GHOLAM H. YOUSEFI, M.SC, Ph.D. Office: 613-***-****

**** ***** ***** ******** *-mail: ofvhxy@r.postjobfree.com,

Gloucester, Ontario ofvhxy@r.postjobfree.com.

K1J 6G1

Lead Scientist in Epitaxial (MOCVD, Thin films, & Vacuum system), Materials Science, Dimension Metrology & electro-optics.

Skilled Physicist with proven product development and project management abilities

in the Research & Development and Manufacture of Semiconductors, Aerospace Research

and Standard (Mechanical Metrology & Electro-optics).

In-depth experience with MOCVD epitaxial growth and processing of

III-V compounds for optoelectronic and microelectronic devices.

• Characterization of InP-based materials and devices by SIMS.

• Familiar with the Hall, DLTS, PL and X-ray diffraction measurements techniques.

• Experienced with the fabrication of Thin Film Electroluminesence

(TFEL) Panel displays using photolithography and e-beam evaporation.

• “Hands-on” experience with Phillips 515 Scanning Electron

Microscopy (SEM), TEM and EDAX.

• Familiar with Shimatsu UV-365 Spectrophotometer.

• Trained in ISO 9001:2000 quality management system.

• Computer literate: Unix, Mac, PC, Filmmaker Pro, Promis, NT,

Plus FORTRAN and basic computer programming.

• Works calmly and efficiently under pressure to meet deadlines

and corporate objectives.

• Demonstrated commitment to teaching and training.

• Very strong analytical and problem solving skills.

• Creative, dedicated and professional.

• The Quality Engineering Test Establishment (QETE) to investigate the failure analysis case history of Canadian Forces Aircraft landing gear components.

• Failure analysis and fractography investigation of crack existence in F/A-18 centre fuselage and some other aircraft. Using SEM to find the crack initiation and propagation. Additionally in finding the crack dimension, orientation and crack origin, fatigue etc.

• Extensive experience with the calibration of physical properties reference standards and laboratory test equipment for dimensional metrology (Gauge blocks, check master, ZEISS CMM, etc) and electro –optics.

• Experience in properly aligning the BORESIGHT TELESCOPE

• Experience in NVIS inspection scope.

• Experience in individual; weapon sight (IWS) evaluation like filed of view, resolution, brightness etc using integrating sphere, collimator lens with 1255mm focal length and photometer.

• Extensive experience in the development of high tech / high precision electro-optic products for military defense programs.

• Experience in calibrating Ground Laser Target Designator (GLTD).

GHOLAM H. YOUSEFI, M.SC, Ph.D. 2

PROFESSIONAL EXPERIENCE

• Calculating Laser Target Designator safety analysis using p-i-n InGaAs and Si-detectors.

• Experience in Electro-Optical imaging system for thermal imaging.

• Extensive experience in preliminary test for laser-illuminated imaging systems that provide-optical augmentation for search-and-rescue operations and natural night vision.

• Experience in laser rangefinders, fire control and tracking products.

• Visible and infrared lasers and associated electronics experience

• Experience in Xenon reference lamp calibration using spectrophotometer.

• Extensive experience in laser manufacturing experience a plus experience with diode lasers, diode pumped solid state lasers

• Extensive experience with non-linear optics, fiber lasers,

• Extensive experience in plans technical development projects, development of optical and/or electro-optic products.

• Supervise project team members, track and report project progress.

• Extensive experience in lead technical development tasks Provide state-of-the-art technical information concerning pulse generation and propagation in fiber and free space pulsed laser systems.

• Extensive experience in InP based structures for infrared detectors

• Trained in the Essentials of Supervising and Management in the Public service during 2007.

• Trained in Public service “Project Management” course, during 2008.

BACKGROUND

October 2005-Present: Working at the department of National defence in Metrology and Standard lab. Incharge of mechanical metrology & Electro-optics.

October 2003 –October 2005 I have been working with the Department of National Defence - The Quality Engineering Test Establishment (QETE) division. Investigating the analysis and failure case history of Canadian Forces Aircraft landing gear components; wings, fuselage cracks, etc.

May 1995 – October 2003 - Bookham Technology Inc., through the integration of their recent acquisition of Nortel Networks Optical Component Division and responsible for the technology transfer and product inventory build prior to the closure of the Ottawa plant. As Senior MOCVD Engineer of Indium Phosphide Wafer Processing Optoelectronics, I am responsible for the growth of InP-based laser materials for high-speed fiber optical systems.

My career also includes five years as a Research Officer for the National Research Council involved in work related to TFEL large panel displays. In addition, I was Assistant Research Officer in the Advanced Epitaxy/Advance Processes group at the Institute of Microstructural

Sciences (NRC). While there I worked on a contract for the Defence Research Establishment Ottawa (DREO) carrying out studies of the deep level defects in crystal growth.

GHOLAM H. YOUSEFI, M.Sc,Ph.D. 3

Professional Experience (cont’d.)

Additionally, I was a Lecturer in the Physics Department at Sardar Patel University for two years, I currently referee two academic journals and I have been invited as a speaker and visiting researcher to:

McMaster University, Hosei University (Japan) and the RIKEN Institute of Physical and Chemical Research (Japan).

PROFESSIONAL EXPERIENCE

An effective member of the R&D and Manufacturing team, I have excellent communication skills (fluent in both English and French) and I get along well with people at all levels.

October 2003- to Present Department of National Defence

Senior Materials Scientist

. Responsible to investigate the failure analysis case history of Canadian Forces Aircraft landing

gear components & Mechanical Metrology and electro-optics.

November 2002 – October 2003 BOOKHAM TECHNOLOGY

Senior Epitaxial Engineer

• Responsible for the technology transfer and product inventory build leading up to the closure of the Ottawa plant and the relocation of operations to two sites in England.

May 1995 – October 2003 NORTEL NETWORKS

Senior Epitaxial Engineer,

Indium Phosphide Wafer Processing Optoelectronics

Responsible for the growth of InP-based laser materials for Optoelectronics

(Manufacturing and R&D Divisions) and high-speed electronics by MOVPE technique.

• Responsible for the growth of lasers and long wavelength PIN and APD photo detectors for high-speed fiber optical systems.

• Devices grown include high power DFB lasers (WDM), VHT lasers, BH LASER, M-Z OC-48, PGC lasers, Pump LASER etc. as well as their overgrowth after processing by MOVPE technique.

• Trained and managed daytime, evening and weekend employees. Provided 24 hr. on call assistance.

• Implemented product improvement and cost reduction initiative:

- Improved yield on major product from 30% to 80% saving $0.8M annually.

- Increased efficiency of gas utilization for MOCVD reactor saving $140,000 annually.

- Reduced particle contamination on the device by 50%, which lead to higher quality and increased yield.

• Trouble shot and repaired MOCVD reactor failure and malfunctions.

• Conducted In-Situ Etching with Methyl Iodide using MOCVD reactor.

•

GHOLAM H. YOUSEFI, M.Sc, Ph.D. 4

Education & Training (cont’d.)

• Characterizations of PL, C-V, XRD, SEM, SIMS, TEM.

• Hall Effect measurements.

• Responsible for Research & Development programs.

• Received the PRIDE award (“Providing Recognition to Individuals Dedicated to Excellence) for successfully attaining the product target.

Nov. 1990 – May 1995 NATIONAL RESEARCH COUNCIL OF CANADA

Position (2) Nov 1994 – May 1995 Research Officer,

Institute for Microstructural Sciences (Thin Films Group)

Responsible for work related to the fabrication of Thin Film Electroluminescence

(TFEL) large panel displays.

• Work involved fabricating panels using photolithography and e-beam evaporation (box coater) of multilayer coatings.

Position (1) Nov 1990 – Nov 1994 Assistant Research Officer,

Institute for Microstructural Sciences (Advanced Epitaxy/Advanced Processes)

• Responsible for X-ray analysis, optical measurements, plasma emission analysis, Schottky diode formation and MIS and MOS structures of InP materials, magnetron sputtering of metals and thermal evaporation.

• Characterization by C-V, I-V, Hall effect measurements, SEM and DLTS measurements.

Defense Research Establishment - Ottawa

Worked on a contract between the DREO and the NRC

• Carried out studies of deep level defects in MBE and MOCVD epitaxial n-GaAs films and MIS InP structures.

• Additional study of InP/NgAs p-i-n photo diode devices grown by MOCVD epitaxy.

• Used DLTS, C-V and Hall effect techniques to measure the interface and bulk trap for Au/n-GaAs Schottky diodes.

• Measured the capture cross-section and energies of deep levels within the semiconductors as well as the distribution energy of the interface traps for MIS InP structures.

• Generated the deep trapping levels of n-GaAs by neutron, electron and proton irradiation.

• Measured C-V, I-V and Hall effect measurements at different temperatures to correlate changes in material properties with irradiation.

• Involved in a DND, IMS and BNR project on irradiation-induced defects on p-i-n photo diodes; 50 diodes were provided by BNR.

• Analyzed Si-MOS structures.

• Worked extensively with double and single X-ray diffractometer to determine the period, composition and crystal quality of strained-layer super lattices of InSb/In1-x Alx Sb.

GHOLAM H. YOUSEFI, M.Sc, Ph.D. 5

PROFESSIONAL ACTIVITIES (cont’d.)

1988 – Nov. 1990 SARDAR PATEL UNIVERSITY

Lecturer, Post-Graduate Department of Physics

Taught the following courses:

 Advanced Solid State Physics

 X-Ray Crystallography

 Crystal Growth and Techniques

 Thin Films

 Quantum Physics and Spectroscopy

• Worked with different types of X-ray cameras including Laue and Powder.

• Used Shimatsu UV-365 Spectrophotometer to determine the optical band gap (direct and indirect) of semiconducting compounds.

• In charge of the M.Sc. Solid State Physics and Electronics laboratories.

• Conducted several electronics and solid state practicals.

• Researched the growth and characterization of semiconductor materials grown by chemical vapour transport techniques and fabricated for PEC Solar Cells.

EDUCATION & TRAINING

Ph.D. Physics, solid-state physics (emphasis on semiconductor technology),

1990 – Sardar Patel University Growth and Fabrication of Transition-Metal Dichalcogenides Mo1-x Wx Se2 (1>x>0) single crystals grown by direct vapour transport method.

http://www.spuvvn.edu/pgd/physics/index.html

Postgraduate Diploma in Marketing Management

http://www.spuvvn.edu/pgd/mba/index.html

M.Sc. Physics (Solid State Physics & Electronics), 1987 – Sardar Patel University

http://www.spuvvn.edu/pgd/physics/index.html

M.Sc. Mathematics (Computer Science), 1984 – Mangalore University

B.Sc. Physics, Math & Chemistry, 1982 – University of Mysore

Management competencies workshop which was hold by Canadian forces management

development school.

Related Courses

Nortel Networks, 1999 – 2000

• ISO 9001:2000 quality management system

• Problem Solving and Decision Making

• Statistical Analysis Techniques

• American Vacuum Society (AVS), 1997

• Mass Flow Controllers: Fundamentals, Techniques and Applications

• Fundamentals of Semiconductor Characterization, Electrical and Optical Techniques

GHOLAM H. YOUSEFI, M.Sc, Ph.D. 6

PROFESSIONAL ACTIVITIES (cont’d.)

• Sputter Disposition

• 8-Bit Microprocessor Architecture and Interfacing, 1988

• FORTRAN and Basic Computer Programming, 1985

• Courses on Structural Life Assessment Program (SLAP) on CF-18 and other aircrafts, which was hold in Sheraton Hotel Ottawa between Oct 6 to Oct 10, 2003. The course was included

• F/A- 18 and other aircraft design, Fuselage test, NDT test, Teardown the aircraft and destructive analysis like Fractography, conductivity test, hardness test, etc.

• Courses on temperature and humidity for metrology, which was hold in QETE by “ALPHA controls and instrumentation” during January 18 to 19, 2005.

PROFESSIONAL ACTIVITIES

• Referee for the journal Optical Engineering

• Referee for the journal of Applied Optics

• Referee for Journal of King Saud University College of Engineering and Science

• Adjunct Professor at Ecole Polytechnique Montreal, 1992 – 1995

• Invited as a Research Scientist to Hosei University, Japan, 1994

• Invited as a Visiting Research Staff Member at the RIKEN Institute of Physical and Chemical Research (Semiconductor Group) in Wako, Saitama, Japan, 1993

• Invited to talk at McMaster University for the Centre for Electrophotonic Materials and Devices (CEMD), March 19, 1993.

• Author of “A novel compact optical cross-point switch on InP”,

• SPIE Proceedings Vol: 3234 pp.42-49 Feb.1998.

• Participated in the “Co-operative Education Program” at Gloucester High School and University of Waterloo; trained a graduate and an undergraduate student.

List of References, Awards and Publications will be provided upon request.

Contact this candidate