MARSHALL J. SMITH
Danvers, MA 01923-9551 mailto:*******@*****.***
SUMMARY
Over 40 years of experience encompassing all aspects of manufacturing: CPD, NPI, Lean, Design, Manufacturing, Purchasing, Machining, Fabrication, Quality, Inspection, Shipping and Packaging as well as Customer Support and Implementation.
PROFESSIONAL ASSOCIATION
Senior Member SME, Certified ISO 9001 Auditor, Six Sigma Green Belt
EXPERIENCE
DJ Fabricators, Ipswich, MA 2012 - Present
GM/Sr. Mfg. Engineer
As acting General Manager I conducted hardware and software evaluations as well as manufacturing processes and procedures. After completion of the evaluations I upgraded the servers so that they were robust enough to handle the selected upgraded software packages. These software platforms included Shoptech E2 software for customer specific quoting and job orders. Metamation a CAM (computer aided machining) software for posting jobs to an Amada 4000W Co2 laser cutting tool and Finn Power punch machine. PTC Creo a CAD (Computer aided design) solid modeling software and Windchill PLM (product lifecycle management) tool. Additionally, I added Solidworks to the CAD mix due to a diverse software customer base.
Typhouse, Encinitas, CA 2012 - Present
Sr. Mfg. Engineer, Deploying CPD & NPI
Design consultant tasked with product development geared towards new product production ramp up, cost, quality and manufacturing processes.
Varian, Gloucester, MA 2004 – 2012
Sr. Mfg. Transition Engineer/DFx/NPI/CPD
As the Sr. Manufacturing Transition Engineer I work closely with product development teams to ensure that the hand-off to production occurs as smoothly as possible in a fast-paced environment. Utilizing tools and methods such as CPD, (Concurrent Product Development) BKM, (Best Known Methods) Lean and DFX I transitioned products from concept to production while accomplishing this mission faster, better and cheaper. My duties included and were not limited to:
Evaluate and improve component Design for Manufacturability and Design for Assembly. Working with Product Development Engineers and upstream marketing teams.
Review and approve documentation for manufacturing concerns.
Provide manufacturing support for development engineering prototype builds, including developing assembly instructions, fixtures, line layout, and tool requirements.
Responsible for generation and management of product bill of material.
Manage build timing to meet aggressive project schedules.
Instrumental in upstream marketing process and providing feedback (BKM’s) to design teams.
Evaluate potential component manufacturers and product integrators to evaluate new component designs and suggest improvements and provide technical evaluations of supplier capabilities to reduce cost, reduce delivery time, and improve quality.
Responsible for low volume prototype production ramping up to full production.
As the Sr. Manufacturing Engineer for the NPI group. My role was one of a DFX analyst. I attended all phases of new product development as it transitioned from conception to production. I was a “champion” on a new program called CPD (Concurrent Product Development). This program was aimed at streamlining the developmental process necessary to bring a new product to market. Working with engineers and designers we collaboratively developed designs that move from one phase of the process to the next. I was also responsible for managing a group of engineers and designers that resided in India. This independent company was part of the out-sourcing initiative. Prior to my last position I was the Pack and Ship Engineer. My previous employer hired a new engineer to take over this position but I still stayed active in the process during my entire tenure on a consulting basis. As the former Pack and Ship engineer I would determine best practice packaging and processes for each product line and module. I audited material disposition and flow line processes as they impacted the packaging and shipping function. I reviewed existing packaging for improvement in design and reduction in procurement and processing costs.
D.J. FABRICATORS, Ipswich, MA 2004 – 2005
Sr. Mechanical Designer/Mfg. Engineer
I was responsible for incoming inspection. Utilizing standard inspection equipment I would inspect parts for their dimensional conformance as well as its respective drawing. I would perform tolerance analyses and check drawings to ensure dimensional integrity, drawing practices and standards were met.
KAISER SYSTEMS, Beverly MA 2001 - 2004
Sr. Mechanical Designer, Sr. Mfg. Engineering
I worked directly with engineers, PCB designers, and R&D assemblers creating high voltage power supplies used in the medical and non-medical x-ray industry. Created layouts, assembly models and associated assembly and detail drawings. Most designs required sheet metal enclosures or castings, cold plates, heat exchangers, fans and miscellaneous hardware. The following is a partial list of ground-up designs I completed.
160Kv Power supply for AS & E
Cap-charger for VISX Corp.
180Kv Power supply for Invision
Multi-function power supply for Raptor
Upon completion of the drawings I would procure all of the mechanical components and work closely with outside vendors during the machining process and often define the method of manufacture. Once the project was released into production I would develop the supply chain and manage first article builds. Proficient in material selection, coatings, hardware and manufacturing and machining methods including but not limited to welding, brazing, heat treating, sheet metal fabrication, and castings.
AXCELIS TECHNOLOGIES INC., Beverly, MA 1994 - 2001
Sr. Mechanical Engineer/Sr. Mfg. Engineer, Operations
Managed the support services and facilities design group for a recently acquired company (TPS). This required integrating a garage shop organization into a class 10K clean room and transforming the company into a world class manufacturing organization. My responsibilities covered a broad spectrum of activities and functions including but not limited to successfully completing the following:
Managed the coordination of space planning, layout and facility expansion and relocation.
Managed the design of the manufacturing area and interfaced with all associated tradesman.
Defined and purchased capital equipment (fork trucks too hydrogen tank farms).
Managed design and manufacturing processes and techniques involved in the introduction of new and cutting edge technology.
Defined and published manufacturing procedures
Conducted vendor audits and established design, manufacturing, and shipping processes and procedures.
Established alternative resources and qualified/certified new vendors.
In addition, as the manager of manufacturing engineering on projects, I interfaced with sales, marketing, engineering, technicians, buyers, planners and all the various support groups and vendors required to bring a new product to market on time and on budget. I approved all ECO’s, and “Redlines” necessary to increase quality and reduce cycle time on the next tool or next generation tool or product. I implemented Lean manufacturing, 5S and DFMA practices and Six Sigma programs. Some of my tooling and fixture designs included
Designed see through sheet metal test stand to study air-flow
Designed heat exchanger necessary to cool the backside of silicon wafers
Designed flow hood for mini-environment
Designed entire sheet metal enclosure for ion-implant tool
Designed prototype production components
Designed 300mm disk cart.
Working in Operations I was responsible for test stands, cell layouts, workstations and facilities. I would also create ECO’s and manage the “Redline Process” per ISO 9000 requirements.
Sr. Mechanical Engineer, Engineering 1994 - 1998
Reporting to the engineering manager of the “Wafer Handling” group I would design custom sheet metal enclosures and various electro-mechanical devices used in the wafer-handling portion of the tool. Some of my accomplishments:
Chassis design, electronic racks
Wafer “PEDS”
End station enclosure and baffle kits
Robotic Wafer Handling Assemblies
Chiller piping and routing
Various mechanical drives and mechanisms
As the Sr. Design Engineer I was responsible for all associated assemblies and sub-assemblies required to complete a first article build. I would work closely with manufacturing engineering and outside vendors to ensure form, fit and function criteria were met. I would develop present and future supply chain personnel and managed all areas of a project necessary to win final design approval. I interfaced with all groups necessary to bring a new product to market all while utilizing my Six Sigma training and implementing 5S, Lean Mfg. and DFMA practices. This allowed me to follow my design from conception through to the customer. Upon completion of a particular project I would work directly with the customer and coordinate all of the design upgrades and oversee the installation and customer acceptance procedures necessary to close out the account.
BOSTON BREWIN, Danvers, MA 1991 - 1995
Principal, Founder/Owner
I founded a retail home-brewing supply store. Sales increased annually by 40% until the business was sold. Company is now successfully operating in new location. Managed every detail associated with running a small business
CTI CRYOGENICS, Waltham, MA 1981 -1991
Manager Tooling Design, Operations
I managed a group of 11 engineers and designers whose sole purpose was to improve in-coming inspection yields and improve production cycle times. Utilizing go no-go gauge design and product specific tooling and fixtures we extended our efforts to vendors and suppliers. Working extensively with the supply chain I was highly successful in our transitioning to JIT practices. I would also perform extensive tolerance analysis and troubleshooting of production failures and recommend design changes. As a Sr. designer from 1982-1987 I supervised a group of designers and detailers involved in the development of a "Magnetic Resonance Imaging" (MRI) recondenser. I was responsible for the design and detailing of an advanced liquid helium temperature two-phase expansion engine. I introduced manufacturing techniques instrumental in completing the project. In addition to the expansion engine, the project included designing and fabricating an ejector, dry compressor, heat exchanger and all components for "Josephson Junction Airborne Advanced Computer System".
Atwood & Morrill, Salem, MA 1975 -1981
Sr. Designer,
I designed and managed detailers for A&M Main Steam Isolation Valves, “Y” Valves, Trip Throttle valves and all of the A&M gate valves were designed by myself on a consulting basis after I departed.
EDUCATION
NSCC Beverly, MA - ASME (cum laude)
University of Michigan - Accredited Courses: - Jig and Fixture Design – Tool Design
ANSI Y14.5 – Certified
Machine Design – Certificate
Machinist – Claude H. Patten Vocational Training
PATENTS
No. 4,708,165 “High Pressure Stepped Clearance Seal in a Cryogenic Refrigeration System".
.