Mechanical Plumbing Technician
Resume:
GEORGE WAFULA SIKUKU
+254********* •KENYA•
+971*********. UAE
***************@*****.***
****************@*****.***
SUMMARY
Dynamic Plumber with over 8 years of hands-on experience in plumbing systems. Skilled at installing, repairing, and maintaining plumbing fixtures and drainage systems, ensuring compliance with plumbing codes. Achievements include effective leadership in supervising projects and maintaining safe work environments. Proven ability to adapt to diverse challenges while ensuring high-quality service delivery. Looking to contribute expertise to a collaborative team environment. WORK EXPERIENCE;
PLUMBER, ENOVE BY VIOLA (UAE)
01/03/2026 to date
ROLES/SKILLS
. Chilled Water Systems: Specialists in servicing and diagnosing an air conditioning system comprised of chilled water, air-handling units (AHUs) and fan coil units (FCUs) which are Chilled Water Systems: Specialists in servicing and diagnosing an air conditioning system comprised of chilled water, air-handling units (AHUs) and fan coil units (FCUs) which are prevalent in the Middle East for high-rise
. Evacuation and charging of refrigerants (R-22, R-410A) per strict codes on environmental and safety standards.
. Knowledge of brazing & soldering of copper tubing and piping of HVAC refrigerant lines and domestic hot water systems with zero leakage/VRF.
. Diagnosing and servicing Variable Refrigerant Volume/Flow (VRV/VRF) systems common in modern buildings in Africa for commercial use and GCC villas.
. Expert-level pipe joining skills with PPR, uPVC, HDPE, PEX and pipe butt-welding and electrofusion pipe joining machines.
. Drainage & Venting Design: Sizing and installation of complex above- and below-ground drainage piping, floor traps, manholes and condensate drain pipes. Pump. Maintenance and repair of centrifugal pumps, booster pumps, transfer pumps and submersible sump pumps.
. Reading the electrical schematic and troubleshooting the control circuits, motors, contactors, relays, and compressor.
. Ability to read and understand complex architectural drawings, isometric plumbing and HVAC ducting diagrams. Regional
. MEP Codes & Compliance: Expert knowledge of the regional municipal regulations (e.g., Dubai Municipality, DEWA standards in UAE) and the ASHRAE standards or local equivalents for Africa and the GCC standards.
. Piping, programming and troubleshooting Building Management Systems (BMS), smart thermostats and automatic HVAC sensors.
. Performing systematic scheduled maintenance throughout multi-site properties or high rises, to extend the life of equipment and optimize energy efficiencies.
‘ Be able to train junior staff, manage spare parts stock, and record daily service logs as a Lead Technician, Charge Hand or Supervisor.
prevalent in the Middle East for high-rise
. Evacuation and charging of refrigerants (R-22, R-410A) per strict codes on environmental and safety standards.
. Knowledge of brazing & soldering of copper tubing and piping of HVAC refrigerant lines and domestic hot water systems with zero leakage/VRF
. Diagnosing and servicing Variable Refrigerant Volume/Flow (VRV/VRF) systems common in modern buildings in Africa for commercial use and GCC villas.
. Expert-level pipe joining skills with PPR, uPVC, HDPE, PEX and pipe butt-welding and electrofusion pipe joining machines.
. Drainage & Venting Design: Sizing and installation of complex above- and below-ground drainage piping, floor traps, manholes and condensate drain pipes. Pump. Maintenance and repair of centrifugal pumps, booster pumps, transfer pumps and submersible sump pumps.
. Reading the electrical schematic and troubleshooting the control circuits, motors, contactors, relays, and compressor.
. Ability to read and understand complex architectural drawings, isometric plumbing and HVAC ducting diagrams. Regional
. MEP Codes & Compliance: Expert knowledge of the regional municipal regulations (e.g., Dubai Municipality, DEWA standards in UAE) and the ASHRAE standards or local equivalents for Africa and the GCC standards.
. Piping, programming and troubleshooting Building Management Systems (BMS), smart thermostats and automatic HVAC sensors.
. Performing systematic scheduled maintenance throughout multi-site properties or high rises, to extend the life of equipment and optimize energy efficiencies.
‘ Be able to train junior staff, manage spare parts stock, and record daily service logs as a Lead Technician, Charge Hand or Supervisor.
PLUMBER, CAMP BEUHRING(V2X/KRH), Kuwait
02/2023 – 11/2025
Delivered comprehensive plumbing services across all company satellites, ensuring the efficient installation and repair of pipes, as well as managing water supply in greenhouses while maintaining drainage systems.
Oversaw site operations with effective supervision and leadership, ensuring high-quality standards and adherence to protocols.
Executed assembly and installation of various plumbing systems according to specifications, applying relevant plumbing codes and regulations.
Installed and repaired valves and pipes, utilizing different materials and methods such as welding, ensuring secure connections with no leakages.
Identified and marked positions for pipe installations, utilizing tools like levels and plumb bobs to ensure precision in construction.
Installed and repaired plumbing fixtures, including sinks, commodes, water heaters, and dishwashers, to maintain functionality and efficiency.
Maintained proactive communication with supervisors and colleagues to foster collaboration across departments.
Completed administrative responsibilities including inventory management, material ordering, and preparation of reports.
Analyzed building plans and technical drawings to determine necessary tools and equipment for plumbing installations.
Fulfilled additional tasks as assigned, demonstrating flexibility and a commitment to team objectives.
Managed general supervisory duties and responsibilities to ensure team productivity. plumbing, AFRICAN STEEL PIPE COMPANY, Kenya
10/2020 – 02/2022
Reported directly to the general foreman, receiving guidance and instruction for operational effectiveness.
Championed a safe working environment, upholding safety as the highest workplace priority.
Delivered a complete range of plumbing services across various company sites, ensuring the installation and repair of piping and drainage systems were executed to the highest standard.
Provided supervision and leadership, enhancing team dynamics and productivity through effective oversight.
Executed assembly, installation, and repairs for plumbing systems, following industry codes and specifications diligently.
Managed the assembly and installation of HVAC piping systems, including welding operations as required to maintain system integrity.
Conducted inspections of structures to identify potential obstructions that could detract from structural integrity during pipe installation.
Marked and located positions for pipe installations, employing precision tools for accuracy in wall and floor fittings.
utilized a variety of hand and power tools to modify openings in walls and floors to accommodate plumbing systems, employing safety and efficiency.
Joined metal and non-metal pipes using various methods, testing systems to ensure reliability and no leakages post-installation.
Installed and repaired a wide array of plumbing fixtures, ensuring proper functionality of sinks, commodes, water heaters, and similar appliances.
Conducted repairs and maintenance on pool systems, ensuring equipment such as filters and pumps were operational and efficient.
Executed plumbing repairs, replacing faulty washers and addressing clogged drains to ensure uninterrupted water flow.
Reviewed building plans and blueprints, determining tools and equipment needed for successful installations.
Fostered effective communication and interaction with colleagues and supervisors to uphold team cohesion and support other organizations.
Executed additional administrative tasks including inventory management and report generation. PLUMBER/MECHANICAL ENGINEERING, PLUMBER, Kenya
08/2018 – 09/2022
Installed a variety of plumbing fixtures, ensuring seamless operation of sinks, commodes, water heaters, garbage disposal units, and related equipment.
Executed repairs and maintenance on swimming pool equipment, such as sand filters and pumps, while reviewing working drawings for tool and equipment requirements.
Conducted plumbing repairs by replacing washers, fixing leaks, and unblocking drains to restore full functionality.
Interpreted building plans and working drawings to determine necessary tools and equipment for plumbing work.
Maintained effective communication with colleagues, supervisors, and support organizations to ensure collaboration and project success.
Performed various administrative duties, including inventory management and material ordering, while preparing schedules and reports.
Fulfilled supervisory duties and responsibilities, guiding team operations throughout plumbing projects.
Assembled, installed, and repaired systems for heating, water, and drainage, strictly adhering to plumbing codes.
Managed the installation and maintenance of HVAC piping systems, ensuring specifications were met and welding performed as necessary.
Conducted inspections of structures to identify obstructions, safeguarding the integrity of the installation process.
Utilized hand and power tools for precise openings in walls and floors to facilitate plumbing installations.
ASSISTANT PLUMBER, ISINYA FEEDS, isinya, Kenya
10/2016 – 07/2018
Provided essential supervision and leadership within team operations, contributing to operational effectiveness.
Assembled, installed, and repaired heating, water, and drainage systems in accordance with established plumbing codes.
Executed installations and repairs for HVAC systems, including welding, as required by project specifications.
Conducted structural inspections to identify and mitigate potential obstructions during installation processes.
Marked and located positions for plumbing connections, utilizing precision tools such as spirit levels and plumb bobs.
Used hand and power tools efficiently to create openings in walls and floors for the installation of pipes and fittings.
Installed and repaired a range of plumbing fixtures, ensuring reliable operation of sinks, commodes, and water heaters.
Maintained and repaired pool equipment, ensuring optimal functioning of sand filters and pump systems.
Conducted plumbing repairs by replacing washers and unblocking clogged drains to keep plumbing systems operational.
Reviewed building plans to determine the necessary tools, equipment, and installation sequences.
Fostered effective communications with colleagues, supervisors, and support organizations to enhance operational synergy.
Executed various administrative tasks including inventory management and report preparation. PLUMBER/MECHANICAL ENGINEERING, CARE-WORLDWIDE-SOUTH SUDAN, kenya 07/2014 – 10/2016
Inspected structures to identify obstructions that could compromise structural integrity during installation of plumbing systems.
Marked and located pipeline passage holes in walls and floors, ensuring accuracy in connection positions.
utilized hand and power tools effectively to create openings for pipe installations, applying safe operational practices.
Assembled and installed various plumbing components, employing secure methods for joining pipe, and conducting tests to ensure no leakages.
Installed and repaired plumbing fixtures, ensuring functionality across sinks, commodes, and hot water systems.
Maintained and repaired pool equipment, including sand filters and associated systems, ensuring them to be operational and safe.
Conducted plumbing maintenance by replacing washers and rectifying clogged drains to ensure continued system performance.
Reviewed building plans and technical drawings to outline requirements for tools and installations.
Cultivated timely and effective communication with team members and supervisors to maintain a supportive work environment.
Handled administrative tasks including material ordering and inventory management responsibilities.
PLUMBER, PORINI EMGINEERING COMPANY, isinya, Kenya 03/2011 – 06/2014
Ensured a safe workplace by prioritizing safety protocols in all operational practices.
Delivered a wide range of plumbing services under the direction of the facilities manager, providing installation and repair of pipes and drainage systems.
Provided team leadership and oversight to enhance service delivery and operational efficiency.
Executed assembly and installation of plumbing systems in compliance with plumbing codes and specifications.
Managed the installation and maintenance of HVAC piping systems, including necessary welding operations to assure operational effectiveness.
Conducted inspections of structural installations to identify potential issues that might compromise integrity.
Marked connection points and holes for pipe installations accurately using professional tools for measurements.
utilized hand and power tools for effectively cutting openings in structures to facilitate plumbing integration.
Assembled and tested pipe joints, ensuring secure and leak-proof fittings by applying appropriate joining methods.
Installed and repaired various plumbing fixtures ensuring reliable performance, including sinks and water heaters.
Conducted maintenance of pool equipment, addressing filtration and pump functionality to optimize operations.
Performed plumbing repairs by replacing faulty components and ensuring drain systems operated without blocks.
Reviewed construction plans to determine necessary tools and supplies for installations, ensuring preparedness and efficiency in operations.
Maintained effective communication with team members, supervisors, and other organizational stakeholders to sustain project progress.
EDUCATION
. CERTIFICATE IN PLUMBING, NATIONAL YOUTH SERVICE TECHNICAL COLLEGE MOMBASA KENYA, nairobi, Kenya
02/2014 – 01/2017
. Trades, Plumbing, NEW LIFE COMPUTER CENTRE TRAINING, nairobi, Kenya 05/2010 – 02/2011
. HIGH SCHOOL CERTIFICATE, ST AUGUSTINE LUKHUNA HIGH SCHOOL, Nairobi, Kenya 03/2006 – 01/2010
SKILLS
Plumbing
Mechanical Engineering
Welding
Piping Systems
HVAC
Drainage Systems
Leadership
Communication
Organizational Skills
Time Management
Teamwork
CERTIFICATES
CERTIFICATE IN PLUMBNG
NATIONAL YOUTH SERVICE TECHNICAL COLLEGE MOMBASA
2017
GRADE TEST iii
NITA
GRADE TEST ii
NITA
GRADE TEST I
NITA
Contact this candidate