Quality Assurance Project

Position : QA/QC INSPECTOR – PIPING/WELDING

Name: RONEILEX P. DOMINGO

Mobile Number +63-092******** roaming, +966-0565730868 saudi)

Email Add. :**********@*****.***

Nationality : Filipino

Date of Birth : August 05, 1982

Educational Qualification : Bachelor of Science in Mechanical Engineering

Years of Experience : 6+ Years

Geographical Areas of Work : Philippines, Saudi Arabia & Qatar

Languages Known: English & Tagalog

Marital Status Married

Passport Number :XX1248273

Bachelor of Science in Mechanical Engineering from Technological Institute of the Philippines, Manila, Philippines

Date of graduation: April 12, 2004

PRC Registration #: 0064193

Saudi Aramco Personal #: 70009451

CSWIP 3.1 Cert. # 55037

Qatar Petroleum Piping/Welding Inspector Approved

International Codes Standard Used

ASME B31.1 / B31.3, ASME Sec. V, VIII Div.2, IX, API 1104, API 650, API 620

AWS D1.1 BS Standard, Aramco & QP Standard

Working Experience

Construction Technical Services Arabia LTD (CTSA)

(January to Present)

Designation: Mechanical Inspector Saudi Aramco Project Inspection Division (SAPID)

Black Cat Engineering & construction W.L.L, Qatar

(July 2009 October 2011)

Designation: QA/QC Inspector – Piping/Welding(Mech)

Nesma & Partners Const. Co. Ltd, Saudi Arabia

(June 2008 to April 2009)

Designation: QA/QC Inspector - Piping

Consolidated Contractors Company (CCC), Saudi Arabia

(October 2006 to February 2008)

Designation: Piping Inspector

Mega Gem Wiring System Inc., Philippines

(July 2005 to August 2006)

Product Development Engineer & Quality Assurance Officer

January 2012 to Till Date: Company: Construction Technical Services Arabia

Position : Mechanical Inspector Saudi Aramco Project Inspection(SAPID) Location : Yanbu KSA.

Project : Yanbu Export Refinery Project (YERP) Tank Farm Package

Client : YASREF (Yanbu Aramco Sinopec Refinery)

Responsibilities

Work as Mechanical Inspector client representative responsible for all quality concern to mechanical activities in my package jurisdictions such as welding, piping, storage tank construction comply with the standard. Review and approved quality document such Inspection Test Plan (ITP), Procedures, and Method Statement Conduct contractor QC interviews. Initiate weekly quality meeting with the contractor to discuss quality highlight such as Log Book Entry, Proactive Notifications, General Comment, Standard Violation, NCR to ensure that such problems does not repeat. Liaise with the PMT regarding corrective actions against NCR. For welding make sure that all employed welding procedure and welder are qualified. Conduct site surveillance of welding activities before, during and after welding basis to ensure that they followed the WPS and related standard. For tank inspection cylindrical cone, floating roof, spheroid, spherical, check the foundation level, tank bottom plates laying inspection, material traceability. Shell plates erection, fit up of vertical & horizontal joint, nozzles orientation, stair & structural related to tank, Bottom test(vacuum box test), oil penetrate test(OPT) Pneumatic test of nozzles pad, Plumbness( verticality), peaking, banding, roundness. Verification of NDT requirement according to code API 650, API 620 ASME VIII div.2

March 2011 to October 2011 Company: Black Cat Engineering & Construction W.L.L

Position : QA/QC Inspector – Piping/Welding

Location : Dukhan, Qatar.

Project : Epic for Produced Water Treatment & Injection Phase II

Client : Qatar Petroleum.

November 2010 to March 2011 Company: Black Cat Engineering & Construction W.L.L

Position : QA/QC Inspector – Piping/welding

Location: Dukhan, Qatar.

Project : Epic of Sweet Fuel Gas Supply to Dukhan Consumers

Client : Qatar Petroleum

July 2009 to November 2010 Company: Black Cat Engineering & Construction W.L.L

Position : QA/QC Inspector – Piping/Welding

Location: Dukhan, Qatar.

Project : EPIC of Smokeless Flare & Automatic Blowdown System and New Control Room at (Fahahil Stripping Plant Dukhan)

Client : Qatar Petroleum

Responsibilities:

Piping:

Preparation & Review of Test Packs for hydro testing, Line checking as per the requirement.

To conduct in-process shop/field production inspection including verification and acceptance of all quality control hold point indicated to travelers against approved drawing and specification.

Review and checked the flow and orientation of piping on AFC drawing base on actual field installation at site.

Checked dimension and location of on plot piping as per required on the AFC Isometric & P&ID drawings.

To check specified materials given on the AFC drawing including classification of bolts and gaskets.

Materials checked by color coding, wall thickness and stamping of pipes.

Perform line check and issue internal punch list to construction section.

To fill date of line check and date of internal punch completion in control sheet.

Conduct final inspection, prepare punch list and verify completion of punch items

Checked and review all item as per line class

To conduct final inspection of materials from laydown area to be delivered at fabrication shop and at site.

Prepare and review Hydro test package and other necessary document prior to hydro testing such as P&ID, Isometrics drawing, weld log sheets and NDT reports

Witness hydro & pneumatic test, water flushing, service test

To prepare all equipment punch lists and verifies all items are in place and act as an agent for the Company during punch list activity.

To collate all relevant documentation for the job and apply the data to the creation of a Test Pack to undertake pre-hydro test inspection activity

Welding:

Conduct Welders Qualification Test (WQT) base on the given procedures with respect to applicable code, standard and specification for the requirements of the project.

Checked fit-up/dimension, orientation of pipe and prior for welding.

Checked visual inspection of weld joint for monitoring and acceptance.

Prepare inspection reports such as weld visual, weld summary, Hydro test reports.

Coordinate NDT test of piping system such as RT, PT, MT, Hardness Test based on standards and project requirements

Checked and monitor the welding percentage repair rates of individual welder.

To conduct in-process shop production inspection including verification and acceptance of all quality control hold point indicated to travelers against approved drawing and specification.

Make sure that all NDT requirement is completed prior to release for painting

Preparation of Hydro test packs.

Witnessing of piping hydro test.

Review of project related procedures and method statements

Execute quality assurance inspection on project/construction works to ensure compliance with QP Standards.

Review of material test certificates.

Review and interpretation of RT films as per codes and specifications,

Supervising and monitoring all welding related inspection activities.

Witnessing of Non Destructive test, Pneumatic test, Hydro test and Load test.

Ensure that inspection stages are carried out in line with approved inspection plans and/ or procedures.

To undertake verification of welding machines to ensure equipment meets job requirements specification and provide verification of electrode baking and holding temperature including control and issue

To monitor Welder performance and conduct visual inspections of welds and repairs of welds in accordance with Company procedures and international codes of practice.

To coordinate with clients to undertake Procedure Qualification Tests (PQT) and inspections of prepared test specimens and witness destructive tests

To identify and prepare Welding Procedure Specification (WPS) & PQR for jobs as per project specifications and verify Welders meet PQR requirements

June 2008 to April 2009 Company: Nesma & Partners Const. Co. Ltd.,

Position : QA/QC Inspector – Piping

Saudi Aramco Personal #: 70009451

Location: Saudi Arabia

Project : Shaybah Central Processing Facilities

(Gas & Oil Separation Plant Project) GOSP-4

Client : SNC Lavalin (Saudi Aramco Project)

Responsibilities:

Responsible for inspection of materials as per codes and process standards specification.

Performing inspection of fit-ups and dimensions, orientation as per drawing specification.

Monitoring work and ensuring uniformity and consistency in the application of the procedures in conformance of project specification requirements.

Coordinate NDT test of piping system such as RT, PT, MT PWHT, BHN based on standards and project requirements.

Responsible for inspection in accordance with specifications and procedures of the piping fabrication and erection / installation and the compilation / retention of QC reports and records.

Prepare and review Hydro test package and other necessary document prior to hydro testing such as P&ID, Isometrics drawing, weld log sheets and NDT reports.

Conduct in-process inspection during pipe installations and construction.

Request for Inspection (RFI) and witness of hydro& pneumatic Testing.

Responsible for inspection of internal cleanliness of piping system such the method of pressurized Air Shock Blowing (PASB), Chemical, Hydro-milling cleaning.

Conduct and prepare surveillance reports on all piping activities which does not conform to Aramco and ASME standards.

Verification & clearing of”Ä” item construction punch list.

Ensure drawings are in current revisions and approved by the customer authorized representative

Prepare reports and documentations for all inspection and testing activities.

Familiar on Saudi Aramco code and standard using SAIC, SATR, SATIP and SAES for inspection.

Involved in hydrotesting of all valves to be used on all aspects of piping system.

Responsible for conducting the inspection activities and enforcing the applicable standards,

Line checking of pipelines, which cover check-up for proper instillation and of standard pipe supports and in accordance with isometric drawing. Inspect and witness piping re-instatement and bolt torquing.

Monitoring chemical cleaning of storage tanks (flushing, degreasing, acid cleaning and passivation) and final internal inspection.

October 2006 to March 2008: Company: Consolidated Contractors Company (CCC)

Position : Piping Inspector

Location: Saudi Arabia

Project : KGP (Kursaniyah Gas Plant Project)

Client : Bechtel Technip Joint Venture (BTJV)

(Saudi Aramco Project)

Responsibilities:

Responsible for inspection of materials as per codes and process standards specification.

Numbering of welding joint’s or weld mapping on the isometric drawing which is

to be use for welding control, welding progress and for NDT inspection.

To make field change sheet (FS) and give instruction to the foreman or supervisor

the vital modification of piping on the field.

Review / identify joints, WPS, stamping, marked up on isometric drawings.

Spool tagging, cleaning, air blowing flanged faced and gaskets inspection prior to erection.

Prepares and coordinates Request for Inspection (RFI) for orifice flange internal grinding and pneumatic test for reinforcing pads.

Reporting of daily activities / progress to the Superior and coordinating to client's QC Engineer.

Fabricate and install pipe spools in accordance with the WPS and specifications, checking dimensional accuracy (degree of slope, plumb, level, alignment, square etc.)

Responsible for the monitoring and inspection of all piping fabrication & erection

Involved on all types of piping testing such as hydro test, pneumatic, and visual testing.

Inspect and records all Non-Destructive Testing of piping system as per requirements.

Responsible for directing quality control activities to ensure that standard of quality in all aspects of production activities is attained.

Preparation of test packages and other necessary documents prior for hydro testing such as weld log report sheet, and RT log sheet. Maintain quality system records.

July 2005 to August 2006: Company: Mega Gem Wiring System Inc.

Position :Product Development Engineer & Quality Assurance Officer

Location: Philippines

Responsibilities:

Product Development Engineer:

Develops and coordinates with customer regarding new products for development.

Prepares Bill of Materials of all materials used for costing particular for new items Prepares production cutting specification, working Instructions, Product Specification Guides, Actual Samples

Coordinates all necessary production equipment for mass production in terms of tooling, set up, Testing Equipment, and Fixtures

Coordinates with suppliers for new materials for production use.

Prepares necessary documents for qualification, engineering analysis report, Declaration Forms for R.oH.S

Collects necessary tack-time for issuance of new item/ product standard cycle time

Quality Assurance Officer

Collects data for study of rejection rate for quality efficiency.

Prepares and collects data regarding quality problems and formulates corrective actions.

Conducts quality assurance meeting that promotes awareness comprehensive quality analysis.

Line monitoring during in process to ensure during actual process.

Evaluates all production quality rejection and formulates long term corrective action plan

TRAINING AND SEMINAR ATTENDED:

CSWIP 3.1 Welding Inspector TWI October 04-08, 2010

Comprehensive Training Program for Oil and Gas Drilling

Introduction to Hydrogen Sulfide H2S RODECH

IADC Rig Pass Orientation & Basic Safety Awareness RODECH

First Aid at Oil & Gas Drilling Rig RODECH

Basic Introduction for Drilling Technology RODECH

Basic Occupational Safety and Health for Construction RODECH

I certify that all written above are true with the best of my last knowledge.

RONEILEX P. DOMINGO

Applicant

Contact this candidate