Construction Project Manager

CURRICULUM VITAE

Name : RONNIE I. CAINDOC

Address : ** - * ********** **. ******* Bicutan, Taguig City 1630, Philippines

Date of Birth : July 21, 1975

Birth Place : Quezon City

Height : 5 feet 4 inches

Weight : 120 lbs.

Civil Status : Married

Contact No. : Home (00-63-2-549****) / Mobile No. (006***********)

Passport No. : EB0563417

SSS No. : 33-1915826-8

TIN No. : 919-117-992

Trainings and Certifications:

• PCN UT LEVEL 2 (CAT. 3.1 PLATE)

• ASNT UT LEVEL II (T,K, and Y)

• ASNT UT LEVEL II (pipe and plate all-configuration)

• ASNT DPT LEVEL II

• ASNT RT (X-RAY and GAMMA RAY)

• ASNT MT LEVEL II

• RADIOLOGICAL HEALTH and SAFETY OFFICER

Work Summary:

Worked as PCN Cat. 3.1 (plate) and ASNT NDT Multi-Discipline Technician Level II from since 1995

up to the present, trained and been qualified to test various joint configurations. Capable to perform

various Radiographic inspection using X-ray and Gamma ray. Able to do Ultrasonic inspection on joints

with different material characteristics. Also been qualified to do OCTG inspection for drilling tools.

Involved also for UT Tandem technique procedure qualification and inspection and welding flaw

detection using O degree probes. From the time started as NDT level II job is continuous and with

great deal of interest to explore knowledge and experience.

Work Experiences:

Employer : OCEANEERING INTERNATIONAL

Duration : From year 2007 up to the present

Position : ASNT NDT Level II (Multi-Discipline), PCN Cat. 3.1 (Plate)

Project Location : SONAMET Lobito Fabrication Yard

(Lobito, Angola, Africa)

Duties and Responsibilities:

As a part of Oceaneering Inspection team based in Sonamet Fabrication Yard my job is to:

• Assure the quality of welds as per Client’ specification and procedure:

Have the equipments properly calibrated; double check the joint details on fabrication drawings,

make a plotting drawing to investigate the nature of the indications; and to carefully understand

the acceptance criteria so that every decision to make are firm.

• When doing Radiographic Inspection :

Make sure that the safety is properly administered according to Radiation Safety Standards;

Conduct physical checks on equipments before and after inspection; perform radiation

monitoring; and to install necessary safety warning devices so that unwanted exposure will be

prevented.

Familiar with the following jobs:

• UT shear wave of welds T, K, and Y (pipes & plates)

• UT Lamination checks

• UT Thickness measurements

• RT of pipes (small to big bore)

• RT Thickness measurements

• MPI and DPT of welds (visible and fluorescent)

Lists of projects that I have worked with:

FMC / PAZFLOR BP / MODEC

• Structural • Structural

• Piping • Piping

• Piles • Piles

DSME / PAZFLOR ACERGY (DEEP WATER STINGER)

• Boat Landing • Structural

• Mooring Protection • Piping

ACERGY / EXXON CHEVRON MAFUMEIRA

(GAS-GATHERING BLOCK. 15) • Jackets

• PLEM Structure • Piles

• PILES • Deck Structure

• FLowline Crossing Main Deck

• Trawling Protection and Supports Cellar Deck

• Mud Mats Sub Cellar Deck

• Counter Weights Heli-Deck

• Double Joints • Piping

• Buoyancy Tanks Process and Production Line

• PLTG’s Piping

KIZOMBA C (SAXI & BATUQUE) KIZOMBA C (MONDO)

• Chaintable • Chaintable

• Gantry Structure • Gantry Structure

• Manifold Structure • Manifold Structure

• BPM & SPM 6 SLOT Production

• BWM 1 & 2 WI Piping & Structure • Common Guides

KIZOMBA C (SAXI & BATUQUE) KIZOMBA C (MONDO)

• Pigging Loop • LB & SB Piping

• SWM 1 & 2 DC1 to 3

• LB & SB Piping 6SPM

BPM 1 & 2 PL1 +2+3

SPM 1 & 2 Water Injection

SWM 1 & 2 • Manifolds

• Mud mats DC1 to DC2 (PROD. & WAG)

TOMBUA LANDANA

• Barge Bumper • Production Manifold

• Boat Landing LB & SB Piping

• Drilling Template • Spools

• Flare Boom • Spreader Bars

• Injection Manifold Foundation • Water Injection Manifold and Structure

• Jumpers

• Mud Mats

CHEVRON TAKULA KIZOMBA C

• Jacket and Piles • Turntable

• Flare Boom Structure and Piping • Turret

ACERGY/ BP (GREATER PLUTONIO) VETCO GRAY

• Guide Frames • Production Manifolds

• Riser Tower Spools MONDO 4 SLOT and SAP

• Process Lines

• Piles

• Counter Weight

• Manifolds

• Structure & Piping

Employer : ACE TUBULAR SERVICES LTD. (BATAM, INDONESIA) From year 2003 to 2006

Duration : ASNT NDT Level II INSPECTOR (OCTG) Project Site Coordinator

Position : PNOC (Philippine National Oil Company)

Project Location : PGI (Philippine Geothermal INC.) UNOCAL / CHEVRON

(National Capital Region, Visayas and Mindanao Region)

Duties and Responsibilities:

As an OCTG NDT inspector at PNOC and UNOCAL, my duty is to inspect all the company’s drilling tools, mud motors, fishing tools and casing as prescribe on client’s specification and procedure.

Inspections must be conducted during and after drilling and based on how intensive the drilling most especially if have encountered some problem (i.e. stack-up).

Having OCTG as my job is a very serious thing, it deals with great responsibility; so I must do it correctly and accordingly with respect to the drilling standards; because when the drilling tools fails while on the hole, it takes time to recover it and most especially it cost a lot of money.

I have to be firm on every result; give orientation to the Drilling Engineers so that they are aware of the flow of inspection so they have ideas on the causes of rejection and how they might prevent this.

Inspection standards familiar with:

• API RP 7G

• API SPEC. 5D

• API SPECS. 5CT

• DS-1 TH-HILL

• API RP 5A5

• API RP 5B1

Drilling companies I have served:

• PNOC(PHILIPPINE NATIONAL OIL COMPANY)

• PGI UNOCAL/CHEVRON (PHILIPPINE GEOTHERMAL INC.)

• SDI (SCIENTIFIC DRILLING INC.)

• DESCO

• WEATHERFORD

• SLUMBERGEE

• BJ CEMENTING

• ADE (AUSTRALIAN DRILLING and EXPLORATION)

Lists of Drilling Tools that I have inspected:

• Drill Bit, Drill Pipes, Heavi-weight drill pipes, Drill collars, Stabilizers’, Masts, Kelly’s, Swivel,

Casing, Mud-motors, Lifting tools and Fishing tools.

Visual Thread inspection

MPI (Fluorescent) on Tool joints

Dimensional Inspection

UT Slip/Upset Area

MPI Slip/Upset Area

MPI Full Body

Thickness Gauging (Body)

Full Body OD Gauge

EMI1 (Buggy)Inspection

Stabilizer Ring Gauge Inspection

Straightness Inspection

Employer : NDT PHILS. INSPECTION SERVICES. INC.

Duration : From year 2001 to 2003 Positon : ASNT NDT LEVEL II (Multi-discipline) and Radiological Health and Safety Officer Project Location : All over the Philippines

Duties and Responsibilities:

Workings as NDT Technician:

• To perform various NDT inspection and to assure that all fabrications are in accordance to

client’s requirements during construction.

As the company’s RHSO my function is:

• To have the Radiographers maintain the safety usage of sealed sources and x-ray generating

equipment.

• To have them aware on the principles of Radiation Protection

• To control and record personal dosimetry and exposure to prevent overexposure.

• To implement necessary emergency plans.

• To process documentation for transportation of sealed sources.

List of companies where I have conducted inspection: (During Construction & Maintenance)

• PHILIP MORRIS INC.

• NISSIN MONDE INC.

• PETRON BATAAN REFINERY INC.

• CALTEX INC.

• MANILA INTERNATIONAL PORT.

• NINOY AQUINO INTERNATIONAL AIRPORT 3

• NAVOTAS MARINE SHIPYARD

List of companies where I have conducted inspection: (During Construction & Maintenance)

• AIR LIQUID INC.

• PAGBILAO POWER PLANT

• CAL-EN (CALIFORNIA ENERGY)

• SOLID CEMENT CORP.

• SM MALL OF ASIA

• ROBINSON’S MALL

Employer : FILIPINAS INSPECTION SERVICES INC.

Duration : From 1995 to 2000

Position : From trainee to NDT Level II (Multi-Discipline)

Project Location : All-Over the Philippines

Duties and Responsibilities

Started as trainee, I was already been tasked to perform NDT inspection with the guidance of my supervisor, we worked as team doing all the NDT at a fabrication yard. The supervisor taught me everything about NDT and how to make the job in accordance to different standards.

I worked hard to show them that I love this job and I am worthy to be trusted on the job; and after 2 years of being a trainee (NDT Level I), they have let me to be qualified to NDT Level II and have successfully passed the examination. My years of training are fruitful.

After passing the examination, I am now working as a full pledge NDT Level II and been assign at various locations all-over the Philippines. I talked to clients and discuss about the quality of welding during fabrication and construction; keep them updated weekly on the progress of repairs and submit final report for review and acceptance.

List of NDT Inspection I am familiar with:

• RT, UT , MPI and DPT of pipes and plates (all configuration)

• UT Flaw Detection of Mill Rollers

• RT of Bottom plates for marine tanker

• RT of newly welded pipes and plates for mother tanks

• UT Thickness gauging of various storage tanks

• UT Lamination of plates (various sizes and thickness)

• UT Flaw Detection for Side Links

• UT Flaw Detection for PCI Chucks

• UT Flaw Detection for Roller Coaster shafts

• RT of pipes (from small to big bore)

• RT of Castings

• DPT and UT Flaw Detection of Castings

• MPI of welds (butt to fillet) for Box Column & Girders

• Vacuum Leak Testing for Bottom welds (for existing and newly weld)

• UT Crack Detection for Piping Welds(existing weld)

• UT of C.E.S weld (for Box joints)

Companies and Fabrication Yard I worked at: (During Construction & Maintenance)

• GRANDSPAN DEVELOPMENT CORP.

• STEEL CENTER CORP.

• BF METALS CORP.

• LKS METAL CORP.

• AG&P

• VICTORIAS MILLING ENGINEERING & FABRICATION

• LA CARLOTTA SUGAR MILLS

• CALACA POWER PLANT

• MAUBAN POWER PLANT

• SOUTHERN ELECTRIC CORP.

• PROCTER & GAMBLE PHILS. INC.

• GOODYEAR TIRE INC.

• SOLID CEMENT CORP.

• REPUBLIC CEMENT CORP.

• PASAR (SMELTING & COPPER) CORP.

• LIGHT RAIL TRANSIT CORP.

• CONTAINER CONSILIDATED CORP.

• HONG KONG INTERNATIONAL AIRPORT

• LANTAU ISLAND DEVELOPMENT CORP.

• TIGER MACHINERY and CASTING CORP.

University and School Attended:

• TECHNOLOGICAL UNIVERSITY of the PHILIPPINES

(GRADUATED: NDT TECHNOLOGY COURSE YR. 1992-1995)

• SAN FRANCISCO HIGH SCHOOL

(GRADUATED: YEAR 1988-1992)

• SAN ANTONIO ELEMENTARY SCHOOL

(GRADUATED: YEAR 1982-1988)

Character References:

• MR. ROY PATERSON • MR. KEITH WILSON

OCEANEERING’S Supervisor EXXON Project Manager

• MR. BRIAN CAMPBELL

OCEANEERING’S Officer-in-charged

• MR. JOHN GREENBAUM

ESSO’s Construction Manager

• MR. WILLIE SANTOS

CHEVRON’S Chief Inspector

• MR. RONALD S. REYES

ASNT NDT LEVEL III

Contact this candidate