Colton R. Haugen
PO Box ***
Manhattan, Montana *9741-0662
************@*****.***
OBJECTIVE:
Permanent Employment
EXPERIENCE:
At sixty-six years old I have back ground in many different occupations as well as life experience in doing things for myself. I have over six years’ experience working in the industrial manufacturing field for a saw mill, and a modular home factory. I have over twenty years in the construction industry. I additionally have ten years in the farm and ranching industries. Throughout my years of various employments I have a working knowledge of many pieces of equipment. From grain trucks, tractors and tractors with front and rear implements, as well as skid steers, telehandler, self-propelled man lifts, prentice style log loaders, as well as small fork lifts and 5 ton and 8 ton fork lifts. I have also had a small amount of heavy equipment training with tractor style back hoe with a front end loader bucket and mini excavators
EMPLOYMENT:
Talisman Construction Services Inc. Spokane, Washington 06/2026 – 09/2026
- I hired on with this company as a seasonal help for doing demolition work on a six-story building on the MSU Campus in Bozeman. The work consisted of setting up scaffolding and working off of the scaffolding. As well as setting up and working off of suspended swing stage scaffolding. My job consisted of using concrete saws and roto-hammer drills, to remove concrete eyebrows around all the windows of this building that were deteriorating. All the broken chunks were loaded into a mucking hopper mounted on a forklift and hauled to a dumpster after 3 weeks on the job I was placed in charge of operating the forklift which consisted of loading the hopper with the hammered off 75-pound chunks of concrete and disposing of them in a 40-foot haul off dumpster. I also moved the scaffolding parts to different locations using the forklift this was done in and around MSU students moving between buildings. So, I used the utmost caution and safety practices to avoid any accidents or injuries to the students. Part of my position was to install and maintain pylons and safety tape around our work areas to ensure the safety of the students. Elk Ridge Construction, Manhattan, Montana 04/04/20 – 06/01/2026
- This is my own general contracting business. I run all aspects of this business. I handle all job prospects, figure and place all bids. I purchase any and all materials needed for said jobs. I also perform all phases of residential construction. This includes framing, siding, roofing, hanging dry wall, taping, texturing, and painting. I also do tile work, decks, minor electrical and plumbing work. I hang doors and windows install cabinetry as well as build install laminated counter tops. I do finish trim work including custom trim work. Home Leasing Inc., Bozeman, Montana 01/06/18 – 04/04/20
- I worked by myself and preformed remodels on manufactured homes. This entailed all phases of construction, from demolition to framing, sheet rocking, taping and texturing. I also preformed electrical wiring and plumbing of water and sewer lines. I also installed windows and doors when needed. As well as installing base cabinets and upper cabinets, also building and installing laminate counter tops.
Bares Stove and Spa, Bozeman, Montana 05/01/12 – 09/20/17
- I was hired as a stove installer, after 6 months, I was promoted to Lead stove installer. As lead stove installer I had to look at the site inspection and job details. I estimated the type and size of pipe needed for ventilation. I then took the stove and piping to the job site, where I would install the stove. At times I needed to convert the stove from natural gas to propane. I would work with the homeowner or the contractor to determine placement of the stove and routing of ventilation pipe. This would be either through the walls or the attic and roof. I then would instruct my assistant on the plan and delegate which portion I needed him to complete. After installation I would test fire the stove to check for proper operation of stove and venting. I preformed a cleanup and informed our client of proper operating procedure. I also assured their satisfaction with the completion of our work. I also loaded and unloaded stoves and spas with the use of a fork lift. I did in shop plumbing repairs to used spas as well as installed new and used spas and the electrical connections for the spas. I also performed in the field diagnosis and repairs to new and used spas.
Elk Ridge Construction, Manhattan, Montana 03/06/06 - 05/01/12
- This is my own general contracting business. I run all aspects of this business. I handle all job prospects, figure and place all bids. I purchase any and all materials needed for said jobs. I also perform all phases of residential construction. This includes framing, siding, roofing, hanging dry wall, taping, texturing, and painting. I also do tile work, decks, minor electrical and plumbing work. I hang doors and windows install cabinetry as well as build install laminated counter tops. I do finish trim work including custom trim work. Sage Construction, Amsterdam, Montana 09/10/03 - 02/02/06
- All phases of residential construction. Foundations, framing, siding, roofing also hanging doors and windows. I installed cabinetry as well as built and installed laminated counter tops. I also did finish trim work. Worked unsupervised on a regular basis. Louisiana Pacific Saw Mill, Belgrade, Montana 09/10/96 - 09/05/03
- I initially started out working on the green chain, pulling and stacking boards by hand. While working I was trained and gained experience in many other aspects of the saw mill including several different jobs and different saw operations. I also gained experience running a 5 ton and 8 ton fork lifts as well as loading and unloading the drying kilns. I also learned to operate the computer program that started and shut down the drying kilns. In this position I worked unsupervised on a regular basis. Eventually I gained enough knowledge and experience to become the relief person on the night shift, this entailed relieving all personnel throughout the mill and being able to run their saw or position at normal operating speed. I eventually took over the prentice operator’s position feeding logs to the mill from the log loaders in the yard. I held this position until the mill closed its doors. Summary:
In the many years of my working life I have had several other jobs not listed above where I operated different types of machinery. I have been in charge of jobs and crews. I have always had an excellent rapport with co-workers, supervisors and customers. I feel that if hired I would be an asset to your company and would like the opportunity to prove myself to you. EDUCATION:
Manhattan Elementary, Manhattan, Montana 08/29/66 - 05/28/74 Diploma in - required courses
Manhattan High School, Manhattan, Montana 08/09/74 - 03/15/76 Required courses
Trapper Creek Job Corp., Darby, Montana 04/06/77 - 01/03/79 GED in High School courses, Apprenticeship Carpentry and Heavy Equipment operations.
- Honor Dorm recipient, Corpsman council member.
- Trained in Wild lands Forrest Fire Fighting, Trained in Camp tending for Fire Fighters. Entered United States Army National Guard.
MILITARY SERVICE:
United States Army 05/77 - 08/83
Rank: E-4 Premotable
Honorably Discharged: yes
HOBBIES:
Fishing, Hunting and Golf
REFERENCES:
Ken Kreitzer Amsterdam, Montana
Home: 406-***-**** after 6:00 pm
Kathie Bare Canyon Ferry, Montana
Home: 406-***-****
Stacy Paul Manhattan, Montana
Cell: 406-***-**** after 6:00 pm