Sr. Technician

RESUME

Todd Michael Kunselman

*** *. ****** **. #****, Lakewood, Co. 80226 720-***-****

**************@*****.***, *********************@*****.***

JOB OBJECTIVE

Sr. Technician-A challenging technical position with the opportunity for growth.

WORK EXPERIENCE

Facility Engineer, ISR Specialist, Sr. Operations and Intelligence Officer: CIA Blackwater XE Academi (6/95-7/22)

Performed 3, 4, 6, 9 and 12-month contracts in Central America, Africa and Afghanistan. Responsible for FOB

facility maintenance, operations and satellite communication systems. Resigned as a Sr. Operations Captain

and Command Duty Officer. My retirement position title was Satellite and Communication Systems Specialist.

Maintenance: EPS management - Diesel genset, PV array, electrical installation-distribution, micro-grid.

UPS, BAS, HVAC, security systems, fire alarm systems, RF-Satellite communications.

Operations: Critical facility and data center operations, shipping-receiving-warehouse management,

requisition of parts, supplies, fuel and ordinance, logistics management, expense

reporting. Quality Assurance Technician and Coordinator. Quality management systems

(QMS) and QA compliance enforcement. CMMS, PC and computer network management.

Intelligence: Responsible for the position(s) of Auditor, Analyst and Technical Specialist. Installed

tested, repaired and commissioned highly sensitive equipment. Specialized in remote

power, building automation systems (BAS), RF satellite surveillance and terrain swath

imaging systems. Supervised Technicians in the use of RF, UV, IR and LIDAR equipment.

Environmental and Functional Test Technician (contract): Lockheed Martin (SSC), Littleton, Co. (9/16-1/17)

Responsible for the functional test of space flight hardware. Performed functional and acceptance test,

thermal, vibration, vacuum test and documentation on PCB's, subassemblies and final assemblies. Operated,

monitored and maintained large thermal chambers (and associated test sets) in order to stress test space

flight hardware. The product line was AC-DC power supplies and control systems used on the Orion spacecraft.

Senior Development Technician: Covidien Corp. (Medtronic), Kelly Services, Boulder, Co. (6/09-7/10, 9/13-7/14)

Responsible for prototype development on medical electronic instruments. Built and modified prototype SMT

circuits, sub-assemblies and pilot build final assemblies. Performed design verification and validation testing,

updated schematics and generated protocols, test procedures and bill of material (BOM) as needed. Verified

clinical and regulatory compliance to ISO13485:2003 and EN, UL, IEC, IEEE 60601-1 standards.

Senior Research and Lead Technician: National Renewable Energy Laboratory (NREL), Golden, Co. (9/07-5/09)

Responsible for the test and evaluation of AC power distributed generation, storage and interconnection

systems. Conducted experiments using PV array, battery, inverter, wind turbine and vehicle to grid (V2G)

distributed energy resources. Generated test plans, test reports and safe operating procedures per DOE

requirements. Acted as facility Lead Technician and Project Manager on multiple renewable energy projects

and experiments. Updated AutoCAD and MS Visio drawings to document project build and facility upgrades.

Performed apprentice electrician level installations using circuit breakers, contactors, relays, enclosures and

conduit per NEC, UL1741. Operated and maintained NREL SCADA systems, control panels and switchgear.

Technician (Snowmaker)-Pumps & Compressors: Diamond Peak Ski Area, Incline Village, NV. (11/03-2/07)

Seasonal maintenance and adjustment of ski area snowmaking computer system. Controlled pumps, fans,

compressors and water tank levels to optimize snowmaking efficiency. Operated, monitored and maintained

SCADA (Supervisory Control and Data Acquisition) system 24-7 on call. Supervised multiple snowmaking

teams to produce and distribute snow in order to provide effective slope coverage and maintenance. Updated

PC, PLC and RTU hardware-firmware. Repaired sensors, air-water pipes, VFD and HVAC systems per UL508.

Senior Manufacturing Technician, Jr. Quality Engineer: Fluke Biomedical Corp., Carson City, NV. (8/02-9/03)

Responsible for providing technical support to the Engineering, Operations and Quality Manager. Validated,

configured and installed automated hardware and test systems. Setup, validated Kaizen manufacturing cells

per 5S, Six Sigma, ISO and JIT principles and standards. Supervised Technicians and Assemblers to improve

manufacturing productivity and reliability. Performed ISO9001:2000 assessments, generated and reviewed

engineering change orders and resolved corrective action reports. Ensured EMC and electrical safety

compliance, FDA submittal, FDA audit resolution and product specification documentation.

Senior Electronics Engineer Technician: Kopin Corporation, Scotts Valley, Ca. (10/01-8/02)

Responsible for prototype development and small production runs for corporate marketing group.

Breadboard and debugged new products from pilot to production unit. Designed and built test fixtures and

complex test sets to evaluate component and system level performance. Product line is smart phone LCD's.

Senior Engineering Technician: Exabyte Corporation, Boulder, Co. (6/00-3/01)

Responsibilities included EMC compliance, design verification test (DVT) and P.C. network administration.

Performed DVT failure analysis and resolution by evaluating protocols, programming scripts and testing new

firmware. Evaluated SCSI, fiber channel and gigabit-ethernet Enterprise tape drive library systems for data

integrity, longevity and robustness. Maintained Product Test group's array of Windows 98, NT based PC’s.

Electronics Engineer: Cielo Communications Inc., Broomfield, Co. (3/99-3/00)

Involved in all aspects of fiber optic transceiver design, test and characterization for new GBIC product

line. Responsibilities included BOM and work order generation, design verification test and evaluation of

components and subassemblies for suitability in the application. Directed production staff to build customer

samples and pilot runs in preparation for volume manufacturing. GBIC (Giga-Bit Interconnect)-RX, TX laser.

EMC and Electrical Safety Test Technician, Associate Engineer: TUV Product Service, Boulder, Co. (1/96-3/99)

Design and Development Technician IV: Ball Aerospace Systems Group, Broomfield, Co. (7/88-6/95)

Microwave Technician: Watkins-Johnson Company, Scotts Valley, Ca. (6/86-5/88)

SOFTWARE

MS Word, Excel, Visio, Project, PowerPoint and Access, AutoCAD, OrCAD, Solidworks, Altium, LabView, KNX

BACnet, Modbus, LonWorks, ASEM 6300, Niagara WEBs N4, Desigo CC, Agile, SAP, Oracle and SQL database

MatLab, CMMS, Jira, CxAlloy, Procore, SharePoint, MS Windows 7, 8, 10, 11, Linux, Unix and Mac OS. Python.

EQUIPMENT

RF\optical spectrum and network analyzer, power meter\analyzer, electrical safety analyzer, protocol analyzer,

logic analyzer, electronic\passive load bank, grid simulator, analog\digitizing oscilloscope, bit error rate tester,

RLC meter, thermal & vibration test chamber, DC, single, 3-phase motor and generator, fiber optic and light wave

equipment, scientific test equipment, biomedical test equipment, hydraulic and pneumatic equipment, DDC-PLC

controlled equipment, heavy equipment (snowcat, forklift, grader, backhoe, crane), MIG & oxy-acetylene welding,

BAS, CNC, mill, lathe, SMT-PCB assembly, BESS-PV, micro-grid, CMM, AOI, RF-OTDR, LIDAR, VFD, iPad.

EDUCATION

AS degree in Electronics Technology, Santa Rosa Junior College, Santa Rosa, Ca. (9/84-6/86)

OTHER

Experienced in UL\CSA\NFPA electrical safety, FCC\EN\EU radiated emissions and immunity (EMC) standards.

Experienced in Siemens, Honeywell, JCI, GE, B&R and Allen Bradley HVAC, SCADA, BAS and PLC systems.

BAS, GD&T, P&ID, SAMA, ISA drawings; ERP, MRP & DFM training, Apprentice Electrician - State of Colorado.

6 Sigma green belt, 5S, Std. Work, JIT, Lean, TQM, 8D, 5 Why's, FMEA, PPAP, SPC, RCA, GAMP5 and CGMP.

ISO 9001:2015, ISO 9001:2000 Internal Auditor, AS9100D, IPC-A-610, IPC-WHMA-A-620 class 2, J-STD-002.

Contact this candidate