Engineer Maintenance

Curriculum Vitae

Jarlan Austria Fule [pic], #** Bo. San Nicolas San Pablo City, Laguna, Philippines

? Cell phone No.: 091********

Home: (049-*******

WORK EXPERIENCES

SENIOR SALES & APPLICATION ENGINEER

Le Champ (S.E.A.) Pte Ltd

July 18, 2011 to Present

Job Description

. To meet Sales Target set by the Company and assist Division Manager to

achieve Company's objective

. Promote and sell the Company's products to existing and new customers.

Required to travel to other countries such as Malaysia, Thailand,

Indonesia, India, People's Republic of China or any other territories

that was assigned by the Superior.

. Continuously identify, develop and explore new business opportunities

with all customers to achieve continuous growth.

. Establish new customer base in the Region.

. Continuously source for new products to complement company's existing

range of products.

. Submit daily and weekly report.

FIELD SERVICE ENGINEER

DouYee Enterprises (Philippines) Inc.

March 15, 2007 to July 17, 2011

Job Description

. Set-up of JUKI Machines. This includes the presence and supervision

during the uncrating of Pick & Place machine, leveling, calibration

and setting up the parameters.

. Buy-off. The machine being offered must correspond with the product

specification given by the customer.

. Service. This entails maintenance on the machines, check-ups and

quarterly visits or as specified in the contracts.

. Troubleshooting. This can be done off-site or on-site. First, this

could be done through the telephone for two hours. If nothing

happens within the period, FSE should proceed to the site and

attends to major breakdowns.

. Submit weekly itinerary report.

. Submit weekly and monthly service reports.

. Prepare a report on issues affecting the machines.

. Communicate with principals on machine problems and inquiries.

. Conducts trainings of customer on machine's basic operations,

maintenance and safeties

. Responsible for on-site installation, implementation, maintenance and

repair of GPD Glue Dispenser which may include hardware, software and

networking products as well as operating systems. Installs and

optimizes hardware/software/network products and configurations at

customer sites. Diagnoses and resolves product performance problems.

Performs maintenance and repair services. Ensures customer

satisfaction by advising customers on preventive maintenance and

configurations, which may impact product performance. Proactively

responds to potential equipment issues to prevent unplanned

interruption of customers' business. Delivers (does not design) fully

integrated solutions, which may include peripherals, communications,

operating systems and applications software. Serves as an internal

resource on technical issues. May train other field engineers or

customers. May calibrate equipment on-site for large volume customers.

. Works on on-site customer service and support assignments with broadly

defined objectives

. Works -Solves non-routine issues, challenges and problems within field

of specialization

FIELD SERVICE ENGINEER (SUPERVISOR)

MAXTRONIX, INC.

JUKI GROUP

May 6,1997 to May 26, 2006

JOB DESCRIPTION :

. Set-up of JUKI Machines. This includes the presence and supervision

during the uncrating of Pick & Place machine, leveling, calibration

and setting up the parameters.

. Buy-off. The machine being offered must correspond with the product

specification given by the customer.

. Service. This entails maintenance on the machines, check-ups and

quarterly visits or as specified in the contracts.

. Troubleshooting. This can be done off-site or on-site. First, this

could be done through the telephone for two hours. If nothing

happens within the period, FSE should proceed to the site and

attends to major breakdowns.

. Submit weekly itinerary report.

. Submit weekly and monthly service reports.

. Prepare a report on issues affecting the machines.

. Communicate with principals on machine problems and inquiries.

. Conducts trainings of customer on machine's basic operations,

maintenance and safeties.

SMT STAFF

CASIO PHILS. CORPORATION

June 1996 to April 1997

JOB DESCRIPTION

. Supervise Line Production as well as line technician and machine

operators.

. Initiate machine set-up of all in-line equipment before line

operation.

. Performs equipment programming for new and revised models/devices

used on production.

. Performs programming of CASIO YCM 3300 Full Vision Mounter use for

CASIO products employing special shape of components.

. Performs programming of YCM PV II Vision Screen Printer for in-line

process.

. Ensures machine condition is in top profile before and during

production.

. Initiates material preparation and production schedule before

production.

. Performs pre-operation check before final production.

. Initiates preventive maintenance in all in-line equipment.

. Initiates temperature profiling in all new model for production.

. Initiates corrective actions on machine during major breakdowns.

. Initiates "Customer Satisfaction and Customer Delight" objectives

on SMT section.

. Initiates process documentation on all affected devices as well as

machine specifications, operations and procedures.

SENIOR TECHNICIAN

SURFACE MOUNT TECHNOLOGY SECTION

LINE MAINTENANCE GROUP

TEAM PACIFIC CORPORATION

April 1993 to May 1996

JOB DESCRIPTION

. Performs the buy-off and set-up of all newly arrived equipment.

. Ensure training of production operators as well as sustaining technicians

in basic machine operations, set-up and safeties.

. Conduct trainings for maintenance technicians about troubleshooting,

repair and preventive measures and techniques of all new equipment.

. Performs developmental improvement of all machine covered by Production

Department in terms of shorter production time, ease of operations,

safety and cost savings.

. Ensures support to New Product Development Line ( Prototype Line ) in

terms of equipment needs, equipment set-up, product analysis, etc.

. Performs buy-off of all fixtures, jigs, chucks, stencils and all items

coming from Tooling Group before endorsing to production with the

assistance of Process Eng'g. Group.

. Ensure support to Sustaining Line Maintenance in problem analysis and

equipment major breakdowns and lessen machine downtime.

. Research new equipment and technology which can improve the present

process in the production.

. Performs weekly, monthly and preventive maintenance in front of line

machines such as motor-driven machines and pneumatic driven screen

printers, pick and place machines and air convection and infrared reflow

oven.

. Attends to major breakdowns that needs calibrations, replacement of major

parts and troubleshooting of machines on an hourly basis and assess them

on the desired specifications for their optimum usage.

. Submit reports on all above mentioned cases for proper assessment and

corrective actions.

EDUCATIONAL BACKGROUND :

COLLEGE

BACHELOR OF SCIENCE IN ELECTRICAL ENGINEERING

TECHNOLOGICAL UNIVERSITY OF THE PHILIPPINES

TAGUIG, METRO MANILA

JULY 2006

INSTRUMENTATION AND PROCESS CONTROL TECHNOLOGY

TECHNOLOGICAL UNIVERSITY OF THE PHILIPPINES

TAGUIG, METRO MANILA

APRIL 1991

SECONDARY EDUCATION

LAGUNA COLLEGE HIGH SCHOOL

SAN PABLO CITY, LAGUNA

MARCH 1997

PRIMARY EDUCATION

SAN PABLO CITY CENTRAL SCHOOL

SAN PABLO CITY, LAGUNA

TRAININGS AND SEMINARS

MAINTENACE TRAINING COURSE on JUKI'S MOST ADVANCED ELECTRONIC PRODUCTS

JUKI SMT ASIA CO., LTD (FX-2)

THAILAND

September 27 to October 1, 2010

MAINTENACE TRAINING COURSE on JUKI'S MOST ADVANCED ELECTRONIC PRODUCTS

JUKI SMT ASIA CO., LTD (KE-2060)

THAILAND

January 18 to January 22, 2010

HLC SIMULATION TRAINING COURSE on JUKI'S MOST ADVANCED ELECTRONIC PRODUCTS

JUKI SMT ASIA CO., LTD

THAILAND

April 5 to April 9, 2010

EFFECTIVE SUPERVISORY MANAGEMENT

Conducted by Cole Hopkins

The Heritage Hotel, Pasay City

March 30 to April 1, 2004

CREATIVE SELLING

Conducted by GuthrieJensen

March 8, 2003

FAILURE MODE and EFFECTS ANALYSIS (FMEA)

HAE Consultancy and Training Services

Maxtronix, Inc. office

July 12 & 17, 2002

TEAM ENHANCEMENT WORKSHOP

Conducted by GuthrieJensen

September 28, 2002

Advanced Software programming, process set-up, electrical/Mechanical

Maintenance of GPD Dispenser

Singapore

April 6, 2007

TECHNICAL COURSE ON JUKI'S most advanced electronics products

JUKI Training Center

Kokuryo-Cho Chofu-Shi Tokyo, Japan

August 28, 2000 to September 9, 2000

TECHNICAL COURSE ON JUKI'S most advanced electronics products

JUKI Training Center

Ohtawara, Japan

March 1998 to April 1998

TOTAL PRODUCTION MAINTENANCE SEMINAR

TEAM PACIFIC CORPORATION

FTI, Taguig MM

January 1996

STATISTICAL PROCESS CONTROL SEMINAR

TEAM PACIFIC CORPORATION

FTI, Taguig M.M.

September 1995

STANDARD FIRST-AID TRAINING

PHILIPPINE NATIONAL RED CROSS

October 1995

INTRODUCTION TO PNEUMATICS AND VACUUM APPLICATIONS

INTIGRATED HYDRO-PNEUMATIC SYSTEMS, INC.

September 1994

SURFACE MOUNT TECH. EQUIPMENT TRAINING

TEAM PACIFIC CORPORATION

FTI, Taguig M.M.

April 26 to May 13, 1993

EQUIPMENT HANDLED :

. GPD glue dispenser model MiniMax and MicroMax

. SMT Reflow oven model QP-M, QP-XL, 2.8 pc N2

. JUKI Pick and Place Machine with the ff. Model:

KP-480, KP-560, KP-620, KE-710, KE-720, KE-730, KE-740, KE-750, KE-

760, KE-2010, KE-2020, KE-2030, KE-2050/60/FX1/FX2, KE-3020

. JUKI Dispenser with the ff. Model: KD-770, KD-780, KD-775

. JUKI MATRIX TRAY CHANGER ( ALL MODELS )

. JUKI Reflow model KR-250

. JUKI Printer model KR-310

. MPM Printers (UP2000, AP Excell, AP- HiE, SPM)

. CASIO YCM - PVII FULL VISION SCREEN PRINTER

. CASIO YCM - 3300V HIGH SPEED CHIP MOUNTER

. CASIO YCM - AF AIR CONVECTION REFLOW

. CASIO YCM - QF2 TRAY HOLDER

. CASIO YCM - LD MAGAZINE LOADER

. CASIO YCM - UL MAGAZINE UNLOADER

. DEK SCREEN PRINTER MODEL 248

. DEK SCREEN PRINTER MODEL 249

. YAMAHA SURFACE MOUNTER MODEL 66S MK I & MK II

. YAMAHA SURFACE MOUNTER MODEL 84S MK I & MK II

. YAMAHA SURFACE MOUNTER MODEL 51VM

. YAMAHA SURFACE MOUNTER MODEL YV112

. HELLER AIR CONVECTION REFLOW OVEN

MODELS : HELLER 988C

HELLER 1175S

HELLER 1500S

HELLER 1700S

. VITRONICS IR REFLOW OVEN

PERSONAL DATA :

NICKNAME : JARRY

BIRTHDATE : MAY 23,1970

AGE : 42

BIRTHPLACE : SAN PABLO CITY, LAGUNA, PHILIPPINES

HEIGHT : 5 ft. & 7 in.

WEIGHT : 160 lbs.

CIVIL STATUS : MARRIED

NATIONALITY : FILIPINO

Contact this candidate