Project Manager

SAMEER SINGH

PROFESSIONAL HIGHLIGHTS:

* ***** ** ********** ** railway signalling. BE(ECE)+ PGDBA in Operations Mgmt.

Currently working as Signalling Site Manager for Delhi Airport Metro Express Project

Experience in MRTS, Main line signalling, SSI, Relay logics and circuits, Advanced systems like 2oo3 , ATC, ATS, ATO, AFTC, Automatic crossing control circuits, ERTMS.

Project Highlights: DAMEPL, HMRL, DMRC, I R, DART( N A), Holland rail(ERTMS)

Developing technical and commercial specifications for Hyderabad Metro Project.

Design, Installation, Testing & Commissioning activities for Interlocking, ATC and ATS subsystems for Delhi Metro rail Project in Line1 & Line2. Designed and tested track side ATC system and interfaces with On-Board train system. Preparing test cases, test reports

Undergone 2 months training for CBI, IXL Design at Alstom France.

ERTMS Design covering various aspects of data preparation, verification & validation for RBC, Balises, Middleware for Betuwe Route at Alstom Belgium on work Permit basis.

Designing VHLC based SSI system for Central & East Coast Railway. This includes the definitive and detailed design, simulation testing, Module testing

Designing Automatic rail road crossing controller circuits for DART (North America).

Designed Microlock based SSI system of Indian Railway (NR & NCR). This includes route control chart, application programming, field circuits, relay based analysis.

Managed the design, specifications, procurement, installation, system interfacing, commissioning and project closing for the railway signaling CoE project.

CREDENTIALS:

Signalling Designing application logic program based on British Signalling principles for MRTS, Indian railway. Field circuit Design. IXL- ASCV, MICROLOCK, VHLC, SIMIS/SICAS, ATC-URBALIS 300, LZB700, AFTC- SDTC, FTGS917, Installation, T&C, System integration,

Signalling Tools Simbool, ADES2, CAA for IXL design & testing, OMAP,GDPP for ERTMS

System Interface trackwork , civil & viaduct, Rolling Stock, Platform Screen door, Telecom, Tunnel ventilation, station, Traction & power control, SCADA & BEMS

Project Planning Tools Primavera P3, Microsoft project Planner 2003, MS Visio.

TRAININGS:

Technical

Presented Case Study “Railway signaling- A fail safe Design” in System Engineering Workshop

Awarded “Roll of Honor” by Satyam for imparting training thro webinar and classroom sessions

Undergone training on ERTMS, Configuration mgmt, Anomaly Mgt at Alstom Transport Belgium.

Undergone training on computer based interlocking at Alstom Transport France

Imparted 3 days trainings to DMRC Junior Engineers on ATC.

Management/Personality Development

3 Days PACT workshop for project kickoff with other system wide project managers

4 Days workshop on Project management Professional (organized by PMI)

Experience:

Siemens Ltd, Delhi (May 09 till date) as SITE MANAGER (Railway Signalling)

Project: Delhi Airport Metro Express Project Ltd

Project Profile: DAMEPL is the first high speed airport link project in India. It consists of both tunnel & elevated area with double line operation over a length of 22.5km and a depot. Additional features of Platform screen doors, check in & baggage handling facilities.

Role: Site techno Manager

Job Profile:

- Carry out installation, testing & commissioning of line as per the contract requirement

- Leads site management functions in alignment with project and client goals and objectives.

- Interfacing with civil, trackwork, building management services, Traction & LV power, Rolling stock, Telecom, Platform screen doors, Station management services

- Collaborates with contractors and subcontractors, ensuring the timely contract completion.

- Responsible for ensuring that the Contractors deliver the Scope of works and any Variations Orders within the time scale and cost while ensuring that Siemens's Safety procedures and safety management systems are being adhered by subcontractor and Siemens's site supervisors

- To ensure that Sub-contractors maintain the installation standards set by Siemens

- Preparing material control schedule for the local procurement items

- Preparing detailed estimates & BoQ for subcontractor

- Seek prior design approvals & vendor approvals for local procurement

- Preparing method statements for site installation

- Augment manpower and informing management for acceleration measures

- Responsible for all Site requirements, Preconditions, Access and handing over.

- Set up a daily, weekly and monthly progress update mechanism

- Providing value engineering proposals to reduce cost.

- Preparing Work Programme and schedules.

- Ensuring proper execution of correspondence test cases, ToC and train tests

Satyam Computer Services Ltd, Hyd (Dec 06 – Apr 09) as DESIGN ANALYST (Railway Signalling)

Project: Hyderabad Metro Rail Project

Project Profile: Hyderabad Metro Rail is a BOT Project based on PPP model. It consists of three Corridors with a total length of 71km. The revenue line Signaling and Train Control System shall be a CATC, comprising ATP, ATO & ATS for bidirectional working

Role: Signalling Expert

Job Profile:

- Developing requirement documents including Instructions to tenderer, conditions of contract, General Specification, Performance & technical specifications.

- Signalling & Telecom Interface with rolling stock, viaduct, trackwork & Alignment, Traction, AFC

- Benchmarking technical specifications for various metros to get the best in class technology

- Appreciation of concession Agreement clauses to form detailed specifications

- Benchmarking commercial terms across various metros for S&T, Rolling stock & AFC .

- Benchmarking Suppliers & perform vendor analysis.

- Comparative Analysis of various Proposals

- BoQ Estimation and providing indicative quantities.

- Providing value engineering proposals to reduce cost.

Project: Railway Signalling CoE Project

Project Profile: The COE setup comprises of a controlling unit, field panel, control panel and VDU. The basic signalling principles, design & Testing procedures are the same as followed by railway industries. The objective is to train new signaling Engineers, simulate signaling particularities and demonstrate signalling competencies to the potential clients.

Role: Project Lead

Job Profile:

- Preparing Project proposal document (Including Feasibility studies, Scope statement, Activity duration estimation, resource estimation, cost estimation & Risk Analysis)

- Preparing Return On Investment Document and User Requirement Document

- Resource Allocation & Release and Project progressing & Control

- Completed project, 20% under Budget and within time through value engineering.

- Ladder logic programming for FX2N Mitsubishi PLC for 256 I/O and SCADA interfaces.

- Install and commission the setup

- Writing test cases and perform simulation testing

- Maintaining project document as per the QMS.

Project: GETS Global Signalling

Project Profile: It is a VHLC based SSI project for Indian Railways. It includes signalling design work for 13 stations of central Railways & 8 stations of East Coast Railways.

Role: Project Lead

Job Profile:

- Control Table Design, Application logic programming & Field Circuit designing

- Module testing and Factory Acceptance Testing

- Estimation of station Hardware and Generation of BOM

- Designed AHCWS circuits for 8 crossings of DART NA.

Additional Responsibilities:

Generating monthly progress Report

Weekly progress update meeting with the manager & the client.

Consolidating effort data for the entire team & invoicing

Coordinating with the client for the task allocation & performance feedback

Ansaldo Signals, Noida (June 06 to Dec06) as Design Engineer

Project: Microlok based Solid State Interlocking Design for NR & NCR of Indian Railways.

Job Profile:

- Design & verification of Interface circuit.

- Generation of Vital & Non-Vital Bit Map, Relay rack, Relay contact Analysis & Terminal Analysis.

- Designing & verification of Route control chart.

- Designing Application logic program for main line.

- Coordinator, Planner for TPWS North Project for Initial phase.

Alstom Projects India Ltd.

1. Project: ERTMS level 2 data preparation for Betuwe Route (A15 and HSP) of Holland rail.

Role: System engineer. Earlier deputed at Alstom Belgium for 1 year (Nov 2004 to June 2006)

Job profile:

- Configuration management of files & tools.

- Designing application data of Radio Block Center, Balises & LCS.

- Installation of software, Restoring databases, Backups, Defining Actors, Creating Sets.

- Baseline Mgmnt, Anomaly mgmnt & Change mgmnt thro’ ClearCase and ClearQuest.

2. Project: Delhi Metro Project, Khyber Pass New Delhi

Initially T & C Engineer and later appointed as System Engineer at Resource Group.

Role: System Engineer (Apr 2004 - Nov 2004)

Job Profile:

- Data Preparation, Verification &Validation for microprocessor based interlocking ( SIL 4)

- Control Table preparation and Generation of Boolean Equations for interlocking.

- Developing relay circuits for field interface.

- Timing Diagram Analysis for proper execution of command & signalling particularities.

- Checking for any unsafe condition & implementing corrective measure.

- Programming data into EPROM’s & testing them on site.

- Static testing of data using field simulator & later with site engineers for onsite testing.

- Generating test scenarios and Validation of EPROM data using s/w tools

3. Project: Delhi Metro Rail Project

Role: Testing & Commissioning Engineer (April 2003 - Apr 2004)

Job Profile:

- Testing & Commissioning of trackside system, fiber optic link & on-board system for ATC.

- Installation of software & programming data into PCMCIA , ID cards & other ATC cards.

- Tuning track circuits for maximum power transfer for rail detection & rail transmission.

- Testing of Automatic Train supervision system.

- identifying system interface, documentation of test case, actual performance on site with client

- Subsystem Tests for ATC, IXL including the system static, dynamic and multiple train testing.

- Correspondence tests with various subsystems

- Multiple train Test and trial running.

Job Responsibilities:

- Writing Test Procedures & Test Reports.

- Reporting non-conformities and re-tests of solved non-conformities

- Coordinating with other departments & the client.

- Assuring required quality & safety standards.

( August, 2001 - April 2003) worked with -

R.S.B. Systems Pvt. Ltd., Electronic city, Gurgaon ( Hr.)

Company Profile: R.S.B Systems Pvt. Ltd is an ISO 9001:2000 certified company. It is involved in the analysis of Electronic Circuits/Components, IC’s & Memory Modules and development of the database.

Process Incharge (Component Engineering): Lead a team of more than 6 Engineers. To carry out the analysis of electrical, architectural and mechanical parameters of IC, memory modules & components.

Job Responsibilities Report the following to the manager

- Manpower list for processes and Allocation of production work.

- Interaction within inter as well as intra processes

- Achievement of process targets as per client and company requirements.

- Records for non-conformity and corrective measures including databases of defects.

- Liaison with software development for process enhancement keeping manager informed.

- Maintenance of quality and productivity records under Manager.

Qualification:

Qualification College/Institute University/Board Year Marks

BE Honors (Electronics & Communication) Apeejay college of Engg. MDU Rohtak 2001 71.25%

PGDBA(Operations Mgmt) Symbiosis Pune SCDL Pune 2006 64%

AISSCE 12th K V Gurgaon CBSE 1997 75%

AISSE 10th K V Gurgaon CBSE 1995 76.6%

Personal Details:

Father’s Name: Sh. Ved Prakash

Date Of Birth: 3rd January 1979

Passport no. E-4719502 with valid H1B visa

Marital Status: Married

Address(permanent) H.No.15, Welfare Society, Behind Salwan School, sec-15 –II Gurgaon-122001

Contact this candidate