James P Shannon III

**** ********* **.

Grove City, OH, 43123

US

dnphqn@r.postjobfree.com Primary Phone: 614-***-****

Message Only Phone: 614-***-****

James P. Shannon III

OBJECTIVE I am available for all types of Commercial/Industrial Electrical, Instrumentation, and Commissioning/Maintenance projects

TARGET JOB Target Job Title: Technician/Commissioning

Alternate Target Job Title: Industrial/Commissioning Technician

Desired Job Type: Technician/Engineer

Desired Status: Electrical Technician

Desired Salary: To be discussed

Site Location: On-Site

Career Level: Mid Career (15+ years of experience)

Date of Availability: Negotiable due to current assignment

EXPERIENCE

1/2009-5/2010

ICS Electrical Services

Cincinnati, OH

Instrument/Calibration/Controls Field Technician

Instrumentation and controls for Coal Fired power plants (Duke Energy),

field calibration, troubleshooting, and maintenance for Duke plants Beckjord, Zimmer, Hanging Rock. Involved system and device troubleshooting levels, pressure devices, analog loops, digital loops, vacuum devices, temperature sensing, coal conveyors and controls. Mostly maintenance, some new installation commissioning.

COATS card compliant.

EXPERIENCE 5/2008 – 1/2009 Vintage Carpentry Electrical

Division Germantown, OH

Electrical Technician

Installation, repair, and troubleshooting of residential and commercial electrical projects in Southern Ohio area. Work is slow.

EXPERIENCE 11/2007- 5/2008 Bluewater Energy Solutions/ Washington Group Int/ URS Palo Seco, Puerto Rico

Electrical Engineer II (Field Electrical)

Installation, Electrical testing, Commissioning, Field Engineering, Start-Up at the Palo Seco Thermoelectrical plant, owned by PREPA. (Puerto Rico Electrical Power Authority)

This job involved installation, testing and commissioning of new electrical auxiliary equipment on 2 GE Steam turbine units(CTs, ISOphase, Transformers, Breakers, PTs, Cables LV, MV, HV), and testing and commissioning of Cutler-Hammer Switchgear, MCCs ranging from 120VAC/125VDC up to 13.8 KV. This job was a recovery job/new install, the plant caught on fire in 2006.

EXPERIENCE 10/2007-11/2007 Instrumentation Inter. Inc. Minden, LA

Instrument + Calibration Field Technician

Instrumentation and controls fabrication, setup, calibration and start-up at the Potash Ammonia Plant shutdown 2007 Augusta, Ga. On-site work date from Oct 6 2007 to Nov 2, 2007

EXPERIENCE 6/2007-10/2007 Cushion Seats Inc Ohio State University

Seat Installation Technician

Installation of cushion seats at the Ohio State University Stadium. Game day customer service. Part –Time work between field work

EXPERIENCE 3/2004-6/2005 SQUARE D Field Services Michigan Field Services

Senior Field Technician

High Voltage Electrical installation, testing, commissioning, and maintenance.

Electrical component installation, testing and maintenance from 24/480 Volts DC/AC to transmission line voltage (365KV-745 KV) on projects in the MI, OH, IN area.

Performed electrical installation, testing, start-up, and maintenance on 3 phase power systems from the power plant to utility company. Electrical testing and commissioning.

Test and commission the 3 Phase power and control circuits for the entire plant.

Installation and testing included medium/low voltage cables, transformers, CTs, PTs , breakers, switchgear, motor starters, Buss ways, generators, cables, motors, relays , protection devices, interface panels, controls, DCS interface, Plc interface, field engineering, and start-up procedures. Installed and commissioned phone lines and LAN connections. Tech shop setup.

EXPERIENCE 3/2003 – 3/2004 PSEG LLC Lawrenceburg, IN

Combined Cycle Maintenance Technician

High Voltage Electrical installation, testing, commissioning, and maintenance.

Electrical component installation, testing and maintenance from 24/480 Volts DC/AC to transmission line voltage (365KV-745 KV).

Performed electrical testing, start-up, and maintenance on 3 phase power systems from the power plant to utility company. Electrical testing and commissioning of power plant electrical systems for two PSEG power plants in Ohio and Indiana. (Waterford, OH and Lawrenceburg, IN) These plants range from 800 - 1150 megawatts.

Construct, test and commission the 3 Phase power and control circuits for the entire plant. Installation and testing included medium/low voltage cables, transformers, CTs, PTs , breakers, switchgear, motor starters, Bussways, generators, cables, motors, relays , protection devices, interface panels, controls, DCS interface, Plc interface, field engineering, and start-up procedures. Commissioned and installed phone lines and LAN connections. Plant warehouse and tech shop setup.

EXPERIENCE 1/2000 – 3/2003 CD Consulting Inc. Baton Rouge / La

Field Engineer/Technician

High Voltage Electrical Installation, testing and commissioning.

Electrical component installation and testing from 24/480 Volts DC/AC to transmission line voltage (365KV-745 KV).

Performed installation, testing and start-up on 3 phase power systems from the power plant to utility company. Electrical installation, testing and commissioning of power plant electrical systems for several Duke Fluor Daniel/ Duke Energy power plants across the United States. These plants range from 500 – 1860 megawatts with GE 7FA Gas Turbines. Installed, tested and commissioned the 3 Phase power and control circuits for the entire plant. Installation and testing included medium voltage cables, transformers, CTs, PTs , breakers, switchgear, motor starters, Bussways, generators, cables, motors, relays , protection devices, interface panels, controls, DCS interface, Plc interface, field engineering, and start-up procedures. Have pulled, terminated wire, and bent conduit to meet schedule needs. Duke Fluor Daniel projects employed at : Odessa-Ector Power project(Odessa, TX), Liberty Power project(Philadelphia, PA), Bastrop Power project(Austin, TX), Arlington Energy Power Project(Phoenix, AZ), Forney Power project(Forney, TX), Fayette Energy project(Pittsburg, PA), OXY-CHEM Taft Power project(New Orleans, LA)

EXPERIENCE 6/1998 - 1/2000 CD Consulting Baton Rouge, LA

Instrument + Calibration Field Technician

Instrumentation and controls for Co-generation power plants (Duke/Fluor Daniel)

field calibration, troubleshooting, and engineering for Mark V/VI and DCS external components. Involved system and device troubleshooting/engineering on pressure devices, analog loops, digital loops, vacuum devices, temperature sensing, and controls. Worked in and with commissioning personnel to start up gas turbines and troubleshoot issues as they arose. Duke/Fluor Daniel Plants employed at : Lamar Energy project(Paris, TX), Quadelupe Power project(New Braunfels, TX)

EXPERIENCE 6/1997 - 6/1998 Production Control Units Dayton OH

Field Engineering Technician/Electrician

Installation, start-up and set-up of fluid fill systems for the automotive industry.

The systems were designed for the assembly line in auto plants.

Engine, oil, antifreeze, refrigerant, and washer fluid for all makes of cars.

Traveled to several automotive plants and set up these systems to operate and function on the assembly line. (Ford, Honda, GM, Toyota, Chrysler)

Field engineering used to debug electrical, mechanical and PLC logic problems to blend new system into assembly line production.

EXPERIENCE 6/1996 - 6/1997 Weastec Hillsboro/ OH

Production Technician

Assembly line Technician

Troubleshooted assembly line downtime issues.

Electrical, mechanical, robotic, and PLC issues.

Designed and built new machinery for assembly line upgrade and better performance.

EXPERIENCE 11/1995 - 6/1996 Maca Plastics West union, OH

Quality Technician

Quality Control and machine maintenance at small parts factory.

EXPERIENCE 9/1992 - 6/1995 US ARMY US ARMY

Soldier/Mechanic

63E10H8 M1A1 Abrams Tank systems recovery mechanic.

Soldier.

EDUCATION 6/1998 Southern State Community College US-OH-Wilmington

Associate Degree

Associate of Electrical Electronics Technology

EDUCATION 12/1992 US ARMY US-Texas-FT HOOD

Certification

63E10H8 Tank Systems Mechanic/ Recovery training

LULL operator training.

EDUCATION 6/1992 Eastern High School US-Ohio-Macon

High School or equivalent

SKILLS Skill Name Skill Level Last Used Experience

*See additional info below Installation of:

Wire

Low/medium voltage cables

Switchgear

Breaker boxes

PTS/CTS

Transformers LV,MV,HV

Grounding

Generators

Boilers

Instrumentation

Transmission lines/components

DCS Components

Uni-strut

Conduit

Steel Fabrication

Buss way

Relays

LAN components

Communication Devices

Electrical Testing/Commissioning

Co-Gen Power Plants

Advanced Currently used 10+ years

REFERENCES Cope Disheroon CD Consulting President/CEO

Phone Number: 225-***-****

Email Address: dnphqn@r.postjobfree.com

Reference Type: Professional

Tim Ross Tim Ross Consulting/Rev 1 DCS Engineer

Phone Number: 937-***-****

Reference Type: Professional

Bill Rushing Oxychem Electrical Engineer

Phone Number: 713-***-****

Reference Type: Professional

Wes Clay Contractor Start-up manager

Phone Number: 580-***-****

Reference Type: Professional

Danny Ramsey Contractor Vintage Carpentry Electrical

Phone Number: 513-***-****

Reference Type: Professional

ADDITIONAL INFORMATION US military 1992-1995 Turbine mechanic and tank systems recovery mechanic

Class B CDL Commercial Drivers License

Electrical Component Fabrication and Installation

Allen Bradley PLC Training

Omron, Keyence, TI PLC Training

GE 7FA Gas Turbine Operations and Maintenance Training

GE D11 Steam Turbine Operations and Maintenance Training

AALBORG HRSG(Heat Recovery Steam Generator) Operations and Maintenance Training

US Filter Water Treatment Process Training

GE CEMS (Constant Emissions Monitoring System) Software Training

GE Mark V/ VI controls set-up

GE Digital generator protection devices

GE protective Devices (745, 369, ect)

Electro-industries Metering devices

Beckwith protective devices

Siemens switchgear, MCC, and protective devices

Square D switchgear, MCC and protective devices.

GE-Hitachi High Voltage Circuit Breakers

ABB High Voltage Circuit Breakers

Southern States Group Operated Air Disconnect Switch

Westinghouse DCS set-up

Swietzier protective devices

Many other electrical devices and computers

windows 98, nt, 2000, me, xp setup and device communication platforms

ABB, Hyundai, Fortune, Alstrom 3-phase transformers

GE LCI, Exciters, Link Reactors, Lockouts, Aux relays, and protection panel experience.

ABB robots, Nippondenso Robots

CPR/ Defibulator training.

CEMS training.

LULL training (6000LB)

GE Mark V training.

BOP training

GE Steam turbine training

PSEG Standards of Integrity training.

PSEG High Voltage Training

SAP Training

Hyster forklift training

Confined space, tie-off recovery training

Lock out tag out training

AALBORG HRSG training

Nalco Water treatment training

Arc Flash Training (Square D)

Contact this candidate