Work-Over, Completion & Well Service Engineer

Saad Shabana Saad Ali

El_Sadwa St., Bilqas city, Dakahlia, Egypt

Email: ****.*******@*****.*** Career Objective:

Personal Information:

:: Nationality Egyptian.

:: Mobile # +201*-***-****.

:: Postal Code 3 5 6 3 1.

Education:

:: Bachelor in Petroleum Engineering" Drilling, Production and Reservoir Engineering",

May 2006.

:: Faculty of Petroleum Engineering & Mining.

:: Suez Canal University.

:: Graduation Project. Directional Drilling well from A to Z in Belayim Land Field.

:: Graduation Project Rate. EXCELLENT.

:: Total Average Rate. VERY GOOD WITH HONORS.

Relevant courses:

1. Drilling Engineering (4 parts).

2. Reservoir Engineering (2 parts).

3. Production Engineering (2 parts).

4. Natural Gas Engineering.

5. Well Logging.

6. Well Test Analysis.

7. Enhanced Oil Recovery.

8. Sedimentary & Paleontological Geology.

9. Structural Geology.

10. Geophysics (gravity, magnetic, seismic)

11. Production Equipment.

12. Electrical Engineering.

13. Mechanical Engineering.

14. Civil Engineering.

15. Transportation & Storage.

16. Automatic control.

17. Microsoft word, Excel, Access, Power Point.

THIS C.V IS INCLUDED IN SIX PAGES.

--------------------------------------------------------------------------------------------------------------------------------------------------------------------------

-------------------------------------------------------------------------------------------------------------------------------

Page 3 of 6

Experience:

:: (4) Three Years of experience:

:: Presently working in Qarun Petroleum Company “QPC” for 4 Years:

A joint venture company between EGPC and Apache Ocean Energy. Working as Well

service Engineer on work-over rigs in all Qarun oil fields

:: Job description:

:: Involved on all well preparation and workover activities, putting and reviewing programs.

:: Work as Company Representative with the responsibility of arrange, follow up, plan and

Execute well completion jobs, well maintenance, rig/ rigless wire line operations and well

Testing operations then report results of well subsurface diagrammatic data to Company

Production Technology General Manger.

:: Responsibilities.

:: Ensure that all operations are carried out incompliance with Company’s HSE procedure.

:: Investigate and report, up to Company requirements, all accidents, incidents and near misses.

:: Execute well service program in safe and cost effective manner.

:: provide support and guidance to service companies personnel.

:: Ensure effective logs, handovers and well records are maintained.

:: Equipment monitoring and ordering.

:: Review and Evaluation of new Technology.

:: Analyze the performance of service companies and evaluate the performance of new tools.

:: Supervise, personally, critical and non-Routine operation.

:: Check and sign the company’s contractor service invoices for completed work.

:: Check and verify access road condition.

:: Overall supervision and preservation of Company’s assets and interests at work locations.

:: Report writing.

:: Job Planning.

:: Conduct regular meeting with the service companies.

:: Supervise all the following operations in a good performance & Safe manner:

CBL-VDL to evaluate quality of cement bond between CSG & formation.

TCP "Tubing Convoyed Perforating" under two environmental conditions:

§ Overbalance perforation.

§ Under balance perforation.

Wire line Convoyed Perforating.

Through tubing perforation by electric line.

Running Frac strings with various types of down-hole tools.

Reservoir fracturing operations (High pressure large volume hydraulic fracture treatment,

R/U surface lines, trailer manifold, Frac high pressure pumps, monitoring unit, data

acquisition sensors, backside pump and blender).

Reservoir stimulation using hydraulic fracture, familiar with service companies software

§ First: Schlumberger which uses "FracCADE*" software.

§ Second: Halliburton which uses "FracProPT" software.

Reservoir stimulation using new technologies, exp: "Clear Frac." with Schlumberger.

THIS C.V IS INCLUDED IN SIX PAGES.

--------------------------------------------------------------------------------------------------------------------------------------------------------------------------

-------------------------------------------------------------------------------------------------------------------------------

Page 4 of 6

Reservoir stimulation using “Limited Entry Fracture Treatment” with SLB & Halliburton.

Reservoir stimulation using new technologies, exp: "CW Frac." With Halliburton.

Reservoir stimulation using new technologies, exp: "Settle Frac." With Halliburton.

Reservoir stimulation using Acidizing treatment by coiled tubing.

Complete Data Frac analysis with Schlumberger & Halliburton.

Technical Advisor in some Frac jobs.

Production well testing by using coiled tube and test package.

Post Frac. Clean out by using coiled tubing and flow back equipment.

Setting bridge plugs by wire line & mechanical.

Spotting Sand Plug Using Coiled Tubing.

Spotting Sand Plug Using Pull Heading method.

Drilling out proppant & Bridge plugs.

Running production well completion with ESP & Sucker Rod Pump.

Running Injection well completion with straddle Packer.

MDT & XPT jobs.

Fishing of MDT by using overshot "over stripping".

ü All Papers are Available and Certified.

ü This C.V. is 100% and accurately describing my on hand career without any excess or dummy

experience.

ü Safety is an integral Part of my business.

Personal Activities:

:: Self-study of the following References:

v Economides, M.J., and Nolte, K.G.: Reservoir Stimulation, Schlumberger Educational

Services, 1st Edition 1987, 2nd Edition, 1994, 3rd Edition, 1998.

v Economides, M.J., and Martin, T.: Modern Fracturing Enhancing Natural Gas

Production, OK, Energy Tribune Publishing Inc. 2007 Houston, TX 77040.

v Schechter, R..: Reservoir StimulationÓ 1992 by prentice-Hall, Inc. Asimon & Schutcher

Company, Englewood Cliffs, New Jersey 07632

:: Well simulation & Hydraulic fracturing Technology instructor in lager training center in Egypt.

:: Complete Data Frac analysis:

v Step Rate Test

With some own modifications

v Flow Back Test

v Step Down Test

Methods of calculations in case of the availability of:

§ Surface pressure

§ Calculated BHP

v Calibration injection test.

v Analysis during pumping (Net Pressure Interpretation “Nolte - Smith plot”).

v Diagnostics for non ideal fracture propagation.

v Formation pressure capacity and its complicating mechanisms.

T – Shaped fracture.

Fissures opening.

Height growth through pinch point.

v Approaches to overcome Formation pressure capacity complicating mechanisms

THIS C.V IS INCLUDED IN SIX PAGES.

--------------------------------------------------------------------------------------------------------------------------------------------------------------------------

-------------------------------------------------------------------------------------------------------------------------------

Page 5 of 6

v Generalized Decline curve analysis; how to plot and interpret (Explain) the following

approaches:

G function approach.

Square Root shut in time approach.

Square Root shut in time plus pumping time approach.

Log – log plot approach.

Horner plot approach.

Cartesian plot approach.

How to Calculate :

§ Fluid loss coefficient

§ Fluid Efficiency

§ Fracture dimensions

How to Calibrate stresses data.

Identification of non ideal behaviors during shut in.

v New method to determine Closure pressure from calibration pumping period.

v Comparing between different techniques simultaneously. Own software calculations.

:: Main Fracturing Treatment Design:

v Treatment optimization design procedures.

v Design process.

v Design considerations.

v Fracture design criteria.

v The scientific base for Proppant Concentration Schedule

:: Hydraulic Fracturing Simulator:

v FracCade

v FracPro PT2007

:: Limited Entry Fracture treatment.

:: Perforating for Limited Entry Fracture treatment:

v Determination of number of perorations required for each zone

v Number of perforations accepting fluids.

:: Simulate ("FracCade SLB Software", "FracProPT Pinnacle Technologies" & "In-site for

Stimulation Halliburton Software" by programming Excel and obtain the same results by different

Approaches. Not only that but also comparing between them.

:: Comparing between Schlumberger and Halliburton in Data Frac analysis by my own calculations

and have similar results for some of our wells.

:: Merge Schlumberger & Halliburton Techniques for data Frac analysis in single software to

compare between results obtained simultaneously.

:: Saad Shabana: "Drilling Problems and Their Remedy, the Theory & Techniques for Solutions"

Presentation organized by Faculty of Petroleum Engineering in presence of SPE Egyptian Section.

:: Saad Shabana: "Water Control" presentation organized by faculty of Petroleum Engineering and

Mining in Suez.

:: Attendance of the 2nd Middle East And North Africa Sucker Rod Beam Pumping, Operation,

Troubleshooting And Failure Analysis, Training Symposium And Open Forum, April3-6, 2006

organized by LUFKIN-Company.

THIS C.V IS INCLUDED IN SIX PAGES.

--------------------------------------------------------------------------------------------------------------------------------------------------------------------------

-------------------------------------------------------------------------------------------------------------------------------

Page 6 of 6

Personal Language Skills:

:: Arabic Native Language.

:: English Very Good Speaking, Listening and Excellent Writing.

Personal Computer Skills:

:: Microsoft Windows (98, Millennium, XP, and 2000 server, Vista).

:: MS Word.

:: MS Excel.

:: MS Access.

:: MS Power point.

:: Internet & some DOS.

Other Personal Skills:

:: Ability and willingness to self-study any given material.

:: Ability to work successfully both in groups and independently regardless of the surrounding

environment and external pressure.

Training:

:: Summer field training in QANTARA PETROLEUM COMPANY from 15-30/07/2005, in the

following items:-

1. Safety.

2. Production processes in south Battra gathering station.

3. Some rig operations on "ECDC-2, PD-104" (Drilling & Casing Cementing).

4. Well maintenance.

:: Summer field training in PETROBEL COMPANY from18/06/2005 to 2/07/2005, in Nile Delta

field in the following items:-

1. Safety.

2. Well maintenance.

3. Natural Gas Engineering Processes.

4. Work over job on rig "EDC-2" (P &A).

Hobbies & Interests:

:: Learning Computer (Application Programs & Programming Languages).

:: knowledge research.

:: Travel.

References:

:: Eng. / Ali Mira,

Egyptian General Petroleum Organization Vice-President.

Egyptian General Petroleum Organization.

Cellular # +20-10-131*-***.

Contact this candidate