Hello,my name is Bradley Posey.I have extensive mine experience.Thank you for considering my application for employment with your company.

BRADLEY J. POSEY

Profile

I am a self-motivated, enthusiastic Electrician who is a team player able to liaise with people at all levels. I have 10 years of total experience, and it is my goal to become a Master Electrician.

Employment History

Mar2009-present Pennsylvania UC

Sep2008 – Nov2008 GULF COAST STAFFING Owensboro Ky

Electrician Ph: 941-***-****

Installed O-Cal conduit, flex, wiring for Field Instruments, terminated Digital Scales, Limit Switches, I/O Panels, High-Level, Low-Level Switches iaw Systems Blueprints for UNILEVER / RAGU kitchen equipment. Also installed EMT Conduit, J-Boxes, EXPLOSION-PROOF Lights, pulled no.12 wire, terminated lights. Assisted another Journeyman at Kimberley/Clark Paper Mill setting a piece of Switchgear, installed two 2” nipples, anchors. Job Superintendant Tom Fuller

Jul2008 – Jul2008 GULF COAST STAFFING Owensboro Ky

Electrician Ph: 941-***-****

Installed cable receptacles for temp. power, terminated cables to generator load side, terminated cables to assoc. buckets inside switchgear, installed limit switches during shutdown, removed and replaced 10HP motor, removed flex and conduit during shutdown.

Jun2008 – Jul2008 TECH TRADES Dalton Ga

Electrician Ph: 800-***-**** x217

Ran 2” IMC, installed strut, photo eyes for conveyor, ran and 1” IMC.

Jan2008 – Mar 2008 ZACHARY Cottonwood Az

Electrician Ph: 928-***-****

Set Switchgear and Transformers inside MCC room, Terminated Switchgear and Lighting/Receptacle Transformers, Installed Receptacles, Junction Boxes, Lighting switches, Installed Grounding for Switchgear, ran ” up to 4” conduit.

Sep2007- Jan2008 WESTERN INDUSTRIAL Morenci,Az

Electrician Ph: 928-***-****

Terminated 30 and 50 HP motors, Switchgear, built Stress Cones, Pulled 5kv cable, 500, 750, Ran cable tray, ran 4” O-CAL conduit, ran ” conduit for Exterior Lighting, ran 1” rigid conduit, Removed and Installed Ballasts, Coil, Transformers in 480v Metal Halide Lighting Systems. Changed Ballasts; tombstones and bulbs for Fluorescent Lighting Systems at Phelps Dodge Copper Mine at Morenci Az. Competed the job on schedule. Electrical was the only shop to make a profit. We covered Pipe Dept., and then transferred to Phelps-Dodge Mine at Tucson, Az where we were building another Pump-Booster Station just like the previous one at Morenci. Stayed there 2 wks, left due to lack of materials. Electrical Superintendant Mike Goodwin cell 520-***-****)

Jun 2007 – Sep 2007 AKER KVAERNER Safford, Az

Electrician Ph: 505-***-****

Installed and Terminated Stop/Start switches and pulled wire for Crane Bus rail, Installed bus rail, ran 24” cable tray, Terminated Switch gear and Fan motors, ran rigid conduit in Phelps Dodge Copper Mine at Safford Az.Left job due to unsafe conditions. Example: They tried to make me stab no. 4 cables into Switchgear with a live Bus-Bar. Elec. Super. Was hit by 4160vac. That told me it was time to go.

Apr 2007 – May 2007 AMPS Memphis, Tn

Electrician Ph: Not available

Installed EMT conduit for conveyers, pulled wire and terminated 125v. motors. Installed channel ducting at Book Factory in Chicago Il.

Oct 2006 – Feb 2007 TRADES UNLIMITED Nashville, Tn

Electrician Ph: 615-***-****

Installed cable racks, ran EMT, set boxes for switches, receptacles, data, Installed disconnects and breaker panels and ran MC cable for a 5 story BIO-MED Lab in Huntsville Al.

May 2006 – Oct 2006 ENTERPRISE ELECTRIC Nashville, Tn

Electrician Ph: 615-***-****

Installed cable tray, 2” IMC, ” IMC, 1” IMC, 3” IMC, and associated seal tight flex. Installed 100 amp disconnect boxes. Pulled low voltage wire at Nissan of Deckerd TN.

Apr 2006 – May 2006 SW&B Const. Sunray, Tx

Electrician Ph: 888-***-****

Installed 12” cable tray, 4” IMC, 1” IMC, ” IMC, disconnect boxes at Valero McKee Refinery.

Feb 2006 – Mar 2006 SW&B Const. Georgetown, SC Electrician Ph: 888-***-****

Installed fiber optic cable, ran rigid IMC conduit. Pulled 750 MCM.

Sep 2005 – Jan 2006 Edwards Electric Deckerd, TN

Electrician Ph: 931-***-****

Addition to the Nissan Plant at Deckerd: Ran cable tray, ran conduit, ran reloc, ran 1600 amp buss duct, pulled 750 MCM wire, 500 MCM wire, assisted in termination of primary and secondary transformers, cadwelded grounds, installed 277 volt lights, and installed emergency lights. Also, ran EMT, set boxes for an office.

Mar 2004 – Sept 2005 Beauliea of America Bridgeport, AL

STM Operator Ph: 256-***-****

Ran STM Machines for 12 hours per day.

Sep 2003 – Feb 2004 Norris & Sons Chattanooga, TN

Refractory Laborer

Mixed mud and tore out old mud and insulation inside boilers at paper mills.

Oct 2003 – Nov 2003 Kamtech Atlanta, GA

Electrician Ph: 334-***-****

Lighting and heat trace at Bowater in Rock Hill, SC Plant.

Jul 2003 – Sep 2003 Freddie Jenkins Stevenson, AL

Contractor Ph: 256-***-****

Electrician, hung sheet rock, and helped to build 4-car garage with paint booth.

Mar 2001 – Jun 2001 DP Electric Company Ringgold, GA

Electrician Ph: 706-***-****

Residential Wiring and Commercial Lighting.

Sep 2002 – Jul 2003 Beauliea of America Bridgeport, AL

STM Operator Ph: 256-***-****

Ran STM Machines for 12 hours per day.

Mar 2002 – Aug 2002 Rock Tenn Kimball, TN

General Laborer Ph: 423-***-****

Worked in Finishing Department, air hammered boxes, and fed boxes into a gluer.

Jul 2001 – Oct 2001 Hamilton Pattern Bryant, AL

General Laborer and CNC Operator

Operated a CNC Machine which milled car parts.

Mar 2001 – Jun 2001 DP Electric Company Ringgold, GA

Electrician Ph: 706-***-****

Residential Wiring and Commercial Lighting.

Nov 2000 – Mar 2001 DC Pruett Contracting, Inc @Mead in Stevenson, AL

Electrician Ph: 256-***-****

Pulled wire, installed conduit, cable tray, demo, boiler room, installed cameras @ paper roller.

Aug 2000 – Oct 2000 SW & B Construction Corp Rustburg, VA Electrician Ph: 804-***-****

Demo, conduit, electrical wire, installed conduit and cable tray, assisted another journeyman in the installation of 10,000 amp disconnect service.

Jun 1999 – May 2000 Freddie Jenkins Stevenson, AL

Contractor Electrician Ph: 256-***-****

Built house in Stevenson, AL, and assisted in carpentry, electrical work, and vinyl siding.

May 1998 – Jun 1999 Kamtech Atlanta, GA Electrician Ph: 334-***-****

Pulled wire.

Nov 1997 – Mar 1998 BE & K Construction USG, Bridgeport, AL Electrician

Pulled wire, termination.

May 1997 – Sep 1997 Grant – Neil Electric Chattanooga, TN Electrician Ph: 423-***-****

Residential Wiring.

Oct 1996 – May 1997 BE & K Construction, Inc Mead Containerboard in Stevenson, AL Electrician Ph: 205-***-****

Construction Electrician.

Education & Military Experience

High School: Graduated at North Jackson High School May 1992

From To

06/92 06/96 US Navy, Served on the USS Mt Vernon (LSD – 39) as Maintenance Electrican

• Certified Electrician Mate officer of Watch

• Certified Emergency Diesel Generator Switchboard Electrician

• Certified Aftersteering Electrician

• Certified Anchor Windlass Electrician

• Certified Motor Generator Electrician

• Certified Flying Squad Electrician

09/92 04/93 Attended Electrician’s Mate ‘A’ School at Great Lakes, IL

Interests and Extracurricular Activities

• Hiking

• Mountain

• Climbing

• Fishing

• Swimming

Refrences________________________________________________________________________

Mike Kaska - Electrical Foreman Ph: 406-***-****

Billie Sigmon _ Safety Foreman Ph: 704-***-****

Prince Barbee - Insurance Salesman Ph: 256-***-****

Personal Details for BRADLEY J. POSEY

Mike Kaska - Electrical Foreman Ph: 406-***-****

Billie Sigmon _ Safety Foreman Ph: 704-***-****

Prince Barbee - Insurance Salesman Ph: 256-***-****

Personal Details for BRADLEY J. POSEY

Contact this candidate