Post Job Free
Sign in

Engineer Project

Location:
Chennai, TN, 600085, India
Salary:
10000
Posted:
February 02, 2012

Contact this candidate

Resume:

Resume

Venkatesh.S

**************@*****.***

+966-********* or +65 83054268 or +91-729*******

ACADEMIC PROFILE:

Course Bachelor’s degree in Electronics and Communication Engineering.

University/Institution Anna University, Chennai.

S.Veerasamy chettiyar college of

Engg&Tech,Tirunelveli,Tamilnadu,India.

Course Completion 2005

PROJECTS IN BRIEF

S.no Project details company Locations

1 Replacement of Obsolete HC and H2S Gas detection system in RMP/PBCR/Gas plant at MAA Refinery KNPC

(Kuwait National Petroleum Company) Mina-Al-Ahmadi,

Kuwait

2 Corrosion and Scale Monitoring and Inhibitor Injection Package for SEK GC's DeltaV DCS Expansion Scope”

KOC ( Kuwait Oil Company )

Kuwait

3 Installation of New Air Assisted Flare Stacks at GC’s 17, 27 & 28 and BS-170 and Installation of Liquid Separator on 24” WK Export Gas Line”

KOC (Kuwait Oil Company )

Kuwait

4 VAP (Value Added Plant) ONGC ( Oil and Natural Gas Corporation) Kutalam,Karaikal,

India

5 Sodium Bicromate plant Vishnu Chemicals Visakapattnam,India

6 Clean Fuel Project HPCL (Hindustan Petroleum Corporation Ltd)

Visakapattnam,India

7 RS3 to DeltaV Migration project (pulp industry) Grasim Harihar Polyfibers Harihar,Karnataka

8 RO&DM Plant (BORL)Bharat Oman Refinery Ltd BINA,MP

9 Wet Air Oxidation Plant Jubilant Organosys Limited Gajraula, Uttar Pradesh

10

Polymer Chip Plant Polyplex Corporation Kashipur,

Uttaranchal

11 Erbil Refinery KAR Group

Erbil,Kurdistan,Iraq

SUMMARY OF SKILLS (DeltaV DCS)

Responsible for Installation, Startup, Testing, Commissioning & Maintenance of DCS.

Responsible for Software Engineering & Configuration of DeltaV Digital Control Systems:-Programming & Engineering of Process Control Logics using IEC 61131 Function Blocks Diagrams and Sequential Function Charts (SFC).

System Integration of Real-Time process information using OPC (OLE for Process Control) and MODBUS Protocol from DeltaV DCS and non-DeltaV DCS.

Sytech Report Generation Software based on customer's functional specification and project documentations.

Conducting DCS Software Systems Factory Acceptance Test (FAT) - Control Narratives,Functional logics and System Integration Test with other System vendors

Conducting DCS Hardware Systems Factory Acceptance Test (FAT) - Cabinets Inspection, Controllers & Power Supplies redundant test, IO Cards channel testing,

Controller & IO Carriers inspection, Wirings & Termination Inspection, Network Interconnection & Testing.

Hands on experience in DeltaV DCS version 6.4, 7.3, 8.4, 9.3, and 10.3.

Hands on experience in DeltaV DCS and Applications Engineering.

Hands on experience in Foundation Field bus (FF) and Field devices.

Hands on Experience in DeltaV SIS (SLS 1508) Safety Instrumented System.

Hands on experience in Field bus segment design using segment design tool.

Hands on experience in HART Protocol and HART Devices.

Hands on experience in Modbus and Profibus communications.

Experience in DeltaV DCS Up gradation.

Hands on experience in Wireless transmitters and gateway configurations.

Hands on experience in AMS (Asset Management Systems).

Trouble shooting in DeltaV DCS software & hardware problems.

Hands on experience in DeltaV web servers.

Hands on Experience of Matrikon OPC products and OPC mirrors.

Implementation of process change requests for Hardware / Software changes.

Hands on experience in detailed engineering activities.Generating typical graphic elements, analyzing P&ID and assigning Animation to required components on the mimics, generating and testing Dynamo displays, trending and alarm configuration in DeltaV DCS

Dynamo displays create as per client requirement.

Hands on experience in windows XP, Server2003 and Vista operating systems.

Hands on experience in third party communication (Metering Skid,LEL Panels, Flow Computers , HMI ,Etc )

Preparations of DeltaV DCS I/O List.

Logics development based on control philosophy

Strong knowledge in Ovation DCS

1. Hardware Installation.

2. IO database Creation.

3. System Installation.

4. Application Engineering.

5. Hands-on experience in Ovation Controller OCR 400 and OCR161.

6. Hands-on experience in Ovation Version 3.2.0.

7. Ovation Hardware troubleshooting.

8. Experience in FAT procedure.

Gulf Experience – (Kuwait and Iraq)

EXPERIENCE IN BRIEF

S.No. Name of Organization Position Held Period

1 Saudi Aramco Total Refinery and Petrochemical (SATORP)

Jubail,Saudi Arabia Sr.Process Control Engineer Aug 2011 to Till date

2 ABB Global Services & Industrial Ltd,Bangalore Sr.Control Systems Engineer April 2011 to

July 2011

3 Sarla Technologies, Mumbai Sr.Control Systems Engineer July 2010 to

April 2011

4 Almeer Technical Services Co,

India & Kuwait Control Systems Engineer May 2005 to

June 2010

TRAINING UNDERGONE

Certified industrial automation and control engineer from REMOTECH ENGINEERS LIMITED, CHENNAI. Successfully completed course in PLC and SCADA from Remo tech engineers Ltd., Chennai with specialization following systems.

ALLEN BRADLEY MICROLOGIX1000.

INTELLUTION FIX SCADA SYSTEMS.

EXPERIENCE IN DETAIL

1.0 Sarla Technologies, Mumbai, India.

Working as Senior Control System Engineer responsible for DeltaV DCS related activities such as project execution, configuration and engineering services and project site support services activities for “Global Engineering Services”.

1.1 DeltaV DCS New Project scope of work at Green Field Project at Erbil Refinery (20000 BPSD), Kurdistan, Iraq. I have involved in the following activities:

End User: KAR Group.

1. Graphics and Control Modules configuration as per Documents and P&IDs.

2. Site activities –Modbus & Third party Systems communication, loop checking, Site Supporting, Commissioning Support.

3. Safety Instrumented Systems (SIS) modules commissioned and Configuration.

4. Site changes as per customer requirements.

5. System Setup and Power Up.

2.0 Almeer Technical Services Co. W.L.L. (ATSCO),Kuwait & India.

Working as Control System Engineer responsible for Control Systems (DCS) / SCADA related activities such as project execution, configuration and engineering services and project site support services activities for “System & Solution Division”.

Some of the activities and important expansion projects executed as a system engineer are as follows:

1.1 DeltaV DCS expansion scope of work at Kuwait Gathering Centers GCs 1, 3, 4, 6, 7, 8, 19 and 21 towards the Project “Corrosion and Scale Monitoring and Inhibitor Injection Package for SEK GC's DeltaV DCS Expansion Scope” at 8 GC's. Fully involved in the development of Graphics and Control Modules based on the control philosophy documents and P&IDs provided by the client. (ALMEER Technical Services CO WLL-Project, Kuwait). I have involved in the following activities:

1. Graphics and Control Modules configuration as per Documents and

P&IDs.

2. Site activities – Modbus communication established with PLC and

Configuration.

3. OPC communication, Site changes as per site requirements,

Commissioning activities.

1.2. DeltaV DCS expansion scope of works for the expansion of the integrated Process Control Systems (PCS) at site BS-170 –Kuwait, towards the Project “Installation of New Air Assisted Flare Stacks at GC’s 17, 27 & 28 and BS-170 and Installation of Liquid Separator on 24” WK Export Gas Line”. Involved in the back office engineering such as logic and graphics development and Site installation & Commissioning (ALMEER Technical Services CO WLL-Project, Kuwait). I have involved in the following activities:

1. Graphics and Control Modules configuration as per Documents

and P&IDs.

2. Site activities –Modbus & Third party, Systems Communication,

3. Site changes as per site requirements, commissioning activities.

1.3 DeltaV DCS New Project scope of work at VAP (Value Added Plant) on ONGC Site, Karaikal, Tamilnadu. (Emerson Process Management India Project) ONGC (Oil Natural Gas Corporation Ltd). I have involved in the following activities:

1. Graphics and Control Modules configuration as per Documents and

P&IDs.

2. Site activities – Field Bus Commissioning, Modbus & Third party

systems communication, loop checking.

3. OPC communication with ABB satellite SCADA, Serial communication

with Metering Skid, Commissioning in Daniel Dan load batch systems,

Site changes as per site requirements, commissioning activities.

4. Report generation using Sytech reporter.

1.4 DeltaV DCS new project Scope of works at “Sodium Bicromate” plant on Vishnu Chemicals at Vishkapatnam. (Emerson Process Management India Project) Vishnu Chemicals. I have involved in the following activities:

1. Graphics and Control Modules configuration as per Documents and

P&IDs.

2. Site activities – Field Bus Commissioning, Modbus, Profibus

Communications, and DeltaV web server Install

and commissioning, AMS database creations, AMS Software,

Wireless Transmitters Gateways configuration, Third party systems

Communication, Site changes as per site requirements,

Commissioning activities and DeltaV web server configuration.

3. Reports configuration as per client requirements (Using Sytech

Reporter through OPC)

1.5 DeltaV DCS New Project scope of works at “Clean Fuel Project “ on HPCL site ,Vishkapatnam. (Emerson Process Management India Project) HPCL (Hindustan Petroleum Corporation Ltd. I have involved in the following activities:

1. Graphics and Control Modules configuration as per Documents and

P&IDs.

2. Site activities – Field Bus Commissioning, Modbus & Third party

Systems, Communication and loop checking.

3. Site changes as per site requirements, commissioning activities.

1.6 RS3 to DeltaV Migration project in Grasim Harihar Polyfibers, Karnataka. (Emerson Process Management India Project). . I have involved in the following activities:

1. Graphics and Control Modules configuration as per Documents and

P&IDs.

2. Site activities –Modbus & Third party, systems Communication and loop checking.

3. Site changes as per site requirements, commissioning activities.

4. Conversion of RS3 logics in to DeltaV control system

1.7 DeltaV DCS New Project scope of works at “RO&DM plant “on BORL site, BINA (MP). (Emerson Process Management India Project) BORL (Bharat Oman Petroleum Ltd). I have involved in the following activities:

1. Graphics and Control Modules configuration as per Documents and

P&IDs.

2. Site activities – Field Bus Commissioning, Modbus & Third party

Systems, Communication and loop checking, Site changes as per site requirements, commissioning activities.

1.8 DeltaV DCS New Project scope of works at “Wet Air Oxidation” at Gajraula, Uttar Pradesh, Jubilant Organosys Limited – Working as a DCS Commissioning Engineer for the large scale “Commissioning of the Stage Compressor”

1. Graphics and Control Modules creation as per Documents and P&IDs.

2. Site activities – Third party systems communication, Reports etc

3. Site changes as per site requirements, commissioning activities.

4. Commissioning of Wireless field transmitters and Gateways.

1.9 DeltaV DCS New Project scope of works at “Polymer Chip Plant” at Kashipur, Uttaranchal, Polyplex Corporation – Working as a DCS Commissioning Engineer for the large scale “Commissioning of the Polymer Chip Plant”

1. Graphics and Control Modules creation as per Documents and P&IDs.

2. Site activities – Third party systems communication, Reports etc

3. Site changes as per site requirements, commissioning activities.

2.0 DeltaV DCS expansion scope of works at PBCR, KNPC (MAA Refinery), Kuwait,

Working as a Senior Control Systems Engineer for Plant commissioning.

1. OPC communication established from Allen Bradley PLC through Matrikon OPC redundancy Broker.

2. Related control modules made for AI, DI and DO signals.

3. Mimics pages development as per P&ID.

2.1 Deputed for Ovation DCS pre-FAT/FAT Activities at PWS Daman office for NTPC-Simhadri Project and JSPL – Angul for a period of Six months. The activities performed includes: System Installation, Application Engineering, Ovation Database Server and Historical Installation, power-up controllers and all panel related activities including I/Os, simulation testing and so on.

PERSONAL DETAILS

Father Name : K.Selvaraj

Date of birth : 12. 03. 1984

Sex : Male

Nationality : Indian

Passport No : G2426122

DECLARATION

I hereby declare that the above said statements are true to the best of my knowledge and belief.

VENKATESH. S



Contact this candidate