Maintenance Technician
Resume:
MILES E. DAVIS RESUME OF QUALIFICATIONS
Mansfield, Texas 76063
PROFILE
Provide supervision to 16 collective bargaining machine repair mechanics, machine electronic technicians, machine repair electricians, and oilers in the troubleshooting, repair and preventative maintenance of Conventional, NC, and CNC machines, ultrasonics, Par Drill and Trim Robot, Par Water jet Robot, High Speed Cells with Makino A99 and Mag3 along with the shuttle pallet systems and shuttle turntable system, Mazak, Hurcos, K&T’s, Hydrotel, High Speed Handtmann Spar Mill, Cincinnati ATLM tape layer, Gerbers, Haas, Cnc routers, Cyril Press, Lake Erie Presses, Cnc drivematics, conventional and Cnc Lathes, autoclaves, Paint Booths, and various types of ovens etc. Also gave direction on which machines to repair according to whether it was a critical machine or not and whether it was trouble call tickets, planned repair tickets, preventative maintenance tickets or safety tickets and decided which craft was responsible for that task. Responsible for the compliance of the maintenance operating system in support of the overall Vought operating system, which consisted of maintaining and updating the metrics to show schedule attainment, Preventive Maintenance completion, unavailable/available hours, machine downtime percentages, Osha recordable, Overtime percentages and totals. I also kept up with the training schedule and training requirements of my employees. Responsible for reaching individual goals to help meet facility and company goals. I had daily shop meetings to give work assignments and discuss special projects and shop schedule attainment, metrics, process improvement issues, safety issues, and facility issues. Responsible for machine inventory and part orders for machine repairs. Also performed the weekly and daily planning and scheduling for 1st and 2nd shift maintenance personnel. Helped maintain continuous process improvement procedures through Six Sigma Management practices. Attended various production meetings on their program schedules and worked closely with them on their production machining schedules, trending charts and graphs to schedule our preventative maintenance and planned repairs for machines.
Proficient in the scheduling and planning of Maintenance mechanics, machinist, electricians, electronic technicians, General Mechanics, and oilers, daily work scheduled of plan repair, trouble calls, and preventive maintenance work orders, relative to production schedules and by critical machine. Also created Preventive Maintenance procedures for the facilities, critical machines and new machines and negotiated with production on the release of machines for Preventive Maintenance procedures. Maintained and updated the metrics to show schedule attainment, Preventive Maintenance completions, unavailable/available hours, machine downtime percentages and totals. Completed work orders and purged backlogs of old and obsolete tickets. Interacted with vendors on facility and machine repairs and parts. Attended production meetings and filled in for Supervisors during their absences.
Broad experience in inspecting, troubleshooting, and repairing drivmatic machines, hydraulic and pneumatic equipment and their peripherals. Solved assembly problems caused by tooling, cutter and machine malfunctions. Also dealt with assembly problems such as chips, FOD, fastener types etc. Also inspected, troubleshot, calibrated and repaired environmental control systems, electrical and electronic components, NC and CNC computer numerical control equipment, servo valves, servo drives, servo motors and the parts and machine programs to operate them efficiently.
PC literate, and knowledgeable in the installation, maintenance, programming, and set-up of Programmable Logic Controller PLC 2, PLC 5 and SLC 500 using RSLogix5, RSLogix500, DOS based ICOM and A.I. software. Also used PC based cimutil and cimsys software too operate, align and diagnose robot problems. Knowledge of word, excel and PowerPoint.
A strong mechanical aptitude, with the ability to diagnose and repair most machines and equipment by utilization of schematic diagrams, technical orders, blue prints, maintenance manuals, and instruction manuals.
MILES E. DAVIS Page 2
PROFILE CON’T…
Proficient in the use of multimeters, ammeters, manifold gage sets, oscilloscopes, protective relay test sets, phase meters, and all small hand tools, and industrial shop equipment.
A high degree of leadership abilities supervised daily operations upon the regular Supervisors absence. I have the ability to communicate, train and instruct personnel by giving clear direction, offering technical support, and by providing the motivation to perform and expand upon their knowledge and grow professionally.
Proficient in use of MIMS (Maintenance Information Management System), QMF (Query Management Facility), Dacol timekeeping and SAP inventory system.
EMPLOYMENT
05/2008-05/2010
Maintenance Supervisor 1, VOUGHT AIRCRAFT CORPORATION, Dallas, Texas
Supervision of collective bargaining maintenance mechanics, electricians and electronic technicians in repair of various types of high speed 5 axis machines and conventional machines used in production and testing of aircraft assemblies for the military and commercial aircraft manufacturers. Responsible for everyday coordination of scheduled work according to production schedules. Also responsible for compliance of safety rules and regulations and training. Responsible for Preventative Maintenance programs and Total Predictive Maintenance on all critical Machines and non-critical machines.
05/2007–05/2008
Project Coordinator 3, VOUGHT AIRCRAFT CORPORATION, Dallas, Texas
Scheduling, Planning, and maintaining work orders, preventive maintenance procedures, and metrics for the facility buildings and grounds dept. responsible for everyday building and grounds maintenance productivity. Also worked as acting supervisor periodically. Responsible for research and getting quotes on capital projects and equipment and issuing Appropriation Request for funding. Also responsible for overseeing contractors on certain projects. Also checked out trouble calls to see what craft is needed and prioritize the jobs. Responsible for Facility repairs from our landlord (the Navy).
05/2006-05/2007
Electronic Technician, VOUGHT AIRCRAFT CORPORATION, Stuart, Florida
Troubleshoot, repair, inspect and diagnose CNC computer numerical control equipment, programs and their peripherals.
Utilized laptop computer, Allen Bradley Hand Held Interface and PC to troubleshoot, modify and program PLC 5 and SLC 500.Used GE Fanuc 15-M to operate and troubleshoot 5 axis positioner. Used PC and Allen Bradley panel view interface to calibrate and diagnose vision system problems and to operate and diagnose machine problems.
Troubleshoot, repair and diagnose Allen Bradley 7300 NC Controller and its program problems. Used AB7300 diagnostic program to diagnose 5 axis positioner problems.
Troubleshoot, inspect and calibrate PAR robot using cimsys and cimutil software.
05/2005 – 05/2006
Project Coordinator 3, VOUGHT AIRCRAFT CORPORATION, Dallas, Texas
Scheduling, Planning and creating and maintaining all work orders, preventive maintenance procedures, and metrics for the facility machine maintenance and equipment department. Perform machine reliability calculations to predict and
MILES E. DAVIS PAGE 3
EMPLOYMENT HISTORY CON’T…
prevent possible catastrophic failures and alert repeat problems for corrective action using metrics totals and graphs.
02/2001-05/2005
Electronic Technician, VOUGHT AIRCRAFT CORPORATION, Stuart, Florida
Troubleshoot, repair, inspect and diagnose CNC computer numerical control equipment, programs and their peripherals.
Troubleshoot, repair, and service Videojet Inkjet Print Machines.
Utilized laptop computer, Allen Bradley Hand Held Interface and PC to troubleshoot, modify and program PLC 5 and SLC 500.Used GE Fanuc 15-M to operate and troubleshoot 5 axis positioner. Used PC and Allen
Bradley panel view interface to calibrate and diagnose vision system problems and to operate and diagnose machine problems.
Troubleshoot, repair and diagnose Allen Bradley 7300 NC Controller and its program problems. Used AB7300 diagnostic program to diagnose 5 axis positioner problems.
Troubleshoot, inspect and calibrate PAR robot using cimsys and cimutil software.
05/1991-02/2001
SR. Drivematic Maintenance Mechanic, NORTHROP CORPORATION, Perry, Georgia
Troubleshoot, repair, rebuild, service and diagnose electrical, electronic, hydraulic and pneumatic system's valves, cylinders, pumps, and controls etc.
Utilizes Allen Bradley lap top computer with ICOM software for Ladder Logic Programming, Troubleshooting, and diagnosing of machine programming and operation problems.
Install, maintain, set-up, and troubleshoot PLC5, PLC2, and SLC500 programmable controllers.
Troubleshoot, inspect and maintain the monorail system and its PLC2 programmable controller.
Worked with production on Quality issues of parts run on machines to find a fix, whether it was tooling, hardware, machine malfunctions, or operator errors.
Leader of my team for The Total Quality Management System, process improvement methodology.
07/1995-08/1997
Equipment Technician (part time), FRITO-LAY, Kathleen, Georgia
Repaired high speed production machines such as conveyors, ovens, peelers, fryers, etc...
01/1988-05/1991
Assistant Manufacturing Associate, McDONNELL DOUGLAS CORPORATION, Macon, Georgia
Maintained, repaired, inspected, and serviced drivmatic machines, hydraulics, pneumatics, electrical and electronics components.
Utilized Toshiba 3100 laptop computer to interface with Allen Bradley PLC2 programmable controller in examining and modifying ladder logic programs for drivmatic machines.
By the use of the PLC, was able to isolate a problem to certain areas or determine if the malfunction was electrical or mechanical or a program problem.
Utilized mechanical aptitude and expertise to make various facility repairs.
01/1985-01/1988
Service Technician, HOBART CORPORATION, Macon, Georgia
MILES E. DAVIS PAGE 4
EMPLOYMENT HISTORY CON’T…
Proficiently utilized small hand tools in inspection, service, and repair of food equipment (saws, grinders, slicers, cubers, scales, printers, labelers,
electronic scale wrappers, etc...) for restaurants, schools, hospitals, and grocery stores.
Programmed and set-up computer scales and labeling systems by setting up Dip switch positions on logic and interface boards and adding correct proms and rams
on memory boards. Replaced boards, load cells, print heads, ribbons and other peripheral parts of scale, labeling and wrapper systems.
Downloaded and uploaded store program by use of a tape reader machine. Also made changes to programs according too customers needs and troubleshooting by going into the diagnostic program of the machines.
Replaced Proms, Rams, boards, printheads, and other parts to repair and maintain equipment.
06/1983-01/1985
Cable Plow Burier, Wright and Lopez Inc., Forest Park, Georgia
Operated cable plow in burying service wires and cable for commercial and residential telephone and cable services.
06/1979-06/1981
UNITED STATES AIR FORCE
Telecommunications Operator, Robins AFB, Warner Robins, Georgia
Operated Teletype, DSTE digital subscriber terminal equipment, crypto equipment, and Univac 9000 optical character computer to send, receive, and correct incoming and outgoing classified messages.
Operated base telephone switchboard when necessary.
TOP SECRET SECURITY CLEARANCE.
07/1975-06/1979
Missile Facility Technician, Malmstrom AFB, Montana
Serviced, troubleshot, and repaired environmental control systems, refrigerant subsystems, instrument air subsystems, facility heating and ventilation subsystems and associated refrigeration system components.
Were trained in soldering techniques, such as silver and soft soldering of copper and electrical wiring, tubing maintenance such as flaring, swaging, identifying copper tubing, and types of refrigerant fittings.
As Team Chief, I worked and supervised a various number of technicians in all the repair and maintenance of 150 minuteman missile silos in repairing and maintaining the power generation and distribution systems, environmental control systems, diesel generators, automatic switching units, and lighting systems.
TOP SECRET SECURITY CLEARANCE.
MILITARY TRAINING
Air Conditioning & Refrigeration, Industrial Electricity, Electronics, Power Distribution & Generation, Diesel Mechanics, CPR, Telecommunications Operation, Professional Military Education & Supervisory Training, Chanute Technical, Chanute AFB, Illinois.
EDUCATION / TRAINING
PC based RSLogix 5 and 500 maintenance and troubleshooting software, SLC 500 Intro to Programming w/ICOM software; PLC 5 Programming with ICOM software; Developing
MILES E. DAVIS PAGE 5
EDUCATION / TRAINING CONT...
Control View Applications for PLC 5; Certificate, PLC 5 Maintenance and Troubleshooting Course, SPC Statistical Process Control, Sponsored by Northrop Corporation; Structures Mechanic Course, Drivmatic Operator Course, Drivmatic Maintenance (hydraulics, pneumatics, Allen Bradley PLC 2/05, Huck Tooling Maintenance, TQMS (Total Quality Management System), sponsored by McDonnell
Douglas; Electronic Scale Wrapper Course, 5000 Computer Labeling System, Commercial Dishwasher Course, 3000 Computer Labeling System, Video Tape Course 1860/18VP Computer Scale and Printer, Basic Electronics/Electricity Video Tape Course, Sponsored by Hobart Corporation; Air Conditioning & Refrigeration, Industrial Electricity, Macon Area Vocational School, Macon, Georgia; General Studies, Basic Electronics, Sheet Metal, Monmouth Regional High School, General Studies, Welding, Liberty High School, Clarksburg, West Virginia. Six Sigma yellow belt training, Vought Aircraft, Dallas, Texas.
AWARDS
Total Quality Management System Recognition Certificate for Team of Quarter and Team of Year 1993; Recognizing Excellence through People Certificate; Good
Conduct; Serviceman Longevity Award, Marksmanship Ribbon; Master Technician; Air Force Outstanding Unit Award with 1 Device. Six Sigma Yellow Belt Certificate.
Contact this candidate