Engineer Mechanical

Masood Noor M.Eng., P.Eng., LEED AP

**** ***** ********, ***. ****, Mississauga, ON L5A 3X1

Mobile 416-***-**** E-mail: **************@*******.***

OBJECTIVE

To join a progressive Consulting Engineering firm as a Project or Mechanical Engineer, where the opportunity exists to achieve technical excellence through determined effort and leadership.

EMPLOYMENT

Smith + Andersen Toronto June 2009 - October 2010

Senior Mechanical Engineer

DUTIES & RESPONSIBILITIES:

• Participate in design coordination meetings

• Perform heating/cooling load calculations & air balancing

• Prepare concept reports and MEP requirements

• Duct sizing, sheet metal calculation & static determination

• Pipe sizing, static, run out & pump head calculation

• Equipment selection & plant room design

• BMS Controls Drawings

• Water supply & drainage system designing

• Specification & Detail B.O.Q preparation

MAJOR PROJECTS:

• Port Place Dalhousie Residential & Commercial Building

• Forensic and Coroner centre Toronto, Ontario.

• Osgood law school York university Toronto, Ontario

• Niagara health Systems (NHS) Hospital Niagara, Ontario.

• Toronto Police Station (Div.14), Toronto, Ontario.

NORR Limited, Toronto July 2008 – April 2009

Senior Mechanical Engineer

DUTIES & RESPONSIBILITIES:

• Participate in design coordination meetings

• Perform heating/cooling load calculations & air balancing

• Prepare concept reports and MEP requirements

• Duct sizing, sheet metal calculation & static determination

• Pipe sizing, static, run out & pump head calculation

• Equipment selection & plant room design

• BMS Controls Drawings

• Water supply & drainage system designing

• Specification & Detail B.O.Q preparation

MAJOR PROJECTS:

• St Marks Coptic Church Scarborough Ontario

• Hotel, Casino & Palladium New Brunswick

• Exhibition Place Toronto Ontario

• Jabel Ali Free Zone ( 4No.s Tower building of commercial and residential building with Combine Hallo and Podiums) Dubai UAE

Jain & Associates, Mississauga August 2005 – June 2008

Senior Mechanical Engineer

DUTIES & RESPONSIBILITIES:

• Participated in design coordination meetings, planed design jobs and monitored progress

• Modeled buildings as per LEED and MNECB/CBIP standards

• Performed heating/cooling load calculations & air balancing

• Prepared concept reports and MEP requirements

• Duct sizing, sheet metal calculation & static determination

• Pipe sizing, static, run out & pump head calculation

• Psychometrics analysis for dehumidification & humidification

• Selected equipment and created plant room designs

• Water supply & drainage system designing

• Compressed air and medical gases system design

• Specification & Detail B.O.Q preparation

MAJOR PROJECTS:

• OPP Rockwood Police Station

• Clifford Library

• Cooks Town Library (LEED), Ontario.

• Zahra Hospital, Dubai, UAE

• MBS-ITHR 5th Level office renovation 393 University Avenue, Toronto

• Spark Royal Hotel, Sharjah, UAE

• Hilton Garden Inn, Mississauga

• Marriott Springhill Suites, Mississauga

• Apartment Building, 1000 Mt. Pleasant Road, Toronto

• Marriott Residence Inn, Kingston

• Players Golf Club, Flamborough

GEMAC Dubai, UAE Feb 2005 to July 2005

Head of Mechanical Department (Mechanical and Electrical Consultants)

DUTIES & RESPONSIBILITIES:

• To check the design work of junior engineers.

• To attend the design coordination meetings.

• To make the progress Planning of design jobs.

• Checking of heat load calculation & Air balancing.

• To prepare the concept report

• To make the MEP requirements

• Duct sizing, sheet metal calculation & static determination.

• Pipe sizing, static & run out & pump head calculation.

• Psychrometric analysis for dehumidification & humidification.

• Equipment selection & Plant room designing.

• Water supply & drainage system designing.

• Fire detection and fire protection system designing.

• LPG (Liquefied Petroleum Gas) System designing.

• Compressed air and medical gases system designing

• Specification & Detail B.O.Q preparation.

• Comparison statements of contractors and suppliers.

• Drafting supervision & Checking of Shop drawings.

• Site work supervision and Equipment commissioning Supervision.

• To liaison with government authorities like civil defense, municipalities and DEWA, FEWA & SEWA

MAJOR PROJECTS HANDLE:

• 2 nos. G+46 Storey & 1 no. G + 36 Storey Pearl Towers – Bahrain

• G+13 Al Nibras Building (DUBAI)

• Multi-Storey Car Park for Dubai Municipality at Sabkha, Dubai

• 3 nos. 132 kV Substation

• 3B+G+34 Time Palace Tower

• 3B+G+30 Manchester Tower at Marsa, Dubai

• B+P1+P2+34 Saba Tower at Plot No. E2 Jumeirah Lake Towers

• National Falcon Centre for Dubai Municipality

• G+2 Showroom for Lotus Tower

• Al Areen Warehouse at JAFZA

• 9 Residential/ Commercial Buildings in Abu Dhabi

• American School at D I P, Dubai

• Site 35 Twin Golf Views Towers Development for EMAAR Properties

• G+40 Building at Jumeirah Lakes at Plot M3, Cluster M

• G+12 Residential/ Commercial Buildings in Abu Dhabi

• G+6 Residential/ Commercial Buildings in Dubai

• 2B+G+7 Al Fardan Hotel Dubai

• B+G+6 al Fatten Building dubai

• 4B+G+4 Park Levels+58 storey Kharbash Tower Dubai

• China Town in Garden(Ibna-e- Batota) Shoping Mall

Ian Banham & Associates, Dubai, UAE 2000 - 2005

Mechanical Design Engineer (Mechanical and Electrical Consultants)

DUTIES & RESPONSIBILITIES:

• Prepared concept reports

• Documented MEP requirements

• Heat load calculation & air balancing

• Duct sizing, sheet metal calculation & static determination

• Pipe sizing, static & run out & pump head calculation

• Psychrometric analysis for dehumidification & humidification

• Equipment selection & plant room design

• Water supply & drainage system design

• Fire detection and fire protection system design

• LPG (Liquefied Petroleum Gas) System design

• Compressed air and medical gases system design

• Specification & Detail B.O.Q preparation

• Comparison statements of contractors and suppliers

• Drafting supervision & checking of Shop drawings

• Site work supervision and equipment commissioning supervision

• Liaison with government authorities (Civil Defense, municipalities, DEWA, FEWA, SEWA)

MAJOR PROJECTS:

• ERCO Technical Block, Sharjah Port

• 2+G+30 Hotel+Offices+Residential Tower Bldg At Al Wahda Street, Sharjah (2900TR)

• 3B+G+34 Commercial and Residential Building for Ghulam, Derwaish, Dubai

• 3B+g+40 story building, Dubai Marina

• G+43 Story Capricorn Tower, Dubai

• AL Raha Beach Resort, Abu Dhabi

• AL Rashid Hospital, Dubai

• District Cooling Project By KATTNER/FVB, Canada (21,000 TR Plant)

• Dubai Media City

• 3B+G+M+34 storey Building, Dubai Marina

• IBIS & Novatal Hotel

• Team Young and Rubican Building, Media City

• B+G+M+40 Storey Tower Form /S. Rashdin Trading Company, Dubai

• 2B+G+M+7 Commercial Bank of Dubai, Ajman

• G+43 Story Tower for Dubai Islamic Bank

• B+G+24 Commercial/Residential Building National Bank of Sharjah

• Light industrial units, JAFZA

Consultair, Dubai, UAE 1999 - 2000

Mechanical Design Engineer (Mechanical and Electrical Consultants)

DUTIES & RESPONSIBILITIES:

• Heating load calculations & air balancing

• Duct sizing, sheet metal calculation & static determination

• Pipe sizing, static & runout determination & pump head calculation

• Psychrometric analysis for humidification & dehumidification

• Equipment selection & plant room designing

• B.O.Q preparation

• Comparison statements of contractors and suppliers

• Drafting supervision & Shop drawing checking, and work site supervision

MAJOR PROJECTS:

• G+6, Residential Complex, SHARJAH

• G+10, Residential Complex, SHARJAH

• G+P+12, Residential Complex, SHARJAH

• G+M+18+Pent, Residential Complex, SHARJAH

A. Saddat & Company, Karachi, Pakistan 1996 - 1999

HVAC Design Engineer (Mechanical Consultants)

DUTIES & RESPONSIBILITIES:

• Area calculation w.r.t. Orientation

• Heating load calculation & air balancing

• Duct sizing, sheet metal calculation & static determination

• Pipe sizing, static & runout determination

• Psychrometric analysis

• Equipment selection & plant room design

• B.O.Q & Tender preparation

• Comparison statements of contractors and suppliers

• Drafting supervision site supervision

• Worked on AutoCAD & operated HP Design jet 220 plotter

MAJOR PROJECTS:

• Community Health Services & JUMA Research Building, Agha Khan University & Hospital (400TR)

• Smith Kline Beecham, Karachi Pharmaceutical Plant (200TR)

• Glaxo Welcome Pak Pvt. Ltd. Pharmaceutical plant (400TR)

• Liaquat National Hospital, Karachi (180TR)

• Agha Khan University Centre Sports Complex

• Executive Tower Karachi, Commercial Building

• LUMS Lahore, University Complex (200TR)

• Al-Azhar Garden, Residential Complex (Plumbing & Fire fighting)

Precold Pvt Ltd., Karachi, Pakistan 1995 – 1996

HVAC Engineer (Contracting Company)

DUTIES & RESPONSIBILITIES:

• Sales and after sales service

• Cooling tower installation supervision

• Equipment selection according to application requirements

• Chiller fabrication and installation supervision

• Load calculation, pipe sizing and duct designing

• Commissioning of system

• Maintenance work supervision

MAJOR PROJECTS:

• Candy Land (Ismail Industries), Hub Balochistan

• Johnson & Johnson, Karachi

• Aortal Food Industries, Karachi

• Dan Pak Food Industries,Karachi

• Metax Deck, Karachi

• Freed Hotel, Islamabad

EDUCATION

1) NED University of Engineering & Technology, Karachi, Pakistan (1995)

Bachelor of Engineering (Mechanical)

2) Ryerson University Toronto, Ontario, Canada (2010)

M.Eng. (Mechanical & Industrial Eng.)

3) Professional Engineers Ontario, Canada (2010)

P.Eng.

4) Canada Green Building Council, Canada (2010)

LEED.

TECHNICAL QUALIFICATIONS

Proficient in Microsoft Office, AutoCad 2004- 2010, Building Systems 2006, E-20II, Hap4.4, TRACER, ELITE, Memate HVAC, Right suite HVAC, HVAC solutions & Engineering software

PROFESSIONAL AFFILIATIONS

• ASHRAE and OACETT Member

• Institute Of Refrigeration, U.K.

• Institution of Engineers, Pakistan

• Pakistan Engineering Council

• Blue Globe Club 0f GROHE

Contact this candidate