Singapore ****89 RESUME
SUMMARY OF PROFESSIONAL EXPERIENCE:
o Accumulated (12) years of continuous well experience in the field of instrumentation works that include (engineering design, construction, testing and commissioning and start – up) especially in instruments and Fire & Gas System
o EXPERIENCE OF FPSO FLOATING PRODUCTION STORAGE AND OFFLOADING
o PROJECT : FPSO BERANTAI
o Company : PETROFAC
o Position : Commissioning(Instrumentation Supervisor)
o Work Scope : GTG(Gas Turbine Generator) GTC(Gas Turbine Compressor)
o Period : 2012 (Jan)-Till Date
o EXPERIENCE OF FPSO FLOATING PRODUCTION STORAGE AND OFFLOADING
o PROJECT : FPSO PSVM, BP ANGOLA
o Company : MODEC
o Position : Commissioning ( Senior Instrumentation Supervisor)
o Work Scope : Gas Compressor(Man Turbo)
o Period : 2011(Sep)-2011 (Dec)
o PRE-COMMISSIONING ACTIVITIES
Like a pipe lines Flushing, air-blowing and nitrogen purging
Run Lobe oil cooling system. Simulate and check lobe oil low pressure trip, simulate high temperature trip.
Run pumps, motors, check the temperature, vibration monitor fallow by check list.
Run seal gas system. Seal gas booster, seal gas filters and seal gas heater and simulate all the instruments Pressure transmitter Temperature transmitter level transmitter pcv valves.
Execution of safety precautions ans tool box meeting scope of work.
o PROJECT : FPSO ARMADA TGT1
o Company : BUMI ARMADA
o Position : Commissioning ( Instrument Supervisor)
o Work Scope : Cargo system & Tank gauging system (Marine)
o Period : 2011(Feb)-2011 (Aug)
o PRE-COMMISSIONING& COMMISSIONING ACTIVITIES
o CARGO SYSTEM
Pre- Commissioning Activates like a pipe cleaning, leak test pipes plashing.
Check all cargo pumps& Turbines, Hydraulic valves, pumps& motors.
Purging cargo valves and set valves open timing and closing time, depending the valve size.
Hydraulic pumps and motors simulate high temperature trip, simulate hydraulic pumps high pressure trip and low pressure start
simulate pump A and pump B stand by start sequence . during pre-commissioning all valves do air purging.
All modulating valves calibrate and commissioning.
Simulate bearing vibration and temperature high trip
Simulate E STOP all cargo pumps by electrically and mechanically.
All turbines run by HMI system
Commissioning and simulate off pressure transmitter, Temperature transmitter, Temperature controllers, Turbine governors, limit switches, Flow meters, solenoid switches.
Close all PC ITRS
Familiar with P&D diagrams and lineup cargo system and run cargo pumps.
o TANK GAUGING SYSTEM
Install tank radars and pre-commissioning& Commissioning.
Simulate tank temperature, tank pressure and level.
Install and simulation all dropt sensors such as a AFT dropt, FWD dropt, port dropt and STBD dropt.
Install ballast tank pressure transmitter and commissioning.
Install temperature sensor and commissioning.
Close all PC ITRS .
o PROJECT : FPSO JUBILLE
o Company : MODEC
o Position : Commissioning (senior Instrumentation Technician)
o Work Scope : Fire& Gas System
o Period : 2010(May)-2010 (Aug)
o FIRE&GAS SYSTEM
Cold loop check& continuity check of power and instrument cables from system cabinet in CCR to interface junction boxes, and instruments cables. MC and PC inspections of analog and digital signal junction boxes, process and fire& gas instrument installations on all decks as per location drawing, P&ID, wiring termination details and forward punch list report to construction for rectification
ESD system functional check with process equipment vendors and duly witnessed by client on the field side and in the workstation
Troubleshoot and loop check of gas detectors (Line of sight, flammable and toxic) heat& flame and smoke detectors for the fire& gas system and calibration if necessary.
o Having good knowledge Onshore& Offshore Safety Rules& Regulation.
o Good knowledge about permit to work system (PWS) and several kinds of permits liks cold work permit, Hot work permit, limited space entry permits.
o Familiarity about server kinds of perilous Involved in work area and essential safety measure to be done for the safe work.
o Capacity to do job alone by following safety rules& regulations.
o Power up all DCS and ESD panels in control room and energize process instrument loops in the field after the cold loop checks.
o Hot loop checking of the DCS and ESD system for the gas in priorities with client on both sides, troubleshoot and corrections of requested loops.
o Maintenance and instrument system check of Turbine Generator with equipment vendor for proper operation.
o Actual calibration of Displacer, capillary and bubbler type level transmitters using actual process fluids.
o Report to engineers the progress or either not operational, defective and damaged instruments at each loop for immediate replacements, repair or corrections.
o Good Experience in the marine& topside maintenance and commissions.
o Sound knowledge and good experienced in the management topside instrument Maintenance.
o Specialist in installation & Calibration of different types of the modern smart Electronics& pneumatic instrument.
o Skilled in PLC, DCS, ESD Plant Automation Control Systems.
o Effective knowledge of the lock out tag out processes.
o Operational Knowledge in fire and gas systems like hc detectors & uv, H2S Dtectors, smoke detectors.
o Sound skills of all kinds of rotating Equipment Maiantence, Gas Turbines, compressors etc. Moore and Bentley navada monitoring components calibration devices.
o Experienced with Fisher, Rosemount, Foxboro, Honeywell, Yokogawa Moore and Bentley navada monitoring components calibration devices.
o Company : KEPPEL FELS
o Period : 2007 (May)-2009(Apr)
o Position : Commissioning
o KEPPEL FELS LTD, Singapore.: DISCOVERY-1 (JACKUP RIG 350 WD),
VIRTUE-1 (JACKUP RIG 350 WD),
VASUMATI (JACKUP RIG 375 WD)
GREAT DRILL CHITRA(JACKUP RIG 350 WD)
PETROVIETNAM PV-2(JACKUP RIG 350 WD
o KEPPEL FELS LTD, Singapore. TRANSOCEAN, DEVELOPMENT DRILLER-3 (SEMI SUBMERSIBLE, ) water depth-7,500ft, Drilling depth-35,000ft Classification-ABS class, worked in all electrical & Instrumentation systems.
o Company : SINGSPORE TECHNOLOGIES MARINE
Period : 2001(Jun)-2007(Apr)
Position : Commissioning Foreman
o PROJECT : TIDE WATER
Period : 2001-2003
o Company : SINGAPORE TECHNOLOGIES MARINE
o PROJECT : FORMIDABLE CLASS FRIGATE,(RSS INTREPID-69),
: FORMIDABLE CLASS FRIGATE,(RSS STEADFAST-70)
: FORMIDABLE CLASS FRIGATE,(RSS TENACIOUS-71)
: FORMIDABLE CLASS FRIGATE,(RSS STALWART-72)
: FORMIDABLE CLASS FRIGATE,(RSS SUPREME-73)
Period : 2003-2007
o SEMBAWANG SHIPYARD LTD, Singapore. ARV1 (EQUINOX OFFSHORE) conversion project of accommodation for up to 500 personnel. worked in all electrical & Instrumentation system
o Company : EQUINOX OFFSHORE
Period : 2009 (May)-2010(Mar)
Position : Commissioning
SPECIALITY ON FIELD:
Able to calibrate instrument such as pressure transmitter, gauges, temperature transmitter, level transmitter and flow instrument. Hand-on loop checking from CCR Room to field transmitter, including Fire and Gas system and shut down system.
DUTIES AND RESPONSIBILITIES:
o Panel installation, Switch board installation and maintenance.
o Testing & commissioning of Panels & switchboards
o Perform preventive maintenance of switch board Transformer LT and HT.
o Control over the sub contractors.
Familiarized in lighting, PA, Communication, Instrumentation and Electrical power system
o Monitoring on quality of E/I Installation works.
o Prepare Observation damage reports on any Electrical equipments and apparatus.
o Supervision/Inspection of every aspect of Electrical & Instrumentations Fabrication.
o Undertakes erection and installation of cable tray, conduit, cable duct banks, Electric motors and other electrical and instrument equipments.
o Prepare and monitor cable cutting plan to ensure there is no excess cutting before they commence on cable pulling.
o Responsible on cable
o Pulling and cable termination of HV/MV/LV Cable Conduct Electrical and Instrument inspection on new installation and turnover of complete system for acceptance.
o Installation Hook-up of Electrical & Instrumentation Equipments such as Transmitters, Telecom, F&G.
o Supervise vessel Accommodation & Engine Room on Installation on Various Electrical/Instrument system such as Control Valve
o Evaluate and Monitor Construction activities to ensure proper compliance to the installation standard specification and approved detail drawing to ensure the efficient progress and right time to complete the project.
o Identify and control all Design Interface according to the Applicable standard code of practice and monitors the progress and quality of the works of the subcontractor
o Prepared and issued site instruction to the E &I contractors for the work modification and the other scopes not reflected on the specs in construction drawings
o Review /check the status of materials delivery in related to project schedule.
o Verify that Electrical & Instrument Equipment meet the applicable area classification and specification.
o Witness and sign off all loop test, witness reinstallation of Instrument after testing and witness all Electrical test and verify results as complying with Job specifications, vendor recommendation and standard
o Generate punch list on Electrical & Instrument scope of works.
o Witness and sign off all loop test, witness reinstallation of Instrument after testing and witness all Electrical test and verify results as complying with Job specifications, vendor recommendation and standard.
o Prepare of look-ahead work schedule and progress report, Requisition, Handling & Follow up of Materials to meet Project schedules. .
o Verified A&B scope mechanical completion and pre-commissioning by system and priority as applicable including documentation.
o Responsible for monitoring of Mechanical Completion Check Sheets.
o Verify Mechanical completion and generate punch list for the outstanding works involve.
o Performed joint inspection with the contractor in shop calibration, field installation loop & functional test, continuity & megger, high and low voltage test, lighting illumination and pump motor load run.
o Knowledge on hands on installation such as: LV/MV/HV/termination and cable joint, conduit, Cable tray fitting
o Recommend upgrading for corrective measure if necessary, Functional Test PA/GA, and Auto telephone system including PPU. Beacon sounder and Status Lights.
o Test LV & HV Power Cables through Megger Test.
o Switch boards and Generator synchronize and controls
o Tank pressure and Tank Temperature System
o Doing the commissioning of Level transmitters, Pressure Transmitters, Level &Pressure switch, Main Engine safety system.
o Doing the installation, service, Calibration, commissioning of oil mist detector(OMD),oil water separator(OWS)
o Service, Repair of Level switch, pressure transmitters, Float sensors
o Secondary School Leaving Certificate (1993-1994) from Board of Secondary Education, Andhra Pradesh, India.
o Industrial Training Institute ITI (1994-1996) from Board of Technical Education, India.
o Diploma in Electrical &Electronics Engineering. (1996-1999) from Department of Technical Education, India.
o NTC-2 in Electrical Technology (Dec 2006) from ITE, Singapore.
o Skills Evaluation Certificate Introduction to PLC Programing (July2006) ITE, Singapore.
o Shipyard Supervisor Safety Course (Apr 2006) NTUC Learning Hub, Singapore.
o Basic offshore Safety Valid Until 2015 (May)
Having a valid Class3 Motor Vehicle Driving License in Singapore
Date of Birth : 11.04.1978
Marital Status : Married
Nationality : Indian
Language Known : English, Tamil and Telugu
Passport No. : G2889782
Place of Issued : Singapore
Residential Status in Singapore : Permanent Resident
NRIC No. : S7862734D
I hereby declare that the above given information by me is true to the best of my knowledge and belief.