Engineer Project

ASIT KUMAR

Mobile: +968-******** E-mail: **********@*****.***

Objective:

To secure a challenging and satisfying position in an organization where there is an ample scope for organizational growth and development and also which gives me an opportunity to utilize my creativity, intelligence and communication skills and build my overall personality on the basis of my strengths.

Professional Summary:

Instrumentation Engineer with 8.0 years of experience.

• Working as Control & Automation Engineer for WorleyParsons Oman Engg LLC. From July,2010 to Till date

• Worked as Instrumentation Engineer for CAIRN ENERGY India Pty Ltd. from September, 2009 to June,2010

• Worked as Control System Engineer for BECHTEL India Pvt. Ltd from February, 2006 to April,2009

• From July, 2004 to January 2006, I worked as Asst. Manager (Electrical & Instrumentation) in Bharat Aluminium Company, Sterlite, Vedanta group.

Core Competencies:

Design & Development

• Familiar with various Codes and Standards and Interfacing with other departments, Diagnosis and trouble shooting of the problems.

• Working as Lead Engineer for the various projects which involve Man-hours estimations per deliverables, prioritizing activities, Detail designing including delivering safe and optimum Solution for the Design activities, Post Design Site Support in Pre-commissioning & commissioning activities.

• Experience in Feed (Front End Engg Design), Detail design, Interface studies, Concept & Select job

• Experience in leading a group of 5 to 10 people depending on the Volume of the project.

• Involved in the Concept/ Select Job providing input to the Basis for Design, Concept selection report.

• Involved in Detail I&E Design Activities which includes Instrument Selection, preparation of Scope of Work (construction Contractor/Control System Contractor), Instrument Design Basis, communication architecture, Control /ESD System Specifications, Instrument /Equipment Datasheets, Bid Evaluation Reports, Cost Estimations, Functional Logic Drawings, Control Valve /Instrument Calculations, BOM, I/O List, Instrument Index, Hook-Up, MTO Cable Schedule, Cable Layout, Wiring Drawing /Loop Drawing etc. Also, Working with Clients in relation to the Spares availability

• Installation & commissioning of Electrical & Control System. Shutdown System (ESD/F&G).

• Involved in 30%, 60% & 90% model reviewing w.r.t to accessibility for maintenance, Location and Clash check with piping.

• Participating in Process safety Studies (eg: HAZOP, SIL Review).

• Attending Factory Acceptance Test at vendor locations

• Experienced with Flow Instrument Sizing/Calculations.

• Participate in Technical Review in QA/QC and Engineering Works.

• Handling a gamut of operations for vendor development & management for procurement of the instruments as per the clients need.

• Providing Training on INTOOLS & Smart Plant Review.

• Knowledge of Thermal Power Plant, Boiler Control.

• Vendor Management in relation to Site coordination, Expediting/Handover of Documents at pre-Commissioning Completion Stage and also as built Documents.

• Inventory Management in relation to 2 yrs operational spares & commissioning Spares.

• Cost Management

• Project Performance reviewing & reporting

• Rewarded for an outstanding Performance in Quality as well as Cost Saving for the Client.

Work Experience:

1. WorleyParsons Oman Engg LLC; July, 2010 to Till Date.

Experience in Front End Engineering Design (FEED), Detailed Design and Interface studies, Concept/Select job.

Working as Lead Engineer for the Following Greater Birba Project:

• Greater Birba Well Hook Up Projects.

• Greater Birba Well-Hook Up Standardization Projects

• HARWEEL Phase-3 EPC Project.

• High GVF meter at Zalzala North and South RGMS.

• Short lead Procurement for 21 Wells Bulk Procurement project.

• Long lead Procurement for 21 Wells Bulk Procurement project

• AL-Noor Production Station Hazop & IPF Class B Action Close out--Select Job.

• Birba Gathering Station Hazop & IPF Class B Action Close out--Select job.

• Revamping of 3 Flares in Birba & 2 Flares in Al-noor--Select job

• Greater Birba Hazop & IPF VAR-6 Action Close out Select Job

Job Responsibilities:

• Perform Detail I&E Design Activities which includes preparation of Scope of Work (construction Contractor/Control System Contractor), BOM, I/O List, Instrument Index, Control /ESD System Specifications, Instrument /Equipment Datasheets, Cable Schedule, Cable Layout, Wiring Drawing /Loop Drawing, Functional Logic Drawings, Control Valve /Instrument Calculations, Bid Evaluation Reports, Cost Estimations.

• Follow up & review of activities of Engg Consultant / Contractor including reviews/Comments on Basic & Detail Design, Drawings/Documents completion and Compliance with Codes, Standards.

• Undertaking Engineering Activites as a Lead and Responsible for Delivering Safe, Cost Effective, optimum & Complete Engineering Activities in all Respect.

• Responsible for Handling grass root level Installation projects along with Modification projects in existing set up Keeping in View the Safe Operation of the Facilities.

• Assisting Project Managers and Other End Users Group, Handling Site queries related to Design & Engineering issues.

• Coordinate with Other Discipline Engineers, Departments such as Procurement, Engineering Contractor, Construction Supervisors to ensure that all safety, Technical & Operational requirements are met.

• Design or Modify Safety Shutdown Logic i.e. Unit Shutdown, Emergency facility Shutdown etc.

• Participating in Process safety Studies (eg: HAZOP , SIL Review).

• Provide Technical Support During Construction & Commissioning Activities.

2. CAIRN ENERGY INDIA PTY LTD.; Sep, 2009 to June, 2010.

Job Responsibilities:

• Review of Vendor Packages

• Preparation of Pre-commissioning & commissioning checklists.

• Hand over documents from contractors / suppliers at pre-commissioning completion stage confirming their acceptability.

• Vendor Management

• Inventory Management in relation to 2years Operational & Commissioning Spares Availability

• Cost Management / Analysis

• Participate in Technical Review in QA/QC and Engineering Works.

• SAP Support in MM Module

• Site Co-ordination in relation to commissioning activities.

• Project Performance Reviewing & Reporting

• Reviewing of Instrument Specification, Hook up Drawing.

• Involved with Procurement Supply chain management group for EOI release, Tender Floating,Bid list preparation, negotiations, contract finalization and Post contract administration

• Part of the Joint Venture team for JV notification, Operating committee approval, CAG Auditing (Comptroller and Auditor general of India)

3. Bechtel India Pvt. Ltd. (EPC Global India Pvt. Ltd.), Jan, 2006 to April, 2009

I) Project: MOTIVA Client: SHELL & Saudi Aramco, Port Arthur, Texas

Period: July, 2008- April, 2009.

Job Responsibilities:

• Reviewing of Level Setting Diagram done by Shangai office

• Reviewing of the Magnetic Level Gauge vendor Print for three units.

• Responsible for the Checking of Vendor Wiring of Saturated gas plant unit

• Responsible for the Checking of the Isometrics For Instrumentation Scope

• Reviewing of instrument datasheets Like Magnetic level gauge, Pressure gauge , Guided wave radar, Pressure Transmitters, Temperature Transmitter

• Checking of Instrumentation Index for the saturated gas plant Unit.

• Preparing DCS Specification

• Reviewing of cable Schedule, I/O List Preparation, Instrument Interconnection Drawings

• Responsible for Model review, Clash checks & inter Disciplinary Co-ordination

II) Project: SHELL Athabasca oil sands Project Client: SHELL, Canada

Period: Apr, 2007- June, 2008.

Job Responsibilities:

• Preparation of datasheets of field instruments like Orifice plates, flow transmitters, pressure transmitters, Vortex and Ultra sonic Flowmeters, Flow indicators & DP Level transmitters.

• Working on IN-TOOLS(INTERGRAPH) 7.3 Software Modules:

Reviewing of Instrument Index

Instrument Specification & Process Data Module

Instrument Loop Generation

Instrument Hook-up’s (Air, Support, Process) assignment

• Sizing calculation of Orifice Plates using Flowell& INSTRUCALC.

• Reviewing Vendor prints

• Checking of location layout w.r.t the Instrument assignment to junction box

• Reviewing of instrument & junction boxes Modeling done w.r.t to accessibility for maintainence, Location per vendor print, Clashes with piping.

• Responsible for the Detailing of the wiring of Foundation Field bus, Conventional & Fire & gas, Motor Control cabinet wiring in coordination with the Bantrel, Canada

• Interdisciplinary checks with various Disciplines.

• Reviewing I/O list Preparation, Cable Drum Schedule, F&G Layout, F&G Instruments Modeling and junction box loading.

• Involved in Model review w.r.t to Instrumentation Scope

III) Project: OGD III (On shore Gas Development) –Client: GASCO

Period: Feb, 2006 – Mar, 2007.

Job Responsibilities & Accomplishments:

• Preparation of Level Setting Diagram

• Preparation of Junction Box Loading

• Preparation of Junction Box & Instrument cable Block Diagram

• Preparation of Instrument Wiring Diagram & Loop Drawings in INtools

• Review of System Vendor data for uploading wiring in INtools

• Preparing instrument datasheets Like Pressure gauge, Temprature gauge, Flow Transmitter, Pressure Transmitters.

• Calculation of Cable Length Using Setroute

• Reviewing of Vendor print

• Preparation of Cable Schedule, I/O List for DCS Vendor, Drum Schedule.

3. Bharat Aluminium Company (Sterlite, Vedanta Group), July 2004 to Jan, 2006.

Job Responsibilities:

• Involved in the Projects for 12 Months in relation to the Detail Engineering of Individual Equipments & their PLC’s Supplied by Outo Kumpu, germany..Aisco, canada…Brochot, France…CAITC, China

• Involved in the Software Development of carbon area ( GAP & Rodding shop) using Control Logix 5000 Controller

• Worked with interfaces of various PLC’s & third party Devices via Controlnet.

• Involved in the Installation & Commissioning of Electrical & controls System of Rodding Shop.

• Responsible for Cable Routing, Cable Scheduling, Detailing of Equipments with Motor Control cabinet, Study of Installation, HOOK UP Drawings.

• Shift leader of the E&I Maintenance group.

• To rectify any problem related to PLC Programming & to ensure that Plant is running smooth.

Technical Skills:

• INTOOLS: Is full-featured engineering software, which supports the Instrumentation Design, Documentation and Maintenance discipline.

• FLOWEL 4.0

• INSTRUCALC

• SMARTPLANT REVIEW (SPR)

• MICROSTATION

• SAP ( MM MODULE)

• PDS (Basic)

Educational Qualification:

• B.E in Instrumentation Technology from S.I.T., Tumkur.

• 10+2 from Church School Beldih, Jamshedpur

• S.S.C. from Church School Beldih, Jamshedpur

Training Undergone:

• Advanced Training on Software development using CONTROL LOGIX & SCADA DEVLOPMENT Using RS VIEW32 Software at Rockwell Automation, New Delhi.

Personal Profile

• Father’s Name : B.G.K. Prasad

• Date of Birth : 22-11-1981

• Gender : Male

• Nationality : Indian

• Languages Known : English, Hindi, Bengali

• Present Address : Tower 6, Flat No.503, Sec-52, Sushant Estate, Gurgaon

• Passport : J6418406

Contact this candidate