Engineer Electrical
Resume:
SURESH G
Project Engineer
Wipro Technologies Limited
Mail : ***.******@*****.***
******.***@**********.***
Objective
To be a Dynamic and Successful Engineer to work in a challenging environment where I can best utilize my skills to grow along with the organization.
Experience
Aug 2011 – Present as Physical Design Engineer
Wipro Technologies
• Undergone job training for three months in VLSI
• Undergone job training for three months in Physical Design
• Completed three levels of WIPRO internal certifications in Physical Design
• Worked on Synopsys ICC and Cadence Encounter
• Acquainted with Sample projects in Physical Design at Block level
Description:
Design Name : LEON 3MP (Quad core)
Leon3mp was a quad core processor which is having 120k standard cells and 80 macros. Here we have followed flat approach for this design to complete the Placement and Routing flow. We have prepared IO plan, floor plan, placed all the macros manually and carried out the P&R flow. In this design we carried out IR Drop, DRV fixing and STA.
Skills
Good knowledge on physical design and the flow concepts like IO planning, Floor planning, Placement, Routing, Static Timing Analysis (STA), Clock Tree Synthesis and Physical Verification concepts (DRC & LVS).
Languages - C, Verilog HDL, PERL
Place and Route Tools - Synopsys ICC, Cadence Encounter
Education
2009 – 11 Kumaraguru College of Technology, Coimbatore.
Autonomous, Anna University, Coimbatore
M.E. Power electronics and drives
- 90 %
2005 – 09 Bannari Amman Institute of Technology.
Anna University, Chennai
B.E. Electrical and Electronics Engineering
- 78 %
2003 – 05 Ideal Matriculation Higher Secondary school, Anthiyur.
State Board
- 91 %
2002 – 03 Government Higher Secondary School, Gobi.
State Board
- 88 %
Internship
Summer, 2007 TamilNadu Newsprint and Papers Ltd, Karur.
Attended ten days training on Electrical and Instrumentation Department.
Summer, 2008 Bannari Amman Sugars Private Ltd, Nanjangud.
Attended one week training on Co-Generation Plant.
Projects
• M.TECH Project : Novel Circuit Configuration for Reactive Power Compensation in Induction Generator
Faculty Guide: Asst Prof K.Malavizhi
Description:
A novel circuit configuration for reactive power compensation of an induction generator is proposed in this project. This reactive power compensator includes an ac power capacitor set serially connected to a small-capacity power converter. The ac power capacitor is adapted to provide basic reactive power and reduce the voltage rating and power capacity of the power converter. Because, the ac power capacitor set can also effectively block the dc voltage generated by the power converter to the utility, the salient point of the proposed reactive power compensator is that only a two-arm structure is required for the power converter in the three-phase three-wire application. Consequently, the required number of power electronic switches for the power converter is reduced.
• B.TECH Project : Auto Set Change System For Winder Machine
Faculty Guide: Asst Prof Mrs.T.Tillaikarasi
Auto Set Change system automates the winder machine operation in paper mill by using PLC programming. In this project we are performing seven different operation in winder machine.
Software: Siemens Sematic Manager
Programming: PLC
• Automatic Head Light Controller
Faculty Guide: Senior Lecturer Mr.S.Sivaraman
The objective of the project is to control the operation of head light of a vehicle by using Light Dependent Resistor in the circuit. It is used to switch from high beam of light to low beam of light when the vehicle coming opposite to it.
• Flat Plate Collector
Faculty Guide: Prof K.Balakrishnan
Efficient Usage of Direct and Diffused solar radiation to heat the water by using flat plate collector. In this model we have used glass over the flat plate collector to improve the efficiency. Because of this glass the heat will not reflected back to atmosphere in the form of heat wave radiation.
Papers and Workshops
• Presented a paper titled “Application of boost converter for Ride-Through Capability of Adjustable Speed Drives during Sag and Swell Conditions”. In a Paper Presentation Contest of National Level Technical Symposium organized by Association of Electrical and Electronics Engineering
(Bannari Amman Institute of Technology).
• Presented a paper titled “Application a STATCOM for Stability Improvement to an Existing Wind Farm with Fixed – Speed Induction Generators”. In a Paper Presentation Contest of National Level Technical Symposium organized by Association of Electrical and Electronics Engineering
(Kumaraguru College of Technology).
• Attended a workshop on “Power Factor Improvement Methods in Power System” conducted by Electrical and Electronics Engineering (Bannari Amman Institute of Technology).
• Attended a workshop on “Recent Trends in Virtual Instrumentation Applied to Electrical Engineering” conducted by Electrical and Electronics Engineering (VLB Janaki Ammal College of Engineering and Technology).
Positions of Responsibility
• Member of the organizing committee in “Basket Ball Tournament’’ conducted by EEE student branch.
• Member of organizing committee in two day workshop on “Power Factor Improvement Methods in Power System” conducted by Electrical and Electronics department.
• Appointed as the Join Secretary for EEE Students Association during the academic year 2008 - 09.
• Member of “Nature Club” in my home town.
• Member of NSS in the year 2007 - 09.
Interests
• Sericulture.
• Playing cricket.
Personal Information
Date of Birth : 30th July 1988
Father’s Name : Mr. C.Gnanasambantham
Mother’s Name : Mrs.G.Sivakami
Address : 122,Pichandampalayam,
Polavakalipalayam,
Gobi,
Erode-638 476
Phone No. : 042**-******
Mobile No. : 080********
E – mail ID : ***.******@*****.***
Languages Known : Tamil and English
Declaration: The information furnished above is correct to the best of my knowledge.
Date : (Suresh G)
Place:
Contact this candidate