Sr. Design Engineer
Resume:
WILLIAM M. MONAGHAN
**** ***** **. *********. **, 48125
*************@*****.***
QUALIFICATIONS:
• Over twenty eight years of diversified experience in the Product Engineering and Design profession, Automotive, Commercial, Utility and Military Vehicle Design, Over 6000 hrs of recent CATIA V5 experience, Chassis, body in white and suspension.
Exterior mirror systems, Seating systems, Interior trim, safety restraints, exterior lighting, climate control ducts, tubing and hoses. Also knowledge of die-castings, injection moldings, Glass systems, sheet metal stampings, forgings, safety mechanisms, and climate control operation. Well experienced in processing a design from scanned data through final production.
CAD EXPERIENCE:
• Solid Works 2009 : Design/detailing, data management, Part Design , Assembly Design and Surfacing
• CATIA V4 and V5: Design/detailing, data management, Part Design GSD, Assembly Design, Product Structure Surfacing, and Solid Modeling.
• P.D.G.S.: Design/detailing, formatting, data management, 3D-wire frame, surfacing and solid modeling.
• Intergraph/EMS: Design/detailing, 3D-wire frame, surfacing and solid modeling.
EDUCATION / TRAINING:
• Center for Professional Studies:
Catia V5 training: Data management 2D, 3D surfing and solid modeling. 80hrs Completion date 08/15/02
• Oakland Community College: Completed Associates Degree in 1998. Courses included CAD/CAM CATIA V3 Rev 3.2 (3D Wire Frame, Facing, Surfacing and Solids, Advanced Curves and Surfaces), AutoCAD Version 13.0 Technical Drafting and Computer Programming.
• Marisa Industries, Rochester Hills, MI Certificate of Technical Training, Sept 1998, CATIA Version 4.19 Exact Solids and Primary Surfacing. 80 Hours
• International Technical Institute, Troy, MI. Certificate of Technical Training, March 1993 Data management and wire frame development surface creation 2D and 3D detailing and drawing functions Basic P.D.G.S. Design 80 Hours
• Institute for Engineering & Design Inc, Hendersonville, TN Certificate in Fundamentals of Geometric Dimensioning & Tolerancing, April 1995 Course Instructor: James D. Meadows (President of ANSI Committee). 80 Hours
• H. L. Bosca School of Automotive Body Design, St. Clair Shores, MI Layout of surface development, G.P.A. 4.0. 9 months.
• Lake Orion High School, Lake Orion, MI: Graduated, 1980 Courses in technical drafting.
PROFESSIONAL EXPERIENCE
• Right Angle Staffing, December2009 (2 week Contract). Design Engineer, Catia V5 Rev 18 Modeling of F-15A bulkheads
• Force Protection, April 2009 to May 2009 (3 week Contract). Design Engineer, Solid Works 2009, Detail of storage cabinets Cougar. Worked for Kazem Hodroge, section leader.
• American LaFrance LLC, June 2008 to April 2009 (Contract). Development Engineer for all mobile climate control. CATIA V5 Rev 16, 17 and SolidWorks 2008 & 2009, TeamCenter, BOM’s and sales charts. Responsible for all climate control issues, from assembly line to initial development, through production for Emergency, Vocational, and Military vehicles.
• AGC-Automotive, February 2008 to May 2008 (Temporary). Design Engineer CATIA V5 Rev 16 and 17 Responsible for initial development, packaging of rear fixed window incapsulation for Honda and Toyota Vehicles.
• EASI Engineering, November 2007 to December 2007 (Temporary). Design Engineer CATIA V5 Rev 16 UNIX, responsible for initial development, packaging of Seat Trim for F150, Surfacing of fuel cell development separator.
• ABC Group Plastics, June 2007 to October2007. Design/Release Eng (Temporary) CATIA V5 Rev 16: UNIX, Team Center, Responsible for initial development, packaging of I/P ducts, Console ducts and Defroster Nozzles on Chrysler Products.
• VOLVO NORTH AMERICAN TRUCK, August 2006 to June 2007. Design/Release Engineer CATIA V5 Rev 15 and 16 ENOVIA, Data Migration from V4 to V5. On-site Greensboro NC, responsible for initial development, packaging, and release of HVAC systems for VOLVO VNM, VNL, VHD Platforms and MACK, CXN, CHN, AND CTF Platforms.
• MARK IV PLASTICS, April 2006 to June 2006 (Temporary). Senior Designer CATIA V5 Rev. 14 and CATIA V4 Rev. 2.5 Design of Injection Molded Intake Manifold for Chrysler Hybrid. Responsible for initial development and under hood packaging.
• MAGNA DONNELLY, October 2003 to December 2005. Lead Design/Release Engineer CATIA V4 Rev. 2.5 CATIA V5 Rev 15, Data Migration from V4 to V5, and VPM On-site representative responsible for initial development, exterior electronics packaging and release of exterior mirror systems for CS, RT, JC-49, KK, KA and DR DCX vehicles. Worked with Electronics, System Integration, Aero, NVH, Design Studio, Advanced Vehicle Engineering, Interior Trim, Door Structures, and Body Sealing Engineering.
• INTIER AUTOMOTIVE, April 2002 to October 2003 Senior Designer. Catia V 4 Release 2.4 Design of seating systems including foam pads surfaces, A&B side development, plastic seat trim, and mechanisms for RS and Pacifica DCX
Programs.
• COLLINS & AIKMAN, September 1999 to April 2002 Senior Designer. Catia V 4 Release 2.4 Design & Engineering of carpet and acoustics on CATIA 4.23 VPM Data Manager. Project Engineer and Design Eng. for MBUSI “M” –
Class. Design Engineer for Chrysler JR-27, JR-41 and All LH platforms.
• GLOBAL TECHNOLOGIES, February 1999 to September 1999 Valeo Inc. Senior Designer. Design of wiper systems for BMW and General Motors vehicles CATIA 4.20.
•MARISA INDUSTRIES, June 1998 to February 1999 Valeo Inc. Senior Designer. Design of engine coolant components using CATIA 4.19 (Solid Modeling) for Chrysler RS 2001.
• LIVERNOIS ENGINEERING, September 1994 to June 1998 Ford Motor Class "A" Designer. Design and detail of air conditioning routing and heater hoses using PDGS.
• L & L PRODUCTS INC, April 1993 to September 1994 Senior Designer. Sheet metal body structure, sealant, and structural enhancement for all Chrysler and Ford products using CATIA 4.19 / PDGS.
• GENERAL SAFETY INC, August 1991 to January 1993 Design Engineer. Design of safety restraint mechanisms using Intergraph VT220 for General Motors and Ford products.
• MEGATECH INC, June 1989 to August 1991 Senior Designer. Design of 1992 General Motors C P C interiors; J, N and K body interiors, design of interior trim for all Jeep vehicles and Dodge trucks, and design of dash panel for Jeep Cherokee.
• TROY DESIGN INC. February 1987 to June 1989 Designer. General Motors B.O.C. H. and C. platforms.
Senior Designer. Design of exterior lighting for Buick and Catallic vehicles, Design of Buick B.I.W., chassis, and body electrical.
Senior Designer. Design of 1990 -1992 Corvette Interiors for C P C Engineering.
• AERO DETROIT, June 1986 to February 1986 Designer. Created electrical layouts for Chrysler Corp. A, C, and Y body cars.
• MODERN ENGINEERING SERVICE COMPANY, March 1986 to June 1986 Junior Designer. Design of HVAC systems and G D & T study for GM B O C.
• ENTECH LTD, February 1985 to March 1986 Layout. Layout of interior components for CPC, suspension, chassis, and related
components.
• PIONEER ENGINEERING AND MANUFACTURING INC, May 1983 to February 1985. Detailer on military vehicles (XK1 tank) for General Dynamics.
Contact this candidate