Resume

Sign in

Plant Power

Location:
Jacksonville, Florida, 32223, United States
Salary:
$65/hour
Posted:
March 11, 2011

Contact this candidate

Harold Garry Kizer

**** ****** **. **.

Jacksonville, Florida 32223

904-***-**** (H); 904-***-**** (C)

vfi4rr@r.postjobfree.com

Employment:

December 2010 to March 2011-- Ventech Engineers Inc., Pasadena, Texas, as Sr. Piping Checker & Designer using AutoCAD, CADWorx Plant Pro, Isogen, Navisworks, and Raster Design to check other Piping Designers’ designs and drawings and to revise piping drawings for plant relocation project.

February to August, 2010 – ProPlant Inc., Houston, Texas, as Sr. Piping Designer using Autocad 2010 and Cadworx 2010 to design and 3D model steam and condensate piping for a fertilizer plant in Mesaieed, Qatar, the Middle East, in ProPlant’s onsite offices.

October, 2008 to April, 2009 – Commonwealth Engineers & Constructors, Houston, Texas, as Sr. Piping Designer using Autocad 2008, Cadworx Plant 2009, Cadworx Equipment, Isogen, and Navisworks to design and model naptha piping for a coker expansion in a refinery in Alabama.

May, 2006 to October, 2008 – Ventech Engineers Inc., Pasadena, Texas, as Sr. Piping Designer using

AutoCAD 2007, CADWorx Plant Pro 2007 & 2008, Isogen, and Navisworks to design a hydrogen separator piping module for a gas-to-liquids unit for a refinery in Trinidad, check other designers' work, designed a crude desalter module for a facility in Peru, worked on a crude unit for a new refinery in Iraq as a Piping Designer and Piping Checker.

September to December, 2005 – CEntry Constructors and Engineers, Sandy, Utah, as Piping Designer using AutoCAD 2006 to design piping for copper mine, petrochemical, etc.

May to August, 2005 -- Millennium Specialty Chemicals, Inc. (formerly Glidco, Inc. and SCM-Glidco

Organics, Inc.), Jacksonville, Florida, as Piping Designer. AutoCAD 2002 piping drawings (steam,

condensate, steam tracing, oils, waste treatment, P&ID’s, orthographics, isometrics) and extensive

field work. Company makes flavor and fragrance oils from turpentine by-product from paper mills.

December, 2004 to May, 2005 – Teledyne Brown Engineering, Huntsville, Alabama. Field Piping Designer at facility in the Pine Bluff Arsenal (Arkansas) that will destroy nerve gas components.

January, 2002 to November, 2004 – City of Jacksonville, Florida, Public Works Division, Engineering Department, Topo Section. Engineering Drafter using AutoCAD 2000 and Land Development Desktop 3 to do topographic and boundary surveys, drainage studies, municipal park projects, etc.

January to December, 2001 -- Pro Quip Corp., Tulsa, Oklahoma (now Linde Process Plants USA), as

Piping Designer. Designing and drawing (manual orthographic and isometric) piping modules (skids)

on projects for Pro-Quip clients.

October, 2000 to January, 2001 – BE&K Construction Co., Birmingham, Alabama. Piping Field

Engineer on site on paper mill expansion and upgrade in Valliant, Oklahoma.

June, 1998 to August, 2000 – Pro Quip Corp., Tulsa, Oklahoma, as Piping Designer. Designing and

drawing (manual orthographic and isometric) piping modules (skids) for projects for Pro- Quip clients.

January to June, 1998 – AccuScreen, Inc., Shawnee, Kansas, collecting specimens for drug screens

and administering blood alcohol breath tests for various companies and organizations in Kansas and

Missouri.

February, 1995 to May, 1997 -- Millennium Specialty Chemicals, Inc. (formerly Glidco, Inc. and SCM-

Glidco Organics, Inc.), Jacksonville, Florida, as Sr. Piping Designer. AutoCAD rel. 13 piping drawings

(steam, condensate, steam tracing, oils, waste treatment, P&ID’s, orthographics, isometrics) and

extensive field work. Company makes flavor and fragrance oils from turpentine by-product from paper

mills.

December, 1990 to June, 1994 -- M.W. Kellogg Engineering Co., Houston, Texas. Sr. Piping

Designer, Piping Checker, Quality Auditor, and Pipe Fab Shop Coordinator. Oil refineries,

chemical plants, pharmaceutical, tobacco processing.

September, 1990 to November, 1990 -- Stone and Webster Engineering Corp., in Houston, Texas, as

Sr. Piping Designer. Refinery in Corpus Christi, Texas; heat recovery for cogeneration.

August to September, 1990 -- Quantum Chemical Co., Deer Park, Texas, as Sr. Piping Designer.

Grassroots ethylene plant; butane, propane, propylene piping revisions, butane pump layout and piping

design.

July to August, 1990 -- ABB Lummus Crest Engineering Co., Houston, Texas as Sr. Piping Checker.

Grassroots ethylene plant near Baghdad, Iraq. Project abruptly cancelled.

August, 1987 to July, 1990 -- Barnard & Burk Engineers, Inc., Baton Rouge, Louisiana. Piping Designer and Piping Checker. Designing and drafting piping for refineries and chemical plants.

June, 1986 to July, 1987 -- Clark & Sons, Inc., Jacksonville, Florida. Survey Draftsman. Drew property

surveys from maps, plats, deeds, surveyor’s notes.

September, 1976 to June, 1986 -- Private business.

February to September, 1976 -- Ethyl Corp., Baton Rouge, Louisiana as Piping Designer. Herbicide

plant in Magnolia, Arkansas.

April, 1975 to February, 1976 -- Bovay Engineers, Inc., Baton Rouge, Louisiana. Piping Designer.

Client: Dow Chemical Co., Plaquemine, Louisiana. Connecting new ethylene unit to existing piping.

April to November, 1974 -- J. Ray McDermott Co., New Orleans, Louisiana. Piping design for offshore

oil well production platforms in the Gulf of Mexico and Nigeria.

February to April, 1975 -- Hooker Chemical Co., Hahnville, Louisiana, as Piping Draftsman. Chlorine

and caustic plant.

November, 1973 to April, 1974 -- Daniel Construction Co., Greenville, South Carolina. Piping

Draftsman in Daniel’s on-site offices at a nuclear plant near Dothan, Alabama.

February to November, 1973 -- J.A. Jones Construction Co. Piping Draftsman in Jones’ on-site offices

at a nuclear power plant near Crystal River, Florida.

April, 1971 to February, 1973 -- Coast Engineering Service, Biloxi, Mississippi. Civil Draftsman.

Property surveys, municipal sewer and drainage projects, mobile home communities, subdivisions.

April, 1970 to April, 1971 -- Drafting school in Gulfport, Mississippi, 40 hours per week.

CAD Training and Experience:

Prime Medusa 2D CAD – 6 mos. drawing P&ID’s for Barnard & Burk, Baton Rouge, Louisiana; 1989.

AutoCAD Rel. 10 -- Six months training (60 classroom hours) at Baton Rouge Vocational-

Technical School, Baton Rouge, Louisiana; 1989-1990.

AutoCAD LT -- One month plus at SCM-Glidco Organics, Jacksonville, Florida; 1995.

AutoCAD Rel. 13/14 – Two years at SCM-Glidco Organics; 1995-1997.

AutoCAD Rel. 13 -- Three day (24 classroom hours) productivity class at CADD

Development,Orlando,Florida; August, 1995.

3D AutoCAD Rel. 13/14 – Ten week course at Tulsa Technology Center, Tulsa, Oklahoma; November

1998 to February 1999.

AutoCAD 2000 and Land Development Desktop – 3 yrs. using the software while working.

CADWorx Plant Pro 2007 -- ECAD/COADE, Houston, Texas, June, 2006.

Cadworx Plant, Cadworx Equipment, Isogen, Navisworks – Have used them all in my work since June,

2006



Contact this candidate