qc welding inspector
Resume:
RESUME
S. SENTHIL KUMAR **/A North pookara street,
Email: ***********@*****.*** Thanjavur-613001,
Tamil Nadu, India.
AWS –CERTIFIED WELDING INSPECTOR Mobile: +919********* begin_of_the_skype_highlighting +919********* end_of_the_skype_highlighting
[No: 08093281] Phone: 04362 – 647263
OBJECTIVE:
As an INSPECTION AND QUALITY CONTROL ENGINEER would like to take up a challenging assignment such that it will prove my TECHINICAL AND ACADEMIC SKILLS.
AWS –Certified welding inspector (CWI) [08093281]
ASNT Level II in UT, RT, MT, VT & PT
Diploma in autocad
AREAS OF INTEREST:
Welding inspections.
Painting inspections.
Fit-up Inspections.
WORK EXPERIENECE:
BACHELOR OF ENGINEERING WITH SIX (8) YEARS IN OIL & GAS REFINERY CONSTRUCTION WORKS.
(INLAND – 4 YEARS OVERSEARS – 4 YEARS)
1 . CIYODA TECHNIP JOINT VENTURE [Oct 2008 – may 2010]
Designation : QA/QC PIPING WELDING INSPECTOR
Client : Qatar Gas
Job profile
• Review the drawings and specifications for all the welding, NDT, Heat treatment, Testing, surface preparation and painting requirements before carrying out the job.
• Preparation of Quality Plan(QP)
• Ensure that the relevant raw materials including welding consumables, paints comply with specified requirements of Codes and Standards.
• Preparation, establishment and control of welding procedure specifications and procedure qualification records.
• Witness procedure qualification tests & welder qualification tests in association with the customer /Third party inspector.
• Monitor the storage, backing, holding of low hydrogen electrodes and handling of welding consumables.
• Conducting in process welding related inspection such as fit up, ball test for confirmation of excess penetration, preheat check, visual inspection, and ensure the welder is qualified for that job and using the applicable WPS.
• Ensure that welding parameters are as per approved welding procedure and the welding machines are calibrated.
• Involved in Scheduling and monitoring PWHT of weld joints and review of heat treatment chart.
• Witnessing the Ultrasonic testing, Magnetic Particle testing and Penetrant testing
• Review of Radiographic Test reports, Magnetic particle test reports, Ultrasonic test reports, Liquid Penetrant test reports and hardness test reports.
• Witnessing hydrostatic and pneumatic tests and performing final inspection for acceptance.
• Performing the visual inspection on surface preparation such as sand blasting
• Ensure that the painting/Coating on components comply with required technical specifications.
Coordinating with third party inspection agency and ensuring the final clearance
BLUE STEEL INDUSTRY – DUBAI [Jan 2007 ~ april 2008]
Designation : INSPECTION ENGINEER
Job profile
• Raw material inspection – Material identification, Delivery order and Mill certificate verifications.
• Mock up inspections ¬ - Build mockup of architecturally exposed structural steel to set quality standards for fabrications and installations.
• Review WPS , Witness welding Inspection ,Prepare PQR and WPS ,Mechanical Test
• Organize the work according to the requirements and procedures.
• Inspection of filed weld and high strength bolted (HSFG) connections.
• Non Destructive testing – Ultrasonic testing, Dye penetrate and Magnetic particle testing
• Painting inspection - Surface preparation of Blasting, film thickness, pull off test, and various stages inspection like primer, second coat and top coat.
AE AUTOMATION-INDONESIA [Jan 2007 - Dec 2007]
Designation : QA/QC Engineer
Job profile
• Review the drawings and specifications for all the welding, NDT, Heat treatment, Testing, surface preparation and painting requirements before carrying out the job.
• Preparation of Quality Plan(QP)
• Ensure that the relevant raw materials including welding consumables, paints comply with specified requirements of Codes and Standards.
• Preparation, establishment and control of welding procedure specifications and procedure qualification records.
• Witness procedure qualification tests & welder qualification tests in association with the customer /Third party inspector.
• Monitor the storage, backing, holding of low hydrogen electrodes and handling of welding consumables.
• Conducting in process welding related inspection such as fit up, ball test for confirmation of excess penetration, preheat check, visual inspection, and ensure the welder is qualified for that job and using the applicable WPS.
• Ensure that welding parameters are as per approved welding procedure and the welding machines are calibrated.
• Involved in Scheduling and monitoring PWHT of weld joints and review of heat treatment chart.
• Witnessing the Ultrasonic testing, Magnetic Particle testing and Penetrant testing
• Review of Radiographic Test reports, Magnetic particle test reports, Ultrasonic test reports, Liquid Penetrant test reports and hardness test reports.
• Witnessing hydrostatic and pneumatic tests and performing final inspection for acceptance.
• Performing the visual inspection on surface preparation such as sand blasting
• Ensure that the painting/Coating on components comply with required technical specifications.
Coordinating with third party inspection agency and ensuring the final clearance
EICS – Chennai [July 2002 - Dec 2006]
Designation : QA/QC Engineer
Job profile
Review of drawings and specifications
• Preparation of Inspection & Testing Plan and Welding Procedure Specification.
• Witnessing of Procedure Qualification Test and Welder Qualification Test.
• Preparation/Maintaining of QA/QC documents.
• Welding Sequence & Erection, Hydro test Procedure, Test Pack and retrieval as required.
• Vendor Assessment and Inspection of materials, correlation of mill certificates, dimensional checks, condition of materials, documenting and reporting of non-conformity (if any) to specifications.
• Inspection of welding consumables and equipments, checking of storage and baking of electrodes, verifying all welding parameters according to approved WPS.
• Verifying and maintaining calibration records for inspection measuring and test equipments
• Inspection on Welding such as checking of joint fit-ups, seam orientation, pipe no., Heat no., alignment, visual inspection & numbering.
• Review of NDT reports and acceptance as per standards.
• Dimensional check of all components & structures as per approved drawings.
• Witnessing of Hydro test & Pneumatic test of Piping and Vessel.
KNOWLEDGE IN
Preparation of I.T.P.’s, Inspection formats, Construction Work Procedures.
Involved in Preparation of W.P.S., P.Q.R., and W.P.Q.
Study of Plant Plot Plan, P & ID, Isometric Drawings.
Co-ordination with Vendor for static, rotating and packaging items of Gas and oil refinery.
Co-ordination with Central Pipe Fabrication Shop for releasing of fabricated spools to site.
Preparation of Three (3) months and Three (3) weeks planning for execution of works.
Co-ordination and organization of the sub-contractor’s Manpower, Machineries and Materials.
Piping Materials Identification.
Stagewise Inspection in Stagewise Fabrication of Tanks and Pipings.
Stagewise N.D.E. Inspection like RT, MT, PT.
Preparation of Hydrotest Packages.
Clearance of Hydrotest Packages like Punch list (A, B, C Punches)
Hydrotest and Pneumatic Test Witness.
Inspection of Hot and Cold Insulation.
Inspection of Sand Blasting, Grid Blasting & Paintings and etc.,
Code Reference API 1104
ASME SEC V
ASME SEC VIII
ASME SEC IX
ASME B 31.3
PERSONAL DETAILS
Name : S.SENTHIL KUMAR
Father Name : M.SUBAIYAN
Martial Status : Single
Languages Known : Tamil, English.
Permanent Address : 23/A, North Pookara Street,
Thanjavur - 613001.
Professional Qualification : B.E. Mechanical Engineering in Bharathidasan University,
Trichy, Tamil Nadu.
Year of Completion : April 2002
Declaration
I hereby declare that the Particulars mentioned above are true to my knowledge and no change will be demanded by me in the future.
Date: [S. SENTHIL KUMAR]
Place:
Contact this candidate