRENGTHS
High energy levels with never say die attitude.
Team work with leadership Qualities.
Good inter personal and team skills.
Willingness to learn new things & hard worker.
PASSPORT DETAILS:
Passport No -M7731793
Date of Issue -13/04/2015
Valid upto -12/04/2025
Place of Issue - THANE
PERSONAL INFORMATION
Date of Birth : 14/1/1992
Fathers Name : Shaukat ullah
Permanent Address : 175, Near ya rasool allah masjid Kap talab
zaitoon pura bhiwandi Thane: - 421302
Gender : Male
Marital Status : Single
Nationality : Indian
Religion : Islam
Language Known : English, Hindi,Urdu & Marathi
DECLERATION:
I hereby declare that the information mentioned above is true to the best of my knowledge & belief.
Place: Mumbai
Date: Mohd Saquib