Project Engineer

Engr. Abid Javed

Current address: House No. D-*145,

Lane No. 18,Lala Rukh Colony,

Wah Cantt, Pakistan

Tele (Cell): +92-300-*******

Tele (Home): +92-51-432****

Email: ****@******.***

********@*****.***

Objective

I am quite capable of working in any company and deliver my best. I wish to work somewhere where I can groom myself further and continuously improve my technical and managerial skills.

Work Experience

I have above 3 years of practical experience in Telecom (RF) field.

Experience-I:

HUAWEI Technologies, Lahore, Pakistan (As an Outsource Employee in Netkom from Huawei)

(From October, 2009 to date) Currently Working as CDMA RF Planning and Optimization Engineer on PTCL WLL-Huawei Project in HUAWEI Technologies, Lahore

(From October, 2009 to date)

Planning:

Traffic model and propagation model tuning for better and close to real time capacity and coverage planning results.

Coverage and Capacity Planning, Network Simulation and adjustment using planning tool U-Net.

Network Parameter Planning and adjustment according to local environment.

Worked on CDMA2000 1X and EVDO Rev0&RevA Network Planning

Prepare and Submit CER (Candidate Evaluation Report) to Customer (PTCL) and check Subcontractor’s CER for valid Candidates of New Proposed Sites.

Optimization and OMC:

Network audits and output optimization proposals and plans

Single Site Drive Testing and Coverage Optimization

Cluster Optimization, Network Coverage & RF Parameters fine tuning

Traffic Statistics Analysis, KPI monitoring and Complain handling

Network Performance Optimization through soft parameters modification

Single Site and Whole Network Quality Inspection

1X and EVDO Neighbors optimization using GENEX NASTAR.

Daily & Weekly network performance test and network KPI checking and Optimization

Handling Interference, CDR, CSSR and HO related issues

Optimization and Troubleshooting of CDMA 1X and EVDO Rev A Network

RF work in O&M, handling Trouble Tickets from customer, meetings with customer and provide training to Sub-Contractors’ Engineers

Experience-II:

NETKOM Technologies, Islamabad, Pakistan

(From March, 2008 to October, 2009) I have also worked as RF Engineer on GSM Ufone-Huawei Project (Central and North) in NETKOM Technologies, Islamabad.

(From April, 2008 to October, 2009)

• Drive Test for pre-launch optimization sites using TEMS 8.0.4.

• Cluster Optimization tests, frequency scanning.

• Drive tests for on air sites diagnosing quality issues.

• Diagnosing the sector swapping issues, cross feeder issues, handover issues, call drop, mute call and call block problems, coverage issues, congestion, configuration and over shooting issues.

• Conducting TRx testing, GPRS/EDGE tests (Inter site and Intra site).

• Post Processing in MapInfo ver. 8.5 after drive test for analysis.

• Making DT Reports and Site audit reports including site configuration, antenna heights, Tilts, azimuths etc.

• Analyzing log files and forwarding recommendations to the coordinators for improving quality, level, Co-BSIC, interference issues, blockage issues, missing neighbor relations.

• Have done Optimization drive tests as per customer requirement.

• Conducting Bench marking and Re-homing tests.

• Provide troubleshooting for on-air sites.

• Providing technical assistance to teams conducting drive tests.

• Provide OMC-R Support to DT teams on sites.

• Managing teams and moving them to their target places and complete the task in given time.

• Giving basic training to newly recruited engineers.

• Working in long continuous hours and stressed environment to meet deadlines.

I have also worked on CDMA PTCL WLL-Huawei Project (AJK and Central).

• EvDO and 1X Drive Test for Pre-launch optimization sites of PTCL using Pilot Pioneer 3.6.1.33 (for AJK) and ZXPOS CNT 5.0 and Pilot Panorama (for Central).

• Post Processing in Pilot Navigator 2.9.6.3 (for AJK) and ZXPOS CNA 7.0 (for Central) after EvDO drive test for analysis.

PROFESSIONAL TRAININGS

1. CDMA RF Training in HUAWEI Office, Lahore, Pakistan

2. Advanced Training for CDMA RF in Huawei Office, Islamabad, Pakistan

3. WiMAX RF Training in Huawei Office, Islamabad, Pakistan

4. GSM RF Training in Huawei Office Lahore, Pakistan

5. GSM BSS Basic Training in Huawei Office Lahore, Pakistan

6. WCDMA RF Training in Huawei Office, Islamabad, Pakistan

7. CDMA EVDO Rev.A and Rev.B RF Training in HUAWEI Office, Lahore, Pakistan

Professional Tools Used

• HUAWEI AirBridge/LMT V9R1 (FOR GSM BSC6000)

• HUAWEI AirBridge/LMT V2R6 & V2R3 (For CDMA BSC6600)

• HUAWEI AirBridge/LMT V3R7 (For CDMA BSC6680)

• iManager M2000 (For GSM and CDMA)

• GENEX NASTAR (For CDMA Optimization)

• U-Net 2.2.1 (For CDMA Planning)

• TEMS 8.0.4 (For GSM DT)

• MapInfo 8.5 (For Post Processing)

• Pilot Pioneer 3.6.1.33 (For CDMA 1X and EVDO Rev.A DT)

• Pilot Pioneer 4.1.0.1 (For CDMA 1X and EVDO Rev.B DT)

• Pilot Navigator 2.9.6.3 (For CDMA Post Processing)

• Pilot Panorama 6.0 (For CDMA)

• ZXPOS CNT1 5.0 (For CDMA 1X and EVDO Rev.A)

• ZXPOS CNA1 7.0 (For CDMA Post Processing)

• QXDM (For EVDO Rev.A and Rev.B DT)

Education

BSc Computer Engineering

(1st Division)

(2003-2007) COMSATS Institute of Information Technology

Wah Cantt, Pakistan (PEC Registration No: COMP/4715)

Major Subjects Wireless Communication, Digital Communication, Data Communication and Networking, Electric Circuit Analysis ( I & II ), Digital Logic Design, Electronics Devices ( I & II ), Signals and Systems, Microprocessor Systems and Interfacing, Digital Signal Processing, Control Engineering, Digital Image Processing, Advanced Computer Architecture, Real Time Embedded Systems, Systems on Chip, C/C++, Object Oriented Programming, Data Structures, System Programming, Operating Systems, Databases

FSC (Pre-Engineering)

(1st Division)

(2002) POF Science Degree College, Wah Cantt, Pakistan

Matriculation

(1st Division)

(2000) IQRA Public School, Wah Cantt, Pakistan

Final Year Project

Wireless ECG Telemetry SYSTEM using Zigbee Transceiver and Microcontroller 8051.

We developed an ECG Telemetry system that has three major portions.

1. ECG Analog Signal Acquisition

2. Wireless transmission of ECG Signal

3. Graphical User Interface

First we acquire ECG signal of a human body through Sensors and diodes.

The signal is in analog form, first we convert it into digital form through Assembly code using Microcontroller 8051. Then microchip 89C51RD2 is interfaced with Zigbee IC of MC13192. Zigbee Transmitter transmits the signal. On the other hand, another Zigbee Receiver is attached to a computer within 200 meter range which receives the wireless ECG signal and sends it to computer through serial port. Computer stores the received signal. The wireless range of Zigbee Transceiver is 200 meter.

In computer, we designed a Graphical User Interface (GUI) using MAT Lab that displays the ECG Signal.

Academic Experience

Skills and Semester Projects

• Competent with C/C++, Data structures, Assembly Language, Databases, SQL, Networking, Microsoft Project, Microcontrollers 8051, PLCs, Keil, OrCAD, MATLAB, DCS Kits and all Microsoft Office applications.

• Expert in all types of computer hardware and software maintenance & installation including all Microsoft Windows installations.

• Design Students Records Software in C++ for IQRA Model School, Wah Cantt.

• Traffic Control System using PLC programmer. (Semester Project)

• Automation of POF Entrance System (Semester Project related to Software Engineering)

• Security Alarm using Infrared transmitter and receiver. ( Semester

Project)

• Databases for Library System using MS Access. (Semester Project)

• Serial and parallel port communication. (Semester Project)

• On board simple computer using Microcontrollers 8051. ( Semester Project)

• Attend Seminar on Software Defined Radio (SDR).

Personal Bio Data

Name Abid Javed

Father Name Afzal Javed

D.O.B 07-06-1983

Gender Male

CNIC No. 37406-0213418-5

Passport No. BW8674181

Marital Status Single

Nationality Pakistani

Reference

Will be furnished upon request.

Contact this candidate