Engineer Manager
Resume:
CURRICULUM VITAE
Mr Gwyn Thomas TechWeldI., Eng Tech.
UK Address Home Address Thailand
* ****** ***** **/** Pronthep Garden View 5
Abbeydale Moo 2
Redditch Nongplalai
Worc. 20150
B98 8JW Thailand
Mobile +668******** E-Mail: ***********@*******.*** ******@**********.***
Work Record
2010-2012 Saipem Ltd(Client Agip) Senior Field QC Materials Engineer
2010-2010 FWEL (Client SAMREF) Construction Consultant
2008-2009 FWEL (Client Woodside) Lead QA-QC Engineer
2005-2008 FWEL (Client Sabic) QA-QC /Welding Engineer Deputy QA Mngr.
2004-2005 Alstom Power (Client SEC) QA-QC Inspector
1999-2004 Ledwood Construction Senior QA-QC Inspector Deputy QA Mngr.
2003-2004 Davey Engineering QA Consultant
1999-1999 Shaw Group UK QC Inspection Engineer
1998-1999 UK Construction QA-QC Engineer
1997-1998 Shaw Group UK QA-QC Engineer
1996-1997 CEA Agency QA-QC Engineer
1995-1996 AMEC Process & Energy QC Engineer
1995-1995 Champlain Protex Inspector Supervisor
1993-1994 FH Downs Inspector Supervisor
1993-1993 Senior Thermal Welding Supervisor
1992-1993 Fluor Daniel Welding Supervisor
1990-1992 ABS Construction Welding Supervisor
1988-1989 FH Downs Inspector Supervisor
Key Qualifications and Representative Assignments
Senior Field QC Material Engineer Off shore warehouse and distribution yard
Construction Consultant Refinery turn around
Lead QC/Welding Engineer LNG module & hook up fabrication
QA/QC Welding Engineer Petro-Chemical Saudi Arabia
QC Welding Inspection Engineer Oil Fired Power Stations Saudi Arabia
Senior QA/QC inspector Fabrication shops Deputy QA Manager Head office
QA/QC Engineer Shut down Chevron Texaco Wales, Foster Wheeler Consulting Eng’s
QA/QC Engineer Shut down Elf Refinery Wales
QA/QC Engineer Shut down StatOil Bergen Norway
QA/QC Inspection Eng Low Sulphur Gasoline plant Elf Wales AMEC
QA/QC Engineer Low Sulphur Gasoline plant Chevron Texaco Wales, Foster Wheeler Consulting Eng’s
QC Inspection Engineer CCGT Power Station construction Esso Fawley Shaw Group UK
QC Welding Inspection Engineer CCGT Power Station construction BP Cardiff Black and Veach Consultant Eng
Senior QC inspector Fabrication Salt End CCGT Power Station Raytheon Consultant Eng
Consultant QA for Davey Eng During sub contract at Baglan CCGT for General Electric
Senior QC inspector Fabrication Damhead Creek CCGT Power Station Raytheon Consultant Eng
QA/QC Engineer Fabrication & Installation Foster Wheeler Fired Heater StatOil Bergen Norway
Senior QC Welding inspector Fabrication Fired Heaters Kvearner(France) for Iran
Senior QC Welding inspector Fabrication Fired Heaters Sterling Process for Australia
Senior QC Welding inspector Fabrication LNG Plant Essex Skanska Whessoe
Senior QC inspector Fabrication GRE Pipe work FPSO Bonga Nigeria AMEC
Senior QC Welding inspector Fabrication Off Shore skids BP Clair Project Mustang Eng
Inspector Supervisor Food Factory Up-grade Mars Confectionary Slough
Education and Training
HNC Engineering Technology (Welding & Fabrication)
CSWIP 3.2 Registered Senior Inspector
European Welding Inspection Specialist Diploma
Rad. Interpretation
Certificate for Internal Auditing
IOSH Managing Safely Certificate
KBR/Saipem UK Jv. 29/06/10-14/01/12
Senior Field QC Materials Engineer
Part of initial inventory team reviewing of procedures on behalf of the client AgipKCO with the remit of taking over full control of the material receiving, storage documentation and distribution. Identifying & addressing engineering anomalies. Complete review of all material certification including HP valves, piping and electrical equipment for compliance with the PED & project procedures, correcting past discrepancies. Conducting & supporting safety initiatives taking part in daily & weekly HSE functions. Reintroducing quarantined equipments, into stock, with an inventory report. Controlling and managing Over Short & Damage (OS&D) register. Establishing & managing DCC dept. Managing the upload of all daily produced & historic documentation into DMS(IPMS) and hard copy library, allowing accurate storage and ease of retrieval. Ensuring that delivered materials and equipment are correctly identified and segregated, establishing links with procurement and supplier base to retrieve material certification and Custom Clearance Documents (CCD) controlling the redistribution to the offshore facility ensuring that the correct documentation accompanies the selected materials and equipments.
Foster Wheeler Energy Ltd 01/10-04/10
Construction Consultant
Part of PMC team representing and advising the client, SAMREF, during refinery turnaround in Yanbu Saudi Arabia, specifically main boiler, steam system, sulphur recovery and storage plant. Managing the varied subcontractors ensuring they carry out the planned works within schedule and budget, in line with the HSE requirements, attending HAZID/HAZOP meeting prior to commencing works, conducting daily tool box talks ensure that issued permits are accurate and countersign prior to final approval by operations. Ensuring, that all works comply with, the project quality plan and that inspection hold points are adhered to. Advising the client on and responding to technical engineering issues as they arise. Managing the review and sign off work packs ensuring all works are complete and punch items are cleared prior the turnover to client operations team.
Foster Wheeler Energy Ltd 08/08-12/09
Lead QC Engineer.
As part of EPCM management team during fabrication of modularized, PAR, PAU’s for a LNG plant, Pluto Project, at fabrication yard in Thailand for shipment and installation in Perth Australia. PAU included CCGT unit, Nitrogen Recovery Unit, as well as production units, responsible for management of, sub-contractor quality systems ensuring compliance to client, AUS/NZ, DEP’s(Shell) and international standards ASME B31.3
AWS D 1.1, assisting in closure of engineering TQ. Manage each contractor audits schedule attend their internal audits, conduct EPCM audits on each contractor ensuring material traceability & work packs are recorded and maintained and the project is conducted in line with client and contractor procedures and QP. Identifying and managing quality trends reporting on KPI identified, alleviating potential impacts on schedule and budget. Managing the contractor inspection teams to ensure that the most cost and time efficient processes are utilised. Ensure compliance of NDE packs prior to hydro/pneumatic test. Inspection clearances of modules prior to client walk down and shipment. Review, approve WPS/PQR. PMI & NDT procedures. Review and comment on EPC procedures. Ensure that all inspections are completed to comply with “Flawless” requirements and assist Aquis personnel prior to shipment. Take control and manage the contractor in compilation of MDR, review & present to client for approval and dispatch to site. Control and manage through workshops a team of inspectors and QC engineers, expat + local, ensuring knowledge of project procedures also ensure compliance with HSE requirements.
Foster Wheeler Energy Ltd 11/05-07/08
QA/QC –Welding Engineer /Deputy QA Manager.
Part of EPC management team on Sharq $5billion 3rd Expansion at Jubail Industrial City Saudi Arabia. Taking on the role of QA/QC Manager during leave cycle. Ethylene, Polythene and associated utilities 14 storage tanks, 9% Ni/304SS & 3 Spheres, 72 PAR, Cooling tower, GRE cooling water from 1.8m to 4m Dia. with associated pumps & heat exchangers, 4 fired heaters for new steam system, 42 Km off site pipelines, 5 utility buildings. Working to ASME B31.3/.1, API standards, NFP and various civil engineering specifications. Responsible for the management of the QC groups 23 inspectors all disciplines plus 4 technical support clerks. Control of 12, sub-contractor reviewing QP and quality documents, produce on behalf of sub-contractor, ITP’s and procedures, Agree each contractor audits schedule attend their internal audits. Conduct EPC audits on each contractor ensuring material traceability is recorded and maintained and the project is conducted in line with project and contractor procedures and QP. Review, approve WPS/PQR. PMI & NDT procedures. Control and manage through workshops the contractors team of inspectors of various disciplines from early civil through to mechanical completion. Inspect vendor equipment and fabrications at vendor premises, heat exchangers pumps etc, to ensure completeness and review documentation, prior to delivery and at point of delivery. Witness/Review & acceptance of piping pneumatic/hydro test & packs. Review turnover packages to achieve construction complete and pass on for commissioning. Involved in selection of construction sub-contractors and subsequent prequalification evaluation, bid evaluation. Raise and oversee NCR register, attend/conduct client pre-inspection meetings, co-ordinate RT schedule. Contribute to management of change
Take part in and contribute to HAZID, HAZOP’s and manage the QC group of the subcontractors for two shutdowns to bring new plant online with existing units.
Alstom Power Inc 11/04-07/05
QA/QC Welding Inspector
Overseeing as part of EPC management team construction of three, 350MW oil fired power plants at Shoaiba Saudi Arabia. Identifying trends to ensure potential impacts on schedule are alleviated. Plan and co-ordinate RT schedule, review and sentence Radiographs. Interpretation of client specification and requirements, conduct EPC audits on each contractor ensuring that material traceability is maintained and documented. Control of sub-contractor QC and NDT contractor Overseeing Doc control and NCR register, Reviewing Contractor ITP, and Method statement, Deputising for QA manager during leave cycle, attending meetings with owner.
Ledwood Construction Ltd 04/99-08/04
Senior QA/QC, Engineer/Deputy QA Manager.
Producing Quality Plans & Weld Procedures, standing in for QA Manager, in his absence. Assist in transition to ISO 9001(2000) & registration to PED, recording and documenting the stringent material control requirements of this directive. Ensure all test equipment is calibrated, welder qualifications up-dated & maintained. Responsible for all aspects of QC/QA, testing of welders, witness new weld procedures record and report all parameters, interpretation of drawings, shop floor surveillance, to ensure implementation of quality plans & procedures, execute internal audits. Requesting, assessing & monitoring of, N.D.E. requirements costs & results, control of heat treatment and P.M.I. subcontractors, inspection of paint & insulation contractors work, producing and maintaining QC/QA records using Excel, control of other inspectors as per contract requirement, which has numbered as many as five different contracts running concurrently including fabrication of complete power stations for Saltend Co-Generation which is a five turbine Power Station implementing a wide variety of materials including CMV headers. Damhead Creek a smaller CCGT unit, which used equally complex materials, with inspection requirements to high standards. Ultra Low Sulphur Gasoline plant, at Chevron Texaco. Control of all aspects of QA & QC, including co-ordination of NDE/ PWHT for Total Fina Elf I&T. Fabrication & installation of fired heater in Statoil Refinery Bergen Norway. Fabrication of Off -Shore skids for BP Clair project. Bonga project GRE piping for offshore project in Nigeria, Cat cracker shut down at Mongstat Norway, Reporting to Statoil Engineers. Compiling traceability records and documentation packs for hand over issuing certificate of compliance. Visiting of sub-contractors premises, throughout Europe, to approve release of equipment as required. Attending production, K.O. meetings, HAZID, HAZOP’s with LCL managers, client inspectors & engineers.
Shaw Group U.K. Ltd. 01/99-04/99
QA/QC Engineer,
Involved in all aspects of QC. Requesting & assessing / monitoring of N.D.E. requirements, cost and results for a gas fired co-gen on Esso Fawley Refinery. Ordered and controlled consumables, produced case history of welds documented material register.
. Attended meetings with turnkey contractor QC, client insurance Eng. and safety engineers.
UKC & E – Hopgood Agency 06/98 – 11/98
QA/QC Engineer
Worked on Cussons Soap Factory Conversion, responsible for all aspects of QC. Compiled QA records
using Data-ease, produced as built drawings, reviewed all documents prior to final hand over including daily document control.
Shaw Group UK Ltd 08/97-05/98
QA/QC Engineer
Involved with all aspects of QA/QC. Requesting & assessing / monitoring of; - N.D.E. requirements & results for a CCGT power station
Ordered and controlled consumables, produced case histories of welds attended meetings with Turnkey contractors’ quality controllers, client insurance representatives and safety engineers
Various Agency Contracts 09/96-07/97
QA/QC Engineer
Represented a company during the construction of an experimental unit for extracting heavy metals from power station waste and during the modification of a special buoy system
AMEC Process & Energy Ltd 11/95-07/96
Inspection Engineer
Worked as part of the final inspection team during construction of low sulphur gasoline plant making sure all NDT requirements were met before hand over to client
Responsible for all aspects of QC, interpretation of drawings, shop floor surveillance, to ensure implementation of quality plans & procedures.
Champlain Protex 01/95-10/95
Inspector /Superintendent
Assisted in the dismantling and removal of a chemical plant from Kent to mid Wales.
Responsible for all aspects of QC, interpretation of drawings, shop floor surveillance, to ensure implementation of quality plans & procedures.
Liaised with client engineers and safety engineers regarding the position of the new steam plant and chemical vats incorporating new pipe-work into existing.
F. H. Downes Ltd 11/93-12/94
Inspector/Supervisor
Planned and fabricated platforms and pipe-work for new food production plant. Requesting & assessing / monitoring of - N.D.E. requirements & results.
Senior Thermal 03/93-10/93
Welding Supervisor Various outages at West Burton and Didcot Power Stations.
FLUOR Daniel, Holland ` 07/92-11/92
Welding Supervisor
Supervised and allocated work for 10 welders during shut down of chemical plant Attended safety/co-ordination meetings daily
ABS Construction 03/90-07/91
Welding Supervisor
Responsible for electrode and job allocation, during construction of aircraft hanger at Cardiff airport. Wrote progress reports and liaised with both day and night shift workers Inspected all welds and ensured they were completed to high standards with 100% NDE.
Personal Details
Marital Status Married
Passport: x 2-761****** 761307465
CSWIP No. 7072/2
DOB 20-05-49
Contact this candidate