Electrical Engineer

DOUGLAS Q. CAMPBELL, JR.

Permanent: **** Ekom Beach Rd., Laurens, SC 29360

864-***-****(C) ; 864-***-****(H)

pe0f1f@r.postjobfree.com or pe0f1f@r.postjobfree.com

Years Experience: 10+

PROFESSIONAL EXPERIENCE

• Experienced in reading Schematic and Wiring Diagrams

• Instrument and Wiring check-out, reading schematics, system walk-down

• Maintenance Training simulator project for U.S. Air Force C-17 D.O.D.(Department of Defense)

• Electrical drawing updates for Metropolitan Transportation Authority

• As-built drawing updates for Nuclear(Duke Energy) and D.O.E.(Department of Energy)

• Autocad 10 years of experience (versions 12,13,14, and 2000, 2006)w/CAD Overlay

• Intergraph Microstation 4 years of experience (versions 5,95,SE,J,8)w/Iras-B

• Software: Excel, Word, Filemaker Pro

• Operating Systems: Windows 95, 98, NT, 2000, XP

• Certificate in Pro-Engineer basic class (version 2000)w/approx 6 months of experience also Intern experience with Wildfire 2.0(Spring 2010)

EDUCATION

University of South Carolina – Columbia, South Carolina

B.S. in Mechanical Engineering – 75.5 hours of 126hours taken

Piedmont Technical College – Greenwood, South Carolina

CAD Certificate- (5/2010) updated training in Autocad(v2010), Architectural Drafting, Solidworks(v2009) and Autodesk Inventor(v2010) Mechanical Drafting

Greenville Technical College – Greenville, South Carolina

Associate in Engineering Graphics Technology

Limestone College – Gaffney, South Carolina

B.S. in Business Administration Management

Piedmont Technical College – Greenwood, South Carolina

Associate in Engineering Technology

• Major in Electronic Engineering Technology

CERTIFICATIONS

FCC General Radiotelephone Operator’s License

w/Ship Radar Endorsement (1990)

WORK EXPERIENCE

November 2008 to February 2009

Intergraph 3D Designer

Under contract to Lawrence Livermore National Laboratory, Livermore, CA-Updating P&ID for Tritium Processing System using Autocad v.2006 for (ICP) Inertial Confinement Fusion experiment for the (NIF) National Ignition Facility. Also, layout and design of Hazardous Materials ventilation and recovery system using Intergraph 3D and PDS and Smartplant to support the Laser diagnostics group.

May 2008 to October 2008

PDS EE Raceway Electrical Designer

Under contract to Bechtel/Parsons Bluegrass Army Depot, Richmond, KY-Creating Electrical drawings for the Chemical Demilitarization Facility using PDS EE Raceway, PDS Equipment modeling and Microstation(VJ). Drawings updated with layout of raceway and conduit for Electrical and Instrumentation systems.

November 2007 to February 2008

Smartplant P&ID Drafter

Under contract to GE Gas Turbine Accessories Group-Greenville, SC-Creating P&ID drawings for the Gas Turbine Accessories Group using Smartplant P&ID. Drawings created for Gas Turbine support equipment(hydraulic skids, piping systems for fuel, water, oil, ect., air and pneumatic piping systems, mounting frames and structures, ect.

March 2007 to October 2007

PDS Piping Designer

Shaw/Areva-Aiken, SC- working as a Piping Designer on the MOX(Mixed Oxide) Nuclear Fuel Project. Checking rooms for correct Isometric Sheet numbers and Extracting Isometrics for checking. Also making corrections to piping model using PDS Piping modeling software and Smartplant.

July 2006 to September 2006

CAD Drafter/Designer

Under contract to CEntry Engineers and constructors at Salt Lake City, Utah

CEntry Engineers and Constructors –Salt Lake City, Utah Piping Designer working with Piping Plans, Sections,and Details on Microstation(v8) on Natural Gas Compressor station for Questar Energy compressor stations in Roberson and Rock Springs, Wy.

December 2004 to July 2006

CAD Drafter/Designer

Under contract to Duke Energy – Belews Creek Steam Station – Belews Creek, NC

Updating P&ID’s, General Arrangement, and Electrical and Instrumentation drawings for SCR (Selected Catalytic Reduction System) for large Fossil Fuel Power Plant using Microstation (v7.1, v8.1, and IrasB). Responsible for Field Verification, Incorporating Design Changes, and maintaining As-Built drawing status for the plant. In November 2005, transferred to Catawba Nuclear Station – York, SC - to work as a Piping Designer on Service Water project. As-Built drawings on Microstation (v8 and IrasB).Returned to Belews Creek in April, 2006.

November 2001 to November 2003

2D Designer

Under contract to BSRI – Westinghouse Savannah River Site, Aiken, SC

Deptartment of Energy Facility –Configuration Management department/Liquid Waste Transfer-DMM. Updating Drawings for the Tritium facility using Microstation (vSE, J) and IrasB. Also work in High Level Waste Division. Work involved P&ID’s, Electrical and Instrumentation, and Mechanical/Piping Systems.

September 1999 to November 2001

Electrical CAD Drafter

Under contract to Union Switch and Signal, Batesburg, SC

Updating drawings for LIRR (Long Island Railroad), Great Neck, NY project. Also worked on crossing project for Newport, Washington. Work involved track layout drawings, Main hut, Battery cases, and circuit drawings on Autocad(v.14 and v.2000)

July 1999 to September 1999

Electromechanical Designer

Under contract to AAI/ESI, Summerville, SC

Boeing C-17 Maintenance Training Simulator program. Updating drawings for Maintenance Simulators for US Air Force. Working on overhead circuit breaker panels in cockpit area, piping and supports in wing structure for fuel storage simulator, and layout of Com/Nav equipment in Radome for Avionics(Weather Radar, Glide Slope, Localizer, and TACAN antennas) using Autocad(v.14) and DOD standards.

February 1999 to July 1999

Electromechanical CAD Designer

Under contract to AVX(Kyocera), Myrtle Beach, SC

Detailing parts for connectors and cabling devices using Autocad(v.2000). Also working with Geometric Dimensioning and Tolerancing(ANSI Y 14.5).Updating and modifying existing drawings using Pro-Engineer(v20) and v.2000i for connectors to be manufactured by Plastic Injection molding method.

Contact this candidate