Project Manager Mechanical
Resume:
Seyed Aboulfazl Azimfar
Master of Science in Mechanical Engineering
Project Manager in Spent Fuel Division
Mechanical and Nuclear Department
Nuclear Power Production and Development Co.Of IRAN
Seyed Aboulfazl Azimfar
Mechanical and Nuclear Engineering Department
Nuclear Power Production and Development Co.of IRAN
P.O.Box 11365-9313
Tehran, Iran
********@*****.***
*******@*****.***
Eight Floor in Mechanical Engineering Department
- Surname: AZIMFAR
- First Name: SEYED ABOULFAZL
- Date of Birth: Dec 18,1971
- Place of Birth: Sabzevar, IRAN
- Nationality: Iranian
- Father’s Name: SEYED MAHMOUD
- ID Number: 147*******
- Passport Number: H7227810
- Marital Status: Married
- Military Services: Completed
- Home Address:
Flat No.6, No.164, Complex Residential of Shaghayegh
Shahid Chamran Alley, Sardar-e Jangal Blvd.
- Home Tel Number: +982*-********
- Job: Nuclear & Mechanical Engineering Expert.
- Job Address:No.8,Tandis St, Africa Ave, Tehran, IRAN
- PO. Box : 19395/7484
- Contact Number: +982*-********
- E-Mail: ********@*****.***
MSC 1999 Faculty of engineering, University of Research & Development Tehran, Iran
BSC 1995 Faculty of engineering, University of Sistan & Balochestan Zahedan, Iran
Diploma 1990 in Mathematical & physic From High School of Asrar Sabzevar, Iran
- Follow out the Certificates in Mechanical, Nuclear and Civil Engineering Software including:
1. AutoCad
2. Mechanical Desktop
3. ANSYS12
4. Fluent 6.3
5. Matlab
6. Cosmos/M
7. Solid Works
8. Visual Nastran
- Follow out the Certificates in Programming of Languages including:
1. Visual Basic
2. Visual Fortran
3. C++, Visual C
- Expert in Numerical and Finite Elements Methods (FEM)
- Expert in Computational Fluid Dynamics (CFD) in the following fields:
1. Laminar Flow Analysis
2. Turbulent Flow Analysis
3. Compressible & Incompressible Flow Analysis
4. Newtonian or Non-Newtonian Flow Analysis
- Expert in Mechanical Structural in the following fields:
5. Static Structural Analysis
6. Linear Buckling Analysis
7. Transient Structural Analysis
8. Harmonic Response Analysis
9. Modal Analysis
10. Random Vibration Analysis
11. Response Spectrum Analysis
12. Shape Optimization Analysis
9. Fatigue Structural Analysis
- Expert in Thermo Hydraulic in the following fields:
1. Steady-State Thermal Analysis
2. Transient Thermal Analysis
- Expert in the Coupled Multi field of problems such as the following:
1. Structural / Fluid Coupling
2. Thermal / Structure Coupling
3. Thermal / Fluid Coupling
4. Structural / Fluid / Thermal Coupling
- Familiar with Nano-Technology & Composite Materials
- Familiar with following sciences:
1- Hydraulics of dams
2- Design of Diversion dams
3- Hydraulic Structures
4- Numerical of Flow in Various Media
5- Methods of Optimization
6- Topology
• Seddigh,Y. and Azimfar,A "Determination and Calculation of Heat Generation and Distribution in RCC Dam (Jahgin, Dam) with ANSYS6.1 software" in HYDRO2005,17-20 October,2005,Villach, Austria.
• Azimfar,A "Design a Cask for Transportation of Spent Nuclear Fuel Assemblies in VVER-1000 Reactor" in Advanced Nuclear Power Plants (ICAPP '06),4-8 June, 2006, Reno,NV, USA.
• Azimfar,A "Design a Cask for Transportation of Spent Nuclear Fuel Assemblies in VVER-1000 Reactor" In International Seminar of ENS RRFM, 30April – 3 May 2006, Sofia, Bulgaria.
• Azimfar,A "The Calculation and Numerical Analysis of Forces Arising from the Wind on the Body of the RCC Dams" In International Seminar of ICOLD, 18th June 2006, Barcelona, Spain.
• Azimfar,A "The Calculation and Numerical Analysis of Forces Arising from the Wind on the Body of the RCC Dams" In International Seminar of Ground Water Modeling Center, May 2006, Colorado, USA.
• Azimfar,A "Numerical Simulation of Sediment Particles Movement at the Turbulent Channel Flow with software of Fluent 6.0." In International Seminar of USSD) United States Society on Dams (, 1 to 5 May 2006, San Antonio, USA.
• Azimfar,A " Determination of Manning's Roughness Coefficients for Natural Channels and Rivers" In International Seminar of Ground Water Modeling Center, May 2006, Colorado, USA.
• Seddigh,Y. and Azimfar,A "Numerical Modeling of fresh fuel Transportation Package Set (PCS)" In the 1St international conference on Nuclear Power Plants, Environment and Sustainable Development, 30 November – 1 December 2008, Tehran, IRAN.
• Azimfar,A " Modal Analysis of Spent Fuel Cask for WWER-1000 Reactors" in 15th international conference on Nuclear , 4-5 March 2009, Gorgan, IRAN.(Accepted).
• Seddigh,Y. and Azimfar,A "Numerical Modeling of fresh fuel Transportation Package Set (PCS)" In World Congress on Science, Engineering and Technology (WASET)" 25-27 February 2009, PENANG, Malaysia. (Accepted).
• Azimfar,A and Shamsai,A "Design, Calculation and optimization of Emamzadeh Naser Diversion Dam, with Ansys®10.0"
• Azimfar,A " Analysis of water hammer in tubes of Pressurized Nuclear Power Plants"
• Azimfar,A and Emady "Modeling quality of one layer aquifer with focus on decreasing damages of it."
• Azimfar,A "Design & Optimization of surface run off collecting & disposing it with computer module (case study on Babol City)."
• Azimfar,A and Azimfar,M " Calculation and Numerical Analysis of Rubbery Dams arising to forces affect it with ANSYS®10.0 Software"
• Azimfar,A and Amadi.M "Determination of Manning's Roughness Coefficients for Natural Channels and Rivers"
• Azimfar,A and Amadi.M "Design and optimization of Radial gate of dam, with using of Finite Element method, (Case study Karkheh Dam).
• Azimfar,A "The Calculation and Numerical Analysis of Forces Arising from the Wind and wave on the Body of the RCC Dams"
• Seddigh,Y. and Azimfar,A "Determination and Calculation of Heat Generation and Distribution in RCC Dam (Case study Jahgin, Dam)"
• Azimfar,A "Modal analysis of Radial gate with ANSYS®10.0 Software (Case study Karkheh Dam)"
• Azimfar,A " Thermal Analysis of Cooling electronics Facilities (Heat Sink)"
• Azimfar,A "Loading and Handling of fresh fuel of NPPD"
• Azimfar,A "Using and applications of Composite Materials in Power Plants"
• Azimfar,A "Design and Manufacturing of (FCS)System"
• Azimfar.A & Seddigh.Y and Azimfar.M "Determination and Calculation of Heat Generation and Distribution in RCC Dam (Case study Jahgin, Dam)" in the International Journal on Hydropower & Dams.
• Azimfar.A and Seddigh.Y "Vibration Analysis of Fresh Fuel Transportation Cask of WWER-1000 Reactors" in Nuclear Science and Technology journal.
• Azimfar.A "Safety Analysis of Spent Nuclear Fuel Transportation Cask passing through the Fire Tunnel with ANSYS®10.0" in Nuclear Science and Technology journal.
• ISO9000:2000 Certificates including:
1. Planning & Implementation Training Course.
2. Documentation Training Course
3. Essentials Training Course.
4. Statistical Process Control Training Course
5. Internal Audit Training Course.
From QMI CO, Canada on 2002
• Certificate in Calibration and tolerance from Soha Toos CO on 2001
• Certificate in Solid Works Software.
• Certificate in ANSYS Software.
• Certificate in ICDL.
• Certificate in Programming Languages including :
1. Visual Basic
2. Visual Fortran
• Participate in "Advances in Nuclear Power Plants Design" Workshop.
• Participate in " Nuclear Fuel Management with focus on-site Fuel handling"
No. Workplace Position Duration Remarks
1 Nuclear Power production & Development Co.of Iran Group Manager, Fuel Management 6 Year Work in the BNPP operation headquarters
2 Aerospace Organization
(Samen Industries) Expert 4 Year Work in Design, Manufacture, Production and Quality Control
3 Jemco Co.
(Jovain Electric Mashines Industries) Expert 1 Year Work in installations and R&D unit
4 Bahregan Design & Engineering Co. Project manager 1.5 Year Produce industrial and Automobile parts.
5 Shahab Shams Design & Engineering Co. Project manager 1.5 Year Produce industrial and Automobile parts.
6 Training workshop, University of Sistan & Balochestan Project manager 1 Year Work on expert Project
Contact this candidate