Mechanical Engineer Seeking Senior Support Role

Piping Engineer Plant Design Engineer HVAC Piping Stress & Pressure Vessel

Engineer Project Engineer

Yesh Pal Singh

Tommerup, Denmark (Denmark’s permanent resident/Permanent opholdstilladelse) Der kræves ikke dansk visum eller arbejdstilladelse +45 53 22 56 65 *********@*******.*** https://www.linkedin.com/in/yesh-pal-singh-114a554 Professional Summary

B.Sc. Mechanical Engineer with many years in piping design, plant layout, piping stress analysis, pressure vessel design and project engineering across Oil & Gas, Refinery, Petrochemical, Biofuel, Carbon Capture, Biogas and Food Processing projects. Delivers FEED, detailed engineering and brownfield modification work in AVEVA E3D, PDMS, AutoCAD Plant 3D and AutoPLANT, with stress analysis in CAESAR II, ROHR2 and AutoPIPE and vessel design in PVElite and VVD. Applies ASME B31.3, EN 13480, EN 13445, PED, DNV and API standards. Experienced in vendor coordination, cost estimation, Refinery, onshore and offshore site surveys, and leading multidisciplinary teams in Denmark, Sweden, the Netherlands, the USA and the Middle East. Fluent in English; improving Danish.

Core Skills

• Piping & Plant Design: Piping design, plant layout, 3D plant modelling, plot plans, equipment layout, general arrangement (GA) drawings, piping isometrics, material take-off (MTO), P&ID and PFD review, piping specifications, piping class, as-built field survey, point cloud and laser scan models

• Design Software: AVEVA E3D, AVEVA PDMS, AutoCAD Plant 3D, Bentley AutoPLANT, OpenPLANT, OptiPlant, Autodesk Inventor, Navisworks, MicroStation Projectwise, CADWorx, PDS, Plant4D, Autodesk Vault

• Software Administration: E3D administration, PDMS administration, AutoCAD Plant 3D project administration, specification building and customization, Bentley ProjectWise

• Piping Stress Analysis: CAESAR II, ROHR2, AutoPIPE, TRIFLEX, piping flexibility analysis, expansion joints

• Pressure Vessel Design: PVElite, Visual Vessel Design (VVD), SANT'AMBROGIO, Mathcad calculations, FEA/FEM with Autodesk Inventor

• Codes & Standards: ASME B31.3, ASME B31.1, ASME Section VIII, EN 13480, EN 13445, PED, DNV, API, CFR

• Project Engineering: FEED, detailed engineering, feasibility studies, cost estimation, CTR estimates, scope definition, engineering work packages, RFQ preparation, technical bid evaluation, vendor document review, procurement support, brownfield and greenfield modifications, construction and commissioning support, hazard analysis (PHA) participation, SAP-PS

• Industries: Oil & Gas (onshore and offshore), refinery, petrochemical, biofuel, carbon capture (CCUS), biogas upgrading, Bio-LNG, power plant, dairy and powder processing, animal feed, brewery, HVAC and building services Professional Experience

Piping Engineer Kalundborg Refinery, Kalundborg, Denmark July 2023 – Present

• Lead new projects and modifications of existing refinery units, producing 3D piping layouts and fabrication isometrics in AVEVA E3D

• Work on modifications of an existing refinery (brownfield) using E3D 3D models Lead Engineer, Plant Design – Carbon Capture & Biogas AIRCO Process Technology, Fredericia, Denmark September 2022 – June 2023

• Led design and engineering of amine-based CO2 capture (CCUS) plants for power plants, waste incinerators, cement and industrial CO2 sources

• Designed water-based and amine-based biogas upgrading plants and Bio-LNG biomethane liquefaction pretreatment, including a trace CO2 and H2O polisher

• Prepared proposals and detailed engineering for new plants and modifications to existing facilities

Project Manager (Sales) & Head of Design Department Belman A/S, Esbjerg, Denmark June 2022 – August 2022

• Managed expansion joint projects from customer enquiry and technical design through pricing, sub-supplier procurement, order confirmation and invoicing

• Led plant surveys and design reviews of existing layouts; key project: Metering Station for Equinor's Mongstad Refinery

Mechanical Piping Engineer / Project Engineer (consultant assignments) Stensbo Engineering ApS, Tommerup, Denmark February 2015 – April 2022

• Designed and calculated pressure vessels with PVElite, VVD and Mathcad; performed FEA/FEM stress analysis in Autodesk Inventor

• Performed piping stress analysis in ROHR2 and 3D piping layout, specification building and project administration in AutoCAD Plant 3D

• Delivered piping and plant design for refinery, oil storage, power plant, dairy, biofuel, wood-tar creosote and egg processing clients in Denmark, Sweden, Norway, Italy, the Netherlands, Ireland and the USA (see Selected Projects)

• Applied EN 13480, EN 13445, ASME B31.3 and ASME Section VIII Piping Engineer ATKINS, Esbjerg, Denmark June 2013 – January 2015

• Defined scope of work and prepared engineering work packages for North Sea oil and gas clients MAERSK Oil and Gas and DONG Energy

• Carried out onshore and offshore site surveys and checked 3D models in a multidisciplinary CAD environment using AutoPLANT and Navisworks

• Performed piping stress analysis in TRIFLEX and CAESAR II Project Engineer / Plant Design Engineer ANDRITZ Feed & Biofuel A/S, Esbjerg, Denmark October 2010 – May 2013

• Defined project scope, prepared RFQs and evaluated vendor quotations for technical adequacy, budget and client requirements (silos, bins, elevators)

• Reviewed and approved vendor documents; prepared technical specifications and data sheets for pellet mills, hammer mills, conditioners, screws and conveyors

• Produced cost estimates and technical calculations; supported construction work packages and on-site construction

• Built 3D plant models in PDMS and Inventor; used Autodesk Vault, SAP, point cloud scans and Navisworks for model review

Piping Engineer ATKINS, Esbjerg, Denmark September 2008 – October 2010

• Performed offshore and onshore surveys for MAERSK Oil and Gas in the Danish North Sea

• Developed and checked 3D models in AutoPLANT and Navisworks Piping Engineer Pentair (Haffmans BV), Venlo, Netherlands May 2008 – September 2008

• Produced PFDs, P&IDs, plot plans, piping sections, isometrics and MTOs, and manufacturing drawings for pressure vessels, foam separators, gas washers and CO2 compressors in Plant4D and AutoCAD

Engineering Manager ASD Global, San Francisco, CA, USA November 2007 – April 2008

• Led an engineering team building OptiPlant 3D models for cost estimation, preliminary engineering, FEED and detailed engineering

• Coordinated day-to-day engineering between ASD and international clients and gave technical design support

Layout Engineer Jacobs Engineers, Long Beach, CA, and Anvil Corporation, Bellingham, WA, USA (via TalentBurst) February 2007 – November 2007

• Led refinery piping layout for BP's Carson (Los Angeles) and Cherry Point

(Bellingham) refineries using CADPIPE, AutoCAD, REBIS and Bentley AutoPLANT

• Prepared PFDs, P&IDs, plot plans, piping sections, isometrics and MTOs for refinery piping, pipelines and pump stations

Mechanical Piping Engineer Burren Resources Petroleum Ltd. (ENI), UK and former USSR region June 2006 – January 2007

• Supported preliminary and detailed design; reviewed designs against industry codes, safety requirements and project objectives

• Prepared construction permit applications, evaluated tenders for engineering, construction and equipment suppliers, and followed up procurement Systems Engineer / Plant Layout Designer Union Carbide Corporation / EQUATE Petrochemical Company (Dow joint venture), Houston, TX, USA and Kuwait March 1997 – June 2006

• Designed piping layout and process systems for Ethylene, Ethylene Glycol, Polyethylene, Polypropylene and Utility plants of a petrochemical complex in Kuwait

• Produced equipment layouts, GA drawings, P&IDs, PFDs, isometrics, plot plans and MTOs in MicroStation, PlantSpace P&ID and ProjectWise

• Maintained piping specifications and standards modifications in the Technical Methods and Standards (TMS) system

Assistant Project Engineer / Project Estimator / Mechanical HVAC Designer BMB Group of Engineering, Kuwait July 1993 – January 1997

• Designed HVAC, chilled water plants, process and mechanical piping, plumbing and fire protection systems for industrial and building projects

• Prepared cost estimates, managed design quality, schedules and budgets, and coordinated with electrical, fire protection and construction teams Trainee Engineer Hyundai Engineering & Construction September 1990 – June 1992

• Prepared HVAC, plumbing and fire protection designs and drawings for commercial and multi-story buildings

Selected Projects

• Crude Oil Import/Storage Facility, Statoil Depot Aalborg, Denmark (Bladt Industries A/S): Lead Piping Engineer, plant renovation, 2016 – 2018

• Oil Refining Facility, Scanpole, Norway (Moldrup): Plant/Piping Design Engineer, 2018

• Boiler and Power Plant, Kalundborg, Denmark (Kemp & Lauritzen A/S for Ørsted): Lead Piping Engineer, 2018 – 2019

• Dairy Drying and Powder Processing Plants (GEA Process Engineering A/S): FrieslandCampina Borculo T8, Netherlands, and Dairygold Mallow II, Ireland, 2019

• Central Utility Building, European Spallation Source, Lund, Sweden (Rörkraft for E.ON Värme Sverige): detailed piping engineering, 2019

• Biothelys Plant (Krüger/Veolia, Denmark): 3D plant design, specification building and pipe stress analysis, 2020

• Egg Treatment Plant (Sanovo Technology Italia): plant design, AutoCAD Plant 3D specification building, 2020

• Wood-Tar Creosote Processing Facility, USA (Moldrup/Koppers Global Technology Center): plant design, 2020 – 2021

• Boiler Feed Water, Steam and Condensate Piping, HBT Högbytorp, Sweden

(Rörkraft Öst AB, for E.ON): detailed engineering, 2021

• Metering Station, Mongstad Refinery, Norway (Belman for Equinor): site survey and design, 2022

• Petrochemical Complex, Kuwait (Union Carbide / EQUATE): Ethylene, Ethylene Glycol, Polyethylene, Polypropylene and Utility plants Education, Certifications & Training

• B.Sc. Mechanical Engineering (Mechanical Design), India, 1990

• Project Management (XLPM), Sweden, 2011

• Microsoft Certified Systems Engineer (MCSE), 2000

• AVEVA PDMS Training, Houston, TX, USA, 2007

• Autodesk Inventor Training, Herning, Denmark, 2011

• ASME Courses: Introduction to Piping Systems and Process Equipment; Layout of Piping Systems and Process Equipment, USA, 2002

• Bentley MicroStation, Reprographics, P&ID, Everything 3D, ProjectWise and PlantSpace P&ID training, 1997 – 2001

• Diploma in Computer Aided Designing, Computel Systems & Consultants, New Delhi, 1992

• Basic Offshore Safety Training including HUET, Falck Nutec, Esbjerg

• Root Cause Analysis, Apollo Associated Services, USA, 1998

• RSO Certified, Los Angeles Refinery Safety Overview Professional Memberships

• ASME (American Society of Mechanical Engineers), Associate Member

• NACE (National Association of Corrosion Engineers), Individual Member

Contact this candidate