SUMMARY Experienced and detailed-oriented License Mechanical Engineer with over thirty (30) years
expertise of in construction / commissioning / operation and maintenance work for Oil & Gas Refinery (Onshore & Offshore), Petrochemical Plants, Power Plants, Industrial Plants, Rotating Mechanical Equipment, and Heating, Ventilating & Air Conditioning, Waste/Water Treatment Plant, Overhead Head Transmission Lines, Civil Works, Piping Works, Roads and Bridges, and Structural Projects. I had been working overseas projects for over 20 years in different countries such as: Saudi Arabia, Qatar, The Netherlands, United Kingdom, Belgium, Germany, Russia, Myanmar, Malaysia and Singapore. From Project Engineer to Project Manager and from QC Engineer to QA/QC Manager, my experience in field execution includes; Safety Management, Piping / Structural Steel Fabrication & Installation, Mechanical Equipment Installation (static & rotating), Piping installation & design, Maintenance work, Quality Management & Inspections, Quality Documentation, Document control, Preparation of Quality Procedures, Testing of Welders, Quality Audits, Cost Estimates / Scheduling and Commissioning works, and Tendering. Familiar with International Standards like ASME/ANSI Codes, ISO, API, ASTM, AWS D1.1/D1.4/D1.5/D1.6, ACI, European standards, etc. WORK EXPERIENCE
03/2021 – 09/2026 Technical Quality Manager / Consultant Paranaque City, Philippines First Balfour
● Supported the Corporate Quality team in maintaining the Company Quality Management System under ISO 9001, ISO 14001, and ISO 45001.
● Assisted project tender teams with Project Quality Management Plans, ITP, Project Quality Risk and Opportunity matrix and other related quality documentation.
● Coached and trained project Quality Leads, Engineers and Inspectors to familiarize with international standards (i.e. ASME, API, AWS, ANSI and European Standards) related to their works assignments, and developed training materials.
● Provided support to Human Resources for technical interviews of project quality personnel applicants.
● Aided project quality personnel in troubleshooting quality issues and recommending corrective actions for non-conforming project work activities.
● Evaluated acceptance criteria against project specifications and applicable standards.
● Guided project quality management in quality inspections and the preparation of quality procedures, Project Quality Plans, and Inspection and Test Plans.
● Conducted project site visits to promote and verify the implementation of the Company Quality Management System.
● Assisted the Corporate Quality team during internal and external audits.
● Delivered technical assistance and conducted technical exchanges regarding welding and international standards including ASME/ANSI, ASTM, API, and AWS.
● Prepared Project Quality Plans and Inspection and Test Plans for tenders.
● Facilitated the preparation of method statements and Quality Risk and Opportunity documents.
● Provided technical assistance during tender meetings with tender teams and client representatives.
● Contributed to the preparation of other quality documents required for tender bid proposals.
● Assist project QA/QC Lead, Q/C Engineers and Inspectors in conducting welding WPS/PQR, WPQ testing and certification.
Ernesto L. Fabros
Makati, 1231, Philippines, 091********, *************@*****.***
● Involved projects included geothermal, combined-cycle, gas power plant, overhead transmission line, water treatment, piping, civil works, roads and bridges, and railway projects.
09/2015 – 07/2020 Project Manager Makati, Philippines CARAGA Renewable Energy Corporation
● Managed the CARAGA 23.5MWe Biomass Power Generation Facility Project to be constructed in Buenavista Butuan, Philippines.
● Authored the Owner’s Project Specification covering the design concept of the biomass power plant.
● Oversaw bid proposals from EPCC/Turnkey Contractors for the biomass power plant.
● Liaised with government agencies (i.e. DOE, DENR) regarding statutory requirements for the biomass power plant including permitting.
● Liaised with National Grid of the Philippines (NGCP) and Department of Public Works and Highways (DPWH) regarding requirements of the Connection Asset
(Transmission line from Biomass Power Plant to NGCP connecting grid Sub- station) for the biomass power plant.
● Coordinate and supervise the earth moving development for the biomass power plant
● Liaised with local suppliers of biomass fuel for the biomass power plants.
● Review and submit monthly safety reports required by DOE – Renewable Energy Board.
05/2009 – 08/2014 Deputy Site Manager / Quality Manager Singapore, Singapore
(Singapore Parallel Train Project)
Atlantic Projects Company Pte Ltd (APC)
As Quality Manager
● Directed projects and managed the Company Quality Management System.
● Supervised the compilation, presentation, and handover of quality records, documents, and test packs to the Client’s Engineer and Owner.
● Reviewed turnover package documentation, including as-built drawings, inspection records, calibration certificates, and Field Quality Plans.
● Coordinated quality inspections, document reviews, and site walkdowns, ensuring prompt closeout of punch lists.
● Reported quality progress and deficiencies to the APC Site Manager and proposed improvement plans.
● Conduct meeting for quality milestone, quality issues, and day to day quality activities with QA/QC Engineers and Inspectors in compliance with the client’s project specification.
● Authored technical queries to the client for resolution.
● Developed welding WPS/PQR, WPQ as per ASME IX & AWS D1.1 and QA/QC Procedures.
● Conduct Qualification of Welders and Certification as per ASME IX and AWS D1.1.
● Perform internal quality as required by the client’s specification.
● Attended QA/QC meetings with the Client and Owner.
● Ensuring the implementation of the Project Quality Plan, ITP, and Client/Owner quality requirements.
● Collaborated with the ExxonMobil Project Management Team to achieve zero or minimize backlogs of PWHT, NDT and test-packages within the target schedule.
● Oversee borescope internal inspections of pressure vessels and heat exchangers for corrosion.
● Liaised with the Singapore Ministry of Manpower representatives for statutory inspections.
● Review NDT procedures and NDT Technicians certification prior to submittal to the Client and Owner representative for approval.
● Review and assist NDT results and NDT schedules of weldments.
● After SPT Project in May 2013, APC assigned me in KSA Ras Al-Khair 2400MWe Gas Power Plant as Quality Consultant (Owner side) in collaboration with MA’ADEN Aluminum Company & Saudi Saline Water Conversion Corporation
(SWCC), providing guidance and expert advice on quality matters to the Main Contractor (Shandong Electric Power Company (SEPCO III) in collaboration with the owner consultants (POYRY). My role is primarily that of a senior advisor / consultant with responsibility for overall oversight of SEPCO III Quality Dept. to ensure compliance with contract QA specification & requirements. Assist, advice and provide assistance to SEPCO III to expedite the completion of the project to the required quality standard. Review Turn over Packages documentation prior to submission to the Owner Engineer (POYRY) for review and approval. This will include As-built drawings, Inspection records, calibration certificates, and compliance of the approved Field Quality Plan. Ensure that Quality inspections are scheduled in a manner that document review and walk downs can coincide and any Punch Lists generated during document review are closed out promptly. Report Quality Progress to APC Site Manager. Report to APC Site Manager any Quality deficiencies observed and recommend improvement plan for him to discuss with SEPCO III higher management. As Deputy Site Manager
● Assisted the Project Manager for project erection activities, work schedules and distribution of equipment and manpower, cost estimates, planning & scheduling, and project billing preparation.
● Authored method statements, safety tool box agenda, initiated technical queries, and participated in daily progress meetings with ExxonMobil and Stone
& Webster (Owner / Main Contractor).
● Led equipment preservation efforts, monitored records, and reported to the Client and ExxonMobil.
● Supported pre-commissioning and commissioning activities post-mechanical completion.
● Assist the Project Manager for weekly progress as required by the Owner and Main Contractor.
04/2007 – 02/2009 QA/QC Manager & Technical Representative / Venlo-Blerick, Netherlands Site Manager
HKB Holland Ketelbouw BV / Galen Technologies Pte Ltd (Joint Venture)
● Projects duties and responsibilities
For Sumgait Power Station, Azerbaijan, as project Manager & Quality Manager, was responsible for the erection/installation of the one (1) unit HKB water tube auxiliary boiler including all quality aspects for the project. Assist Pre-Com / Commissioning works of the Boiler after mechanical completion works. For SembCorp Utilities project, 4 x 30 t/h water tube HKB steam boiler in Wilton International Middlesbrough UK, as a Quality Manager was responsible for all quality aspects of the project and assist the Project Manager to conduct Safety Orientation course for all personnel entering the site to make them aware about the safety rules & requirements at site.
For the BFG-GENT Belgium Project, BFG Pre-Heater Module, as a technical representative was responsible for the inspection and joint inspection with the Client inspector of fabricated items before dispatch to the site. Prepare ITP’s and quality documents for submission to the Client representative for review and acceptance.
04/1996 – 03/2007 Senior QA/QC Engineer & Senior Mechanical/ Singapore, Singapore Piping Engineer
JURONG Engineering Limited and its group of Companies As Senior QA/QC Engineer
● Authored the JEL Maintenance Division Quality Manual in accordance with ISO 9001:2001 and served as Management Representative for ISO certification preparation.
● Maintained and controlled the Quality Manual and liaised with third parties for review, audit, and assessment.
● Produced quality procedures, managed non-conformance reports, managed qualified welders and WPS/PQR, performed site quality inspections, reviewed radiographs, scheduled PWHT, and maintained quality documentation.
● Attended periodic quality audits and coordinated with Client inspectors for joint inspections and acceptance.
● Liaised with Ministry of Manpower representatives for statutory inspections. As Senior Mechanical Engineer/Piping Engineer
● Executed tendering, quotations, and cost, labor, equipment, and material estimates.
● Supervised equipment erection and installation, shutdown works, manpower planning, scheduling, and vendor installation and commissioning.
● Participated in the commissioning and test-run operation and maintenance of two GE LM2500 gas turbines at Kuala Lumpur International Airport.
● Provided operational and maintenance support for two GE LM2500 gas turbines and associated equipment at Kuala Lumpur International Airport.
● Oversaw HRSG guillotine damper installation and assisted with two GE LM2500 gas turbine periodic inspections and hot gas path section repair intervals.
● Functioned as technical representative for JEL/ABB-USA chemical recovery boiler rehabilitation works.
● Managed piping projects installation and erection, NDT execution, commissioning, work scheduling, manpower distribution, and documentation. Inspection and supervision of pipeline installation, including structural supports.
● Supervised the rehabilitation works - installation of GE Frame 5 & Frame 6 gas turbine rotors, blades, shroud blocks, nozzles, bearings, combustion cans, and transition pieces through final casing closure in Myanmar for Myanma Electric Enterprise.
● Conducted commissioning, attended client progress meetings, and supervised site safety protocols for the rehabilitation works GE Frame 5 & Frame 6 gas turbine in Myanmar for Myanma Electric Enterprise.
● Projects included power stations, cogeneration plants, boiler installation and repair, shutdown maintenance, water treatment, chemical recovery boiler rehabilitation, gas turbine operation and maintenance, and gas turbine repair and recommissioning.
05/1995 – 04/1996 QA/QC Head Makati, Philippines
A. De Vera Corporation
● Managed the Company Quality Manual and served as keeper of the ASME stamps.
● Led the ASME Certification Renewal Audit, which was successfully passed.
● Developed QC procedures, including WPS and PQR.
● Supervised welder qualification tests.
● Prepared quality control plans and Inspection and Test Plans.
● Delegated quality work to quality supervisors and inspectors.
● Reviewed radiographs and directed project documentation efforts.
● Conduct weekly meeting with QA/QC Engineers / Inspectors to address quality issues, non-conformances and determine the root cause analysis and recommends corrective & preventive actions needed. 03/1993 – 02/1995 Project Engineer Makati Philippines Philippine Hitachi Plant Co. Ltd.
● Prepared material and cost estimates, designs, and schedules.
● Conducted site inspections for the ROHM Electronics project.
● Liaised with client representatives regarding project progress and schedules, and performed joint inspections and acceptance.
● Authored QA/QC procedures and project documentation.
● Implemented safety measures during construction and erection phases.
● Ensured adherence to project specifications.
● Performed pre-commissioning and commissioning tasks. 04/1989 – 10/1992 QC Engineer to Project Inspector Jubail Industrial City, KSA BELLELI Saudi Heavy Industries Ltd
● For the Qatar General Petroleum Company North Field Development Project
(onshore), oversaw piping fabrication inspection, pipe heat treatment, NDT progress records, spool release, and documentation.
● For the Qatar General Petroleum Company North Field Development Project
(Offshore), Executed offshore dimensional and material inspections, and prepared as-built drawings and documentation.
● For the Aramco Yanbu Crude Export Capacity Project, compiled the final dossier and subsequently coordinated fabrication and erection groups as Quality Control Project Inspector.
● Developed QA/QC procedures, issued non-conformity reports, recorded weekly fabrication status and inspections, and liaised with Client inspectors for joint inspection and acceptance.
● Released prefabricated materials for shipment and documented daily fabrication activities and inspections.
● For desalination, gas company, and steel company projects, prepared Inspection and Test Plans, conducted fabrication inspections, released finished items to job sites, liaised with Client inspectors, and prepared QA/QC procedures and documentation.
11/1987 – 10/1988 Cadet Engineer Bauan Batangas, Philippines Atlantic Gulf and Pacific (AG&P) Metals Fabrication Group EDUCATION
06/1982 – 10/1987 DMMSU -CET La Union, Philippines Bachelor of Science in Mechanical Engineering (BSME, Mechanical Engineering SKILLS Quality Management Piping System Installation Mechanical Equipment (Rotating & Static) Inspection and Testing, planning
& coordination
Waste Water / Water Treatment Mentoring
Construction & Commissioning Quality Consultant
Project Delivery Risk and Compliance
Project Management Construction Methodology
International Standards (ASME/ANSI, ASTM, API, AWS, ISO, etc.) Welding (WPS/PQR, WPQ) Tendering
Estimating OHS Management
Documentation Maintenance work
CERTIFICATES
Registered Mechanical Engineer (Philippines), License No.: 0038077 12/1988 Professional Regulation Commission, Philippines
Energy Consumer & Stakeholders Conference – Renewable Energy Programs 07/2017 Department of Energy (DOE), Philippines
Information, Education and Communication Campaign on the Philippine 11/2016 Energy Plan (PEP) 2016–2013
Department of Energy (DOE), Philippines
Certificate of Attendance – 64th Philippine Society of Mechanical 10/2016 Engineers National Convention
Philippine Society of Mechanical Engineers (PSME)
Seminars Attended:
- Education, Commercial and Industrial “Medical Gas system”
- Plenary Session “Construction Management”
- Plenary Session “Alternative Dispute Resolution/Arbitration”
- Plenary Session “Business Strategies for Global Market”
- Environmental, Health and Safety “Understanding Revised Fire Code of the Philippines”
- Environmental, Health and Safety “Monitoring and Visualization of Particle Distribution in a Microchannel using the New Technique Computer Process Tomography”
- Heating, Ventilation, Air Conditioning and Refrigeration “Oil Fouling”
- Heating, Ventilation, Air Conditioning and Refrigeration “New Ejector Design for HVACR”
- Environmental, Health and Safety “Safety or Relevance of Occupational Safety and health (OSH) in Mechanical Engineering
- Education, Commercial and Industrial “Piping, Assessment & Economic Replacement”
- Environmental, Health and Safety “Energy Management System ISO/50001”
- Education, Commercial and Industrial “Designing Stand – by Generator Systems”
- Environmental, Health and Safety “Fire Flow and Hydrant Requirements”
- Certificate of Appearance – 64th PSME National Convention with the theme “Challenges and Opportunities to Globalization and Cross Bordering” 2014–2015 Transmission Development Plan (TDP) 05/2016 National Grid Corporation of the Philippines (NGCP) Certificate of Appreciation Award for Safety, Quality and Productivity 03/2013 ExxonMobil – Singapore Parallel Train Project, Singapore Safety Instruction Course (Manhole) for Supervisors 02/2010 Absolute Kinetics Consultancy Pte Ltd, Singapore
Safety Orientation Course (Manhole) Workers 08/2009 International Training Solutions Pte Ltd, Singapore Internal Quality Audit Training Course (ISO 9001:2000) 05/2006 CCIS Singapore Pte Ltd
ASME Code Awareness Program 02/1996
ABS Industrial Services Verification Inc.
Productivity thru Workplace Management (GEMBA KAIZEN & 5’S) 02/1996 Philippine Federation of AOTS–ABK Alumni Societies and JMA Management Centre Inc.
Welding and Testing, Boiler and Pressure Vessel Code, and Steel Structure 11/1995 Automation Seminar
Philippine Welding Society (PWS)
H2S (Hydrogen Sulphide) Training in Offshore 04/1990 Maritime Industrial Services, Sunbelt Division, QGPC Offshore Qatar The above information is prepared by:
Ernesto L. Fabros
Date: 02 November 2026
- - - - - - - E N D - - - - - -