Senior Electrical Engineer

Carlos M. Noriega S.

B.S. Electrical Engineering

Address: Rozenstraat 45, 2011 LT Haarlem, The Netherlands

Phones: +31-65-495****

************@*****.***, ************@*****.***

SUMMARY:

BSEE with wide experience, about 31 years, in the development of conceptual, basic and detailed electrical engineering for the Onshore Oil & Gas Industry, including installations in medium and low voltage in petroleum refineries, oil pumping and interconnection stations, flow stations, multiples and injection wells for gas transmission systems. Design of power and control systems, substations, switchgears, motor control centers, bus ducts, electric motors installation, lighting, raceways for distribution circuits, grounding and over voltage protection, lighting protection, standby power systems, device protective coordination, cathodic protection for pipes and tanks, high voltage overhead transmission lines in 115 kV, 230 kV, 400 kV and 800 kV, overhead distribution lines in 13,8 kV, 34,5 kV and 69 kV, QCQA for Electrical and Instrumentation installations, construction support and coordination.

EDUCATION:

Universidad Simón Bolívar, 1980, Caracas, Venezuela

Highest class point average

EXPERIENCE:

Fluor B.V., Haarlem, The Netherlands, SENIOR DESIGN ENGINEER LEADER, from Aug/2011 to Nov/2011: FEED Contract for MoVe-2 Project for Momentive Specialty Chemicals, Pernis Refinery, The Netherlands. Responsible for the design of electrical installations associated with 400 V MCC, electric motors, lighting, raceways for power distribution and control circuits, grounding, lightning protection and electrical equipment technical specifications.

Fluor B.V., Haarlem, The Netherlands, SENIOR DESIGN ENGINEER LEADER, from Aug/2011 to Oct/2011: FEED Contract for the SPACE Project in Momentive, Pernis, The Netherlands and Momentive, Norco, Louisiana, USA. Electrical Engineer responsible for the design of electrical installations associated with MV and LV Switchgears, electric motors, lighting, raceways for power distribution and control circuits, grounding and lightning protection.

Fluor B.V., Haarlem, The Netherlands, SENIOR DESIGN ENGINEER LEADER, from Aug/2011 to Sep/2011: FEED Contract for Seawater Cooling Tower SCT Project for Equate Petrochemical Co., Olefins 2, Kuwait. Electrical Engineer responsible for the selection of 11 kV switchgear, 415 V distribution board for auxiliary power, rerouting and reconnection of the motor power cables and 11 kV feeder from the new power source.

Fluor B.V., Haarlem, The Netherlands, SENIOR DESIGN ENGINEER LEADER, from March/2011 to Aug/2011: EPC Contract for SAPCO, Super Absorbent Project in Al Jubail, Saudi Arabia. Electrical Engineer responsible for the one line diagrams, interconnecting diagrams, equipment specifications and technical bid evaluations.

Y&V INGENIERÍA Y CONSTRUCCIÓN, Caracas, Venezuela, Consortium Toyo Engineering Corporation (TEC), Foster Wheeler Italiana (FWI) and Y&V Ingeniería y Construcción), ELECTRICAL ENGINEER LEADER, from Feb/2010 to January/2011: FEED Contract for El Palito Refinery Expansion Project (RELP) for PDVSA in Refinería El Palito, Venezuela. Responsible for the Utility Units and one line diagrams associated with 115/34,5/13,8/4,16/0,480 kV substations.

Y&V INGENIERÍA Y CONSTRUCCIÓN, Caracas, Venezuela, Consortium Toyo Engineering Corporation (TEC), Foster Wheeler Italiana (FWI) and Y&V Ingeniería y Construcción), ELECTRICAL ENGINEER LEADER, from April/2009 to Dic/2009: Basic and detailed engineering for the electrical installations of Social Club and Administrative Complex for El Palito Refinery Expansion Project (RELP) for PDVSA in Refinería El Palito, Venezuela.

Y&V INGENIERÍA Y CONSTRUCCIÓN, Caracas, Venezuela, ELECTRICAL ENGINEER LEADER, from Nov/2008 to March/2009: Elaboration of the offer for the Venezuela Methanol Plant 5000 MPTD, EPC Project, responsible for the issue of electrical equipment specifications, data sheets, requisitions, bill of material, bill of quantities and man-hours estimate for basic and detailed engineering.

Y&V INGENIERÍA Y CONSTRUCCIÓN, Caracas, Venezuela, TECHNICAL ADVISOR ELECTRICAL ENGINEERING, from July/2008 to Oct/2008: Deputation at Tecnimont S.p.A. in Milan, Italy for the execution of FEED stage for the PP-PDH Plant Project, Jose Industrial Complex in Venezuela, owned by Propilsur, S.A. (Join Venture Pequiven-Braskem), responsible for the review of the major electrical deliverables, in order to comply with the Venezuelan Norms and Standards.

Y&V INGENIERÍA Y CONSTRUCCIÓN, Caracas, Venezuela, ELECTRICAL DEPARTMENT MANAGER (In Charge), from Feb/2008 to July/2008: Responsible for the electrical department issues.

Y&V INGENIERÍA Y CONSTRUCCIÓN, Caracas, Venezuela, ELECTRICAL ENGINEER LEADER, from Sep/2007 to Jan/2008: FEED Contract for Sulfuric Acid Plant for Pequiven in Moron, Venezuela. Electrical Engineer responsible for the issue of electrical equipment specifications, data sheets, requisitions, bill of material and bill of quantities.

Kellogg, Brown & Root, KBR, Houston, TX, USA, ELECTRICAL ENGINEER LEADER, Oct/2006 to Jul/2007: FEED Contract for Yanbu Export Refinery Project for Saudi Aramco – Conoco Phillips in Saudi Arabia. Electrical Engineer responsible for the one line diagrams associated with 380/34,5/13,8/4,16/0,480 kV substations and cathodic protection specifications.

PROYECTA, CORP, S.A. (Consulting Firm) CORPORATE TECHNICAL REVISER, April/2005 to Aug/2006: Responsible for the electrical documents checking issued in the Proyecta s Regional Offices for PDVSA’s Oil and Gas installations projects.

PETROZUATA, C.A. (Conoco-Phillips-PDVSA), ELECTRICAL ENGINEER LEADER, July/09/2003 to December/03/2004: Responsible for the electrical activities in the detailed engineering and construction for “RESTORATION PROJECT” for the UPGRADER PLANT in Jose, Edo. Anzoátegui, Venezuela. The scope of electrical design include: all electrical systems associated with 4,16/0,480 kV switchgears, 4,16/0,480 kV motor control centers, device protective coordination, bus ducts, 4,16/0,480 kV electric motors, lighting, raceways for power distribution and control circuits, grounding, over voltage protection, lightning protection, standby power systems, cathodic protection, fire protection system, the elaboration of electrical equipment technical specifications including requisitions and procurement support in Outside Battery Limits (OSBL) units.

PROYECTA CORP, S.A. (Consulting Firm), ELECTRICAL AREA COORDINATOR, September/01/1994 to February/28/2003: Responsible for the electrical activities in the projects and bids elaboration, supervision of engineers, designers, CAD operators and supporting personnel besides I have participated in the following projects, sharing with my Electrical Area Coordinator duties:

From Jan/2002 to Dec/2002

PROYECTA CORP, S.A., Electrical Leader in basic and detailed engineering for the electrical installations in sectioning valve stations and cathodic protection of Moron-Coro 30” Gas pipe for the Gas Transport System Interconnection “Centro-Oriente/Occidente”, “ICO Project”, for PDVSA-GAS. The scope of electrical design include: overhead distribution lines (13,8 kV), incoming power service (240 VAC), duct banks, internal and exterior lighting and receptacles, standby system, grounding, lightning protection, cathodic protection for the 30” buried gas pipe and the elaboration of electrical equipment technical specifications including requisitions and procurement support.

From Jun/2002 to Aug/2002

PROYECTA CORP, S.A., Electrical Leader in detailed engineering for electrical installations in flow stations, multiples and injection wells for the Control and Measurement Systems Optimization of San Tome Distribution Gas System, “UEPE Stage II” Project for PDVSA. The scope of electrical design include: overhead distribution lines (13,8 kV), incoming power service (240 VAC), duct banks, internal and exterior lighting and receptacles, standby system, grounding, lightning protection and the elaboration of electrical equipment technical specifications including requisitions and procurement support.

From Feb/2001 to Dec/2001

CONTRINA Consortium (KBR, PARSONS, TECHNIP, PROYECTA and DIT-HARRIS), EPC Contract for SINCOR downstream project (construction stage).

Electrical and Instrumentation Construction Superintendent and Quality Control Supervisor (QA/QC) in the installation of: 115/34,5/6,6/0,460 kV substations, 34,5/6,6/0,460 kV switchgears, 6,6/0,460 kV motor control centers, bus ducts, 6,6/0,460 kV electric motors, lighting, raceways for power distribution, control circuits and instruments, grounding, over voltage protection, lighting protection, standby power systems, cathodic protection, electric heat tracing, fire protection system, instruments, flex I/O, PLC and DCS.

From Nov/2000 to Jan/2001

PROYECTA CORP, S.A., Electrical Leader in detailed engineering in Gas Dehydration Plant Orocual 2 (PD-ORC-2) for PDVSA for the installation of all electrical systems associated with overhead distribution lines (13,8 kV), incoming power service (240 VAC), duct banks, internal and exterior lighting and receptacles, standby system, grounding, lightning protection, fire protection system and the elaboration of electrical equipment technical specifications including requisitions and procurement support.

From Jun/2000 to Oct/2000

CONTRINA Consortium (KBR, PARSONS, TECHNIP, PROYECTA and DIT-HARRIS), EPC Contract for Venezuelan Extra Heavy Oil Project (VEHOP downstream) for PETROZUATA (construction stage). Quality Control Supervisor (QA/QC) in the installation of: 115/34,5/4,16/0,480 kV substations, 34,5/4,16/0,480 kV switchgears, 4,16/0,480 kV motor control centers, bus ducts, 4,16/0,480 kV electric motors, lighting, raceways for power distribution, control circuits and instrument, grounding, over voltage protection, lightning protection, standby power systems, cathodic protection and fire protection system.

From Jan/2000 to Jun/2000

PROYECTA CORP, S.A., Electrical Area Coordinator. Elaboration of bids, supervision of engineers, designers, CAD operators and supporting personnel.

From May/1999 to Dec/1999

CONTRINA Consortium (KBR, PARSONS, TECHNIP, PROYECTA and DIT-HARRIS), EPC Contract for SINCOR downstream project (detailed engineering stage).

Electrical Area Lead. Detailed engineering for the design of all electrical systems associated with 115/34,5/6,6/0,460 kV substations, 34,5/6,6/0,460 kV switchgears, 6,6/0,460 kV motor control centers, device protective coordination, bus ducts, 6,6/0,460 kV electric motors, lighting, raceways for power distribution and control circuits, grounding, over voltage protection, lightning protection, standby power systems, cathodic protection, electric heat tracing and fire protection system in Utilities and Outside Battery Limits (OSBL) units.

From Nov/1997 to May/1999

CONTRINA Consortium (KBR, PARSONS, TECHNIP, PROYECTA and DIT-HARRIS), EPC Contract for Venezuelan Extra Heavy Oil Project (VEHOP downstream) for PETROZUATA (detailed engineering stage). Electrical Area Lead. Detailed engineering for the design of all electrical systems associated with 115/34,5/4,16/0,480 kV substations, 4,16/0,480 kV switchgears, 4,16/0,480 kV motor control centers, device protective coordination, bus ducts, 4,16/0,480 kV electric motors, lighting, raceways for power distribution and control circuits, grounding, over voltage protection, lightning protection, standby power systems, cathodic protection, fire protection and control systems in Outside Battery Limits (OSBL) units.

From 1994 to 1997

PROYECTA CORP, S.A, Electrical Area Coordinator. Elaboration of bids, supervision of engineers, designers, CAD operators and supporting personnel in the development of the following conceptual, basic and detailed engineering projects:

• Conceptual Engineering for South Storage Tank Area of Jose Industrial Condominium for CORPOVEN, S.A.

• Basic and Detail engineering for the electrical installations for the design of Interconnection Stations; Measurement and Regulation of the GNV system for Caracas Metropolitan Area, for CORPOVEN, S.A.

• Urbanism regulation Study of Jose Industrial Condominium for CORPOVEN, S.A.

• Engineering Updating of Cardon Industrial Park, MARAVEN, S.A. (Cardon Refinery).

• TAP-PARC Interconnection Project, MARAVEN, S.A. (Cardon Refinery).

• Process Water Treatment (TAP) Project, MARAVEN, S.A. (Cardon Refinery).

• Expansion of Crude Handling Capacity in P.T.T., ERB-I and ERB-II and Oil Pipeline, CORPOVEN, S.A.

• SWS2 Industrial Services, MARAVEN, S.A. (Cardon Refinery).

• Process Water Treatment and Segregation “SYTAP” Project, Maraven, S.A. (Cardon Refinery).

The scope of electrical design include: power systems, substations, switchgears, motor control centers, device protective coordination, bus ducts, electric motors installation, lighting, raceways for distribution and control circuits, grounding and over voltage protection, lighting protection, standby power systems, cathodic protection for pipes and tanks, overhead distribution lines in 13,8 kV, 34,5 kV and 69 kV and the elaboration of electrical equipment technical specifications including requisitions and procurement support.

GPI, GRUPO DE PROYECTOS, C.A. (Consulting Firm), 1992 to 1994: Electrical Leader in detailed engineering for the design of all electrical systems associated with grounding, lighting, power and control systems in stations and line design for Underground Transportation System “METRO DE CARACAS”.

MARSHALL Y ASOCIADOS, C.A. (Consulting Firm), 1990 to 1992: Electrical Leader responsible for the electrical activities in the development of the following conceptual, basic and detailed engineering projects for the Oil and Gas Industry:

• Development of Boqueron Field, LAGOVEN, S.A.

• ACOGAS Project, LAGOVEN, S.A.

• Adecuation of Pear III and IV, Cardon Refinery, MARAVEN, S.A.

The scope of electrical design include: power systems, substations, switchgears, motor control centers, device protective coordination, bus ducts, electric motors installation, lighting, raceways for distribution and control circuits, grounding and over voltage protection, lighting protection, standby power systems, cathodic protection for pipes and tanks, overhead distribution lines in 13,8 kV and the elaboration of electrical equipment technical specifications including requisitions and procurement support.

IDESE, C.A. (Consulting Firm), 1984 to 1990: Electrical leader and designer in basic and detail engineering projects of high voltage overhead transmission lines in 115 kV, 230 kV, 400 kV and 800 kV, overhead distribution lines in 13,8 kV, 34,5 kV and 69 kV, inspection of substations and overhead transmission lines in 115 kV, 230 kV, reliability studies in power systems in petrochemical complex and feasibility studies for power systems.

SERINEL, S.C. (Consulting Firm), 1980 to 1984: Electrical leader and designer in basic and detail engineering projects of high voltage overhead transmission lines in 115 kV, 230 kV, 400 kV and 800 kV and inspection of substations.

LANGUAGES

English and Spanish (native).

SKILLS

• Windows 2007, MS Word 2007, MS Excel 2007.

• ETAP PowerStation 5.5.6.

• CARDS +, cable and raceway design system.

• AGI, VISUAL, LUXICOM (Crouse-Hinds) for Illumination levels calculus.

• Super DB for consumer and cable list elaboration.

SEMINARS

• IEEE 1584 Arc Flash Equipment Design ANSI & IEC, 17-18 – April – 2007, IEEE Houston Section, 8 hours.

• Motor Starting: Equivalent Circuits, Starter Types and Dynamics, 3-4 – April – 2007, IEEE Houston Section, 8 hours.

• IEC Circuit Breakers, 20-21 – March – 2007, IEEE Houston Section, 8 hours.

• PMCS Considerations for Industrial Applications, 20-21 – February – 2007, IEEE Houston Section, 8 hours.

• ETAP, Electrical Transients Analyzer Program, March – 2000, PROYECTA CORP, C.A., 80 hours.

Contact this candidate