Instrument Commissioning Technician
Resume:
LEOVEN ERICKSON S. LORIN
** ******* **., ***** *******, Mobile: +63-916*******
Ft. Bonifacio, Taguig City, Residence: +63-935*******
Philippines
Malaysia Number: +601*********
Date of Birth: May 07, 1982
Citizenship: Filipino
E-mail: **************@*****.***
OBJECTIVES
Seeking a position as Instrument Commissioning Technician where my experiences, trainings and good work habits will be an asset to your company.
Summary of Qualifications:
A qualitative competence summarized by academic trainings and skills in Bachelor of Industrial Technology Major in Instrumentation and Control Engineering Technology with strong determination to seek opportunities that offers continuous learning on my chosen field of expertise and to develop my personality.
EXPERIENCES
Shell MDS Sdn Bhd / NES Global Malaysia
(IPS Rejuvenation Project)
Bintulu, Sarawak, Aug. 01, 2011 – Nov. 30, 2011
Malaysia
Instrument Commissioning Technician /
Narrative Cause & Effect Function Test Technician
Job Summary: Worked under Function Test Lead and Instrument Commissioning Engineer and responsible for overall instrumentation and narrative cause and effect function testing activities.
• Ensuring necessary HSE reviews are undertaken and identified actions completed.
• Carry out Hazard and Risk Assessments (JSA) for all tasks as per company policy and procedures
• Performs required functional testing of instruments
• Confirms device set points as per design
• Performs Safeguarding functional test and trip/interlock test for each system of the plant
• Implement testing of control narratives and Cause & Effect matrices to ensure detailed design specification is achieved
• Testing of ESD circuits to be achieved in a logical manner and to be demonstrated to an independent verification authority.
• Input commissioning ‘B’ sheets to project completions database and reporting of any system deviations
• Ensure awareness of and prompt safe completion of work packs
• Updating all associated commissioning documents, including “as Built” mark ups.
• Maintain the latest revision of all project documents, drawings, specifications, and standards required for Quality Assurance, Quality Control and Inspection
• Coordination of all activities associated with testing including PTW and liaising with ICSS systems engineers and other disciplines
• Advising and reporting directly to Instrument Commissioning Engineer
• Following required Commissioning Plans and Procedures
• Assist commissioning and support to start-up scope
• Participating in and assist with the co-ordination of the Project’s performance tests
• Contributing to the Commissioning Group’s improvement process and close-out report
• Use and input to Commissioning Dossier in order to understand and check design
• Understand the Project standards and ensure the design meets the requirements
• Review and follow project design documentation and procedures
• Organize/assist in preparation of documents required for final hand-over of project
EEI Corporation-(Fabrication Project)
CD Shop, Bauan, Batangas, Oct. 12, 2009-Feb 26, 2010
Philippines
Instrument Technician
Job Summary: Worked under Instrument Foreman and responsible for overall instrumentation and electrical activities:
• Cable pulling, glanding and termination of primary and secondary cable from field to control room.
• Perform loop check and line checking of per tag number of field mounted instruments to junction box to control room.
• Installation of instrument cable duct, impulse lines and supports
• Valve stoking of control valves, shutdown valves and blowdown valves
• Performed calibration techniques and principles of different instruments use in the
plant
• Confirms device set points per design
• Adheres to safety and quality standards as applicable to duties and accountabilities
• Recording as built engineering changes on drawings
• Walks down subsystems for erection completion
• Identifies broken or failed devices for replacements within completion schedule
• Completes testing documentation
• Able to read Piping&Instrumentation Diagram, Instrument Location Drawing,
Control Loop Diagram and Hook-up Drawing
CONOCO PHILIPS/Air Energi Group Singapore Pte Ltd
(Bohai FPSO Phase II Development Project) May 12, 2008-Dec. 17, 2008
Sembawang Shipyard, Sembawang, Singapore
Instrument Commissioning Technician
Job Summary: Worked under Senior Instrument Technician and responsible for overall instrumentation commissioning activities such as:
• Inspect and validate completion of construction and pre-commissioning activities on site to ensure the safe execution of the commissioning procedures
• Check and confirm all relevant loop components electrical and instrument MC ITR check sheets are complete with no outstanding “A” punchlist items
• Assist to specialized vendor of Power Generation and Compression System
• Perform and confirm “cold loop” check results are acceptable prior to loop energization
• Confirm that all Analog and Digital loop configuration/ranges and alarm/trip settings are correct on HMI/UCP graphics to the latest revisions of I/O schedule/data sheets and alarm and trip schedule
• Perform all functional and calibration test of different instruments of all process variables---pressure, temperature, flow, level and vibrations
• Check configuration of Smart Instruments are correct as per Project/Vendor data sheet and from HART Communicator
• Confirm all loop components indication/ranges/alarms/fault tests are correct on graphic/point/detail display pages
• Carry out loop test to/from PCS/PSD/ESD/UCP Systems
• Implement and follow through planned maintenance routines and schedules for all instrumentation.
• Ensure that all applicable equipment adheres to intrinsically safe codes of practice.
• Ensure compliance with Conoco Phillips permit to work system, isolation standards.
• Be aware of roles and responsibilities with regard to emergency response.
• Be aware of roles and responsibilities with regard to emergency response.
• Assists the Commissioning Manager in the implementation of the Lockout/Tagout (LOTO) program
• Identifies broken or failed devices for replacements within completion schedule
• Prepares equipment and subsystem turnover documentation
• Recording as built engineering changes on drawings
• Supports plant operation during startup and initial operations
• Performs device function, interlock, and loop checks as required
• Verifies equipment is set up and tested per the supplier’s requirements
• Verifies equipment installation per design
• Assists in PLC checkout as required
• Confirms device set points per design
Chevron Angola/EJ Joint Venture Philippines Inc.
(Takula Gas Processing Project) March 26, 2008-May 03, 2008
Luanda, Angola
Instrument Technician
Job Summary: Worked under Instrument Supervisor and responsible for overall instrumentation works such as:
• Termination of primary and secondary cable from field to local control room going to control panel
• Sets up equipment
• Performs testing and calibration of instrument devices and equipment
• Verifies equipment is set up and tested per the supplier’s requirements
• Confirms device set points per design
• Adheres to safety and quality standards as applicable to duties and accountabilities
• Record as built engineering changes on drawings
• Performs required functional testing of equipment and systems
• Verifies equipment installation per design
• Walks down subsystems for erection completion
• Pre-loop and final loop test of all transmitters and calibrate the accurate set point of signal input and output between the controller and field transmitters.
• Valve stroking of control valves and on/off valves
• Implement and follow through planned maintenance routines and schedules for all instrumentation.
• Ensure that all applicable equipment adheres to intrinsically safe codes of practice.
• Ensure compliance with Chevron permit to work system, isolation standards.
• Be aware of roles and responsibilities with regard to emergency response.
• Be aware of roles and responsibilities with regard to emergency response.
• Able to read Piping&Instrumentation Diagram (P&ID)
Daelim/EEI Corporation-(PetroFCC Project) Feb. 19, 2007-Jan. 07, 2008
Petron Refinery Corporation, Limay,
Bataan, Philippines
Instrument Technician
Job Summary: Worked under Instrument Foreman and responsible for overall instrumentation works such as:
• Installation of instrument cable duct, impulse lines and supports.
• Installation of different instruments such as smart transmitters, level instruments, pressure gauges, etc.
• Performed calibration techniques and principles of different instruments use in the
plant
• Valve stoking of control valves, shutdown valves and blowdown valves
• Popping and reseating and seat leakage test of relief valves
• Verifies equipment is set up and tested per the supplier’s requirements
• Performs required functional testing of equipment and systems
• Walks down subsystems for erection completion
• Adheres to safety and quality standards as applicable to duties and accountabilities
• Completes testing documentation
• Record as built engineering changes on drawings
• Identifies broken or failed devices for replacements within completion schedule
• Able to read Piping&Instrumentation Diagram, Instrument Location Drawing,
Control Loop Diagram and Hook-up Drawing.
Alliance Bechtel Linde-(Borouge Petrochemical Project)
Al-Ruwais, Abu Dhabi, UAE May 17, 2006-Nov. 28, 2006
Instrument Technician
Job Summary: Worked under Instrument Supervisor and responsible for overall instrumentation works such as:
• Termination of primary and secondary cable from field to local control room going to control panel
• Installation of cable tray and impulse lines.
• Adheres to safety and quality standards as applicable to duties and accountabilities
• Verifies equipment installation per design
• Identifies broken or failed devices for replacements within completion schedule
• Completes testing documentation
• Recording as built engineering changes on drawings
• Sets up equipment
• Performs testing and calibration of instrument devices and equipment
• Verifies equipment is set up and tested per the supplier’s requirements
• Confirms device set points per design
• Pre-loop and final loop test of all transmitters and calibrate the accurate set point of signal input and output between the controller and field transmitters.
• Valve stroking of control valves and on/off valves
• Able to read Piping&Instrumentation Diagram (P&ID)
EEI Corporation-(Goro Nickel Project)
CD Shop, Bauan, Batangas, May 18, 2005-Mar.21, 2006
Philippines
Instrument Technician
Job Summary: Worked under Instrument Foreman and responsible for overall instrumentation works such as:
• Installation of instrument cable duct, impulse lines and supports.
• Installation of different instruments such as smart transmitters, level instruments,
pressure gauges, etc.
• Adheres to safety and quality standards as applicable to duties and accountabilities
• Verifies equipment installation per design
• Identifies broken or failed devices for replacements within completion schedule
• Completes testing documentation
• Recording as built engineering changes on drawings
• Sets up equipment
• Performs testing and calibration of instrument devices and equipment
• Verifies equipment is set up and tested per the supplier’s requirements
• Confirms device set points per design
• Valve stoking of control valves, shutdown valves and blowdown valves
• Able to read Piping&Instrumentation Diagram, Instrument Location Drawing
Control Loop Diagram and Hook-up Drawing.
I&E Industrial System Services, Inc. Dec. 4, 2004 – April 26, 2005
Libjo Tacad, Batangas City, Philippines
Instrument Technician
Job Summary: Worked under Instrument Supervisor and responsible for overall instrumentation works Such as:
• Adheres to safety and quality standards as applicable to duties and accountabilities
• Sets up equipment
• Performs testing and calibration of instrument devices and equipment
• Verifies equipment is set up and tested per the supplier’s requirements
• Confirms device set points per design
• Performs testing and calibration of instrument devices and equipment
• Verifies equipment is set up and tested per the supplier’s requirements
• Knowledge of PID (Proportional Integral Derivative) controllers’ fundamentals and tuning
• Able to read Piping and Instrumentation Diagram and Control Loop Diagram.
JFM Marine & Industrial Services Nov. 2003 – Nov. 2004
Manghinao Proper, Bauan, Batangas City,
Philippines
Electrician
Job Summary: Worked under the direction of the Master Electrician and responsible for overall electrical operation.
.
On The Job Training
National Power Corporation March 4, 2002-April 16, 2002
Mahabang Parang, Batangas City
Electrical Operator
National Power Corporation July 11, 2001-Sept. 28, 2001
Mahabang Parang, Batangas City
Electrical Operator
FRAMES Marine and Industrial Services February 6, 2001-April 24, 2001
Manghinao Proper, Bauan Batangas
Electrician
National Power Corporation October 2, 2000-Dec. 7, 2000
Mahabang Parang, Batangas City
Electrical Operator
LMG Chemicals Corporation June 16, 2000 – Sept. 19, 2000
San Pascual, Batangas
Electrical /Instrument Technician Assistant
EDUCATION
Tabinay Elementary School
Brgy. Tabinay, Puerto Galera, Oriental Mindoro
June 1989- March 1995
Puerto Galera Academy
Poblacion, Puerto Galera, Oriental Mindoro
June 1995-March 1999
Batangas State University
Alangilan, Batangas City
June 1999-April 2003
Bachelor of Industrial Technology Major in Instrumentation and Control Engineering Technology
SEMINARS AND TRAININGS ATTENTED
Programmable Logic Controls
MFI Building, Ortigas Avenue, Pasig City February 23-March 12, 2009
Philippines
Advanced Industrial Motor Control
MFI Technological Institute January 12-February 10, 2009
MFI Building, Ortigas Avenue, Pasig City
Philippines
Commissioning Permit to Work Training
Conoco Philips May 22, 2008
Project 10, Sembawang Shipyard, Sembawang,
Singapore
Basic Offshore Safety Induction Emergency Training ( BOSIET)
Consolidated Training System Inc., March 5-7, 2008
Bunga, Tanza, Cavite,
Philippines
Current Trends on Processes in Instrumentation and Control Engineering Technology
Batangas State University February 28, 2003
Alangilan, Batangas City
Philippines
Electrical Safety Awareness
Teacher’s Conference Bldg., April 27, 2005
P.Herrera St., Batangas City
COMPUTER EXPOSURE (SKILLS/COMPETENCIES)
Knowledge on Windows XP and Vista, Microsoft Word, Excel, PowerPoint, PDF File
CHARACTER REFERENCE
Name Position
Mr. Geoffrey Atienza Instrument Supervisor **********@*****.***
Mr. Angelo Kris Marcos Senior Instrument Engineer-Upstream ******.******@*****.***
Mr. Cruzberth Cruz Instrument Lead
*******@*****.***
Contact this candidate