Richard Norman Stein
**** ***** ******, ********* #*
Ogden, Utah 84401
Phone: 385-***-****
Email: ***********@*****.***
EDUCATION:
WILSON BORO HIGHSCHOOL:
22nd and Washington Boulevard in Wilson Borough, Easton, Pennsylvania-18042
EDUCATION FROM 1965 TO 1968
Neomi Smith, Special Ed. Teacher
JUNIOR ACHIEVEMENT:
Worked at the A&P Supermarket for the summer of 1966 A & P SUPERMARKET: (The Great Atlantic & Pacific Tea Company.) 801 South 25th Street, Easton, Pennsylvania-18045
Unloading and Sorting: Breaking down the shipment of products (which, in a Junior Achievement Program, Student I prepared items to be brought to the sales floor.
Stocking and Rotating: Placing products on the shelves, ensuring that the oldest items were brought to the front (a process called "First-In, First-Out" or FIFO) to minimize spoilage or expired goods.
Making sure all products were pulled to the front edge of the shelf and turned to face the customer. This made the store look full, neat, and appealing.
I used a pricing gun and stamp to ensure every individual product had a legible price. 2
I would keep the store clean, sweeping up any spills or broken items, and ensuring the aisles were clear for shoppers.
As a Bagger I Carefully placed groceries into paper bags, separating heavy items
(cans, jugs) from light items (bread, chips), keeping chemicals (cleaners) separate from food, and protecting fragile items like eggs and produce.
Offering and assisting customers by taking their bagged groceries out to their cars.
Collecting shopping carts from the parking lot and returning them to the store. EMPLOYMENT FROM 1968-2025:
#1-BURGER KING RESTURANTS
1958 S 4th Street, Allentown, Pennsylvania-18103.
Duties:
Taking orders from customers.
Handling cash transactions and making change.
Operating the chain broiler for the Whopper patties.
Preparing other menu items like fries, milkshakes, and soft drinks.
Keeping the dining room and counter areas clean, including wiping down tables and sweeping floors.
Emptying trash cans.
Keeping the restrooms clean and stocked.
Making sure the front counter was stocked with napkins, straws, cups, and condiments.
Restocking ingredients on the preparation line (buns, lettuce, tomatoes, etc.). 3
#2-D & D Shirt Company
1801 Newport Avenue, Northampton, Pennsylvania-18067 Duties:
I Loaded a heavy roll of fabric onto a rod at one end of the cutting table.
Unreeling the cloth, layer by layer, along the entire length of the cutting table. This required extreme care to ensure the following quality requirements were met:
Making sure the fabric was laid flat without being stretched or wrinkled, which could cause cut pieces to be misshapen.
Aligning the edges (selvedges) of each ply precisely over the previous one.
Fastening the layers of cloth to the table using weights, clamps, or staples to hold the material in position, especially important before the marking and cutting process.
Cutting the fabric at the end of each layer (ply) and sometimes making strategic splices
(overlaps) to remove flaws or when a roll ran out.
#3-Lehigh Dying and Finishing company
801 North Meadow Street, Allentown, Pennsylvania-18102 Duties:
I meticulously weighed and measured the dry dye powders, various chemicals, salts, and agents (like acids or alkalis) according to a specific, detailed "color formula" (or recipe) for the required shade and fabric type.
4
I would load the material (fabric, yarn, or garments) into the large dye tub or machine.I manually lifted, and ensured the material was properly arranged to prevent tangling or uneven dyeing.
I was responsible for starting and controlling the entire dyeing process:
I would turn valves to fill the tub with the correct amount of water, steam, and then carefully add the precise amounts of dye and chemicals into the tub.
I would set the thermostat, timing devices, and control panels to maintain the specified water temperature, dye flow rate, and processing time for the fabric.
I would check gauges, thermometers, and observe the color of the textile in the bath.
I would periodically withdraw small samples of the dye solution to test the concentration, by simple chemical tests).
At the end of the cycle, I would visually examine and feel the finished goods to ensure the color was uniform, the shade matched the sample, and there were no defects (like streaks or spots).
Once approved, I would drain the solution, remove the dyed material (often to a hand truck), and label the lot for the next processing stage.
I would also perform routine cleaning and minor maintenance on the dye tub equipment.
#4-D & C SPINOSA CONTRACTORS
Jerome Street Allentown, Pennsylvania-18109
Duties:
My responsibility was to coat the pipe welds.
I would melt tar to apply to the pipe welds, to prevent the pipes from leaking, and then 5
inspect the pipe for leaks, then close the ditch.
#5-UNITED STATES MARINES CORPS
(Military Service United States Marine Corps (09/29/1973-01/12/1976) 521 Blvd de France, Bldg 283 Parris Island, South Carolina- 29905 401 West Rd. Camp Lejeune, North Carolina- 28547-2519 Duties:
Served with Company E, 2nd Bal, 8th Mar., 2nd Mar Div. FMF
0311 Rifleman, 0331 Machine Gunner
Expert with M-16 Rifle, 45 cal pistol, 50 and 60 cal Machine Guns
National Defense Service Medal.
Good Conduct Medal
Ranked PFC (E-2)
Discharged with a GOS (General Discharged 1976)
#6-John A. Johnson and Sons:
Orefield, North Whitehall Twp, Lehigh County, Pennsylvania-18069 6
Duties:
Sorting and Grading: Working on the conveyor belt to visually inspect potatoes, removing any that were damaged, bruised, diseased, or misshapen, ensuring only quality product went out.
Packing/Bagging: Operating machinery or manually filling burlap sacks or paper bags with graded potatoes (e.g., 5, 10, or 50 lb bags).
Stacking and Palletizing: Using a forklift/loader, stacking the full bags onto pallets for storage or shipment. This required heavy lifting and careful organization.
Storage Management: Monitoring the storage conditions (temperature, ventilation) of the potato bins to prevent spoilage.
Loading/Unloading Trucks: Assisting in loading the final product onto trucks for delivery to markets or processors.
General Maintenance: Cleaning the warehouse, conveyors, and grading equipment to maintain sanitation standards.
Operating the Bucket Loader: Skillfully maneuvering the loader (likely a skid steer or small tractor with a front-end loader) to scoop up or assist in collecting rocks.
Transport and Disposal: Hauling the gathered rocks to designated "rock piles" on the edge of the fields or transporting them for use in road bases, culverts, or erosion control on the farm property.
Equipment Protection: The ultimate goal of this duty was preventing expensive damage 7
to planting, cultivating, and harvesting machinery (like the potato planter and harvester).
#7-LEHIGH VALLEY MANPOWER TEMPORARY EMPLOYMENT,PLACED @ THE ALLENTOWN STATE HOSPITAL
1600 Hanover Avenue, Allentown, Pennsylvania-18109. Duties:
Essentially, my job was to handle everything that allowed the skilled masons to focus solely on laying brick, stone, or block. It was a vital, non-stop support role that taught me a lot about the materials and techniques used in historic building maintenance!
My Core Duties of a Mason Helper:
I would be responsible for moving heavy materials—bricks, blocks, stone, bags of cement, sand, and mortar mix—from storage areas to the work site.
Mixing and Preparing Mortar/Concrete: I would operate and clean mortar mixers, and constantly mix fresh batches of mortar or grout according to the mason's instructions. Consistency was key here.
Scaffolding and Work Area Setup: Assisting in the safe erection and dismantling of scaffolding, ladders, and temporary barriers.
Cleaning and Tending: Keeping the work area tidy by constantly sweeping up debris, chipping off old mortar, and removing excess material to keep the skilled mason productive.
Tool Management: Cleaning, maintaining, and organizing the masons' tools (trowels, levels, hammers, chisels, floats, etc.) so they were ready for immediate use.
Supply Runs: Making sure the masons never ran out of the materials they needed, often 8
running to storage or different parts of the complex for supplies.
Cleanup: After a job was finished, thoroughly cleaning the site, including washing down walls and disposing of construction waste.
#8-Lee Mochner Roofing Contractors:
South. 4th Street, Allentown, Pennsylvania-18103.
Duties:
Loading and Hauling Materials:I was responsible for unloading shingles, rolls of felt, buckets of cement, lumber, and other materials from the trucks and moving them to where they were needed.
Hoisting: For multi-story homes or commercial buildings, I was responsible for setting up and operating ropes, pulleys, or hoists to carry heavy materials, like kettles of hot tar, up to the roof.
I was the crew member responsible for getting the job site ready.
Demolition: Removing old roofing materials (shingles, felt, flashing) down to the roof deck, often using roofing shovels and pry bars.
Cleanup: Collecting and disposing of all the old debris, nails, and scraps from the roof and around the house (the ground, gutters, etc.).
Cleaning the Deck: Sweeping and clearing the roof deck to prepare a clean surface for the new installation.
Setting Up the Site:
■ Safety: Setting up extension ladders, scaffolding, and safety lines.
■ Ground Support: Ensuring dumpsters or disposal areas were properly placed and 9
managed.
Specific to Hot-Tar Roofing, In 1976, hot-tar (or built-up roofing) was common, especially for commercial and flat roofs. If Lee Mochner did this type of work, your duties likely included:
Kettleman Duties: Chopping solid tar (asphalt) into smaller pieces and tending the hot-tar kettle to ensure the bitumen was heated to the correct temperature for the roofers. This required careful temperature monitoring.
Hauling Hot Materials: Carrying or hoisting the buckets of hot tar up to the roof for application.
Spreading Gravel: Applying the final layer of gravel or aggregate over the hot-mopped asphalt to create a protective, reflective surface.
Assisting the Skilled Roofer, my duty was simply being the skilled roofer's extra set of hands and learning the trade.
Supplying Tools: Keeping the skilled roofers supplied with the right tools, fasteners (like roofing nails), and materials before they needed them.
Basic Installation: Under direct supervision, I assisted with unrolling roofing felt, helping align shingles, or fastening materials that required less precision.
#9-FAIRTEX MILLS
2645 Mitchell Ave., Allentown, Pennsylvania-18103. 10
Duties:
As a yarn dye machine operator in a textile mill, my duties involved a mix of machine operation, chemical handling, quality control, and maintenance. Key responsibilities included:
Machine Setup and Operation:
Studying guides, charts, and specification sheets to determine machine setup requirements for each specific order.
Loading yarn into the dyeing machine (often wound on bobbins or cones, a process called package dyeing).
Threading the yarn through various guides and tension bars in the machine.
Starting and controlling the equipment to wash, bleach, and dye the yarn.
Adjusting controls for temperature, pressure, tension, and speed to ensure the process runs correctly and efficiently.Dye Preparation and Chemical Handling: Weighing and mixing dyes, water, detergents, and other chemicals according to specific formulas or "recipes" to create the correct color solutions. Adding these solutions to the machine tanks to achieve the desired dye concentration. 11
Monitoring and Quality Control:
Observing control panels, displays, and the yarn itself during the process to ensure everything is operating correctly and the product meets quality standards.
Examining and feeling the yarn to identify defects, variations in color, or other flaws.
Testing solutions to detect variations from standards. Troubleshooting and Maintenance:
Identifying issues or malfunctions during the dyeing process (like yarn breaks) and taking corrective action.
Performing routine maintenance, such as cleaning and oiling equipment, to ensure optimal operation.
Notifying supervisors or mechanics of major equipment malfunctions or necessary repairs.
Documentation and Safety:
Recording operational and production data, including temperature readings, process parameters, and any adjustments made.
Adhering to safety protocols, including wearing protective equipment (like gloves or goggles), when handling chemicals and operating machinery in a noisy and potentially hazardous environment.
12
Collaborating and communicating with other team members, supervisors, and quality control personnel.
#10-NATIONAL ADVERTISING MANUFACTURING COMPANY PRINTERS 1324 Sherman St, Allentown, Pennsylvania-18109.
Duties:
As an electrician's helper, my duties were primarily to provide support to licensed electricians by performing less skilled, physically demanding tasks and assisting in various stages of electrical installation, maintenance, and repair My responsibilities included:
As an electrician's helper, my duties were primarily to provide support to licensed electricians by performing less skilled, physically demanding tasks and assisting in various stages of electrical installation, maintenance, and repair. Material and Tool Management:
Transporting tools, materials, and equipment to and from the work site.
Organizing and maintaining a tidy work area and ensuring tools and supplies were in order.
Requisitioning new materials or supplies as needed.
Cleaning the work area and equipment at the end of the day or job. 13
Preparatory and General Labor Tasks:
Digging trenches or holes for the installation of conduit or ground rods.
Drilling holes in construction materials to pull wiring through openings.
Breaking up concrete with an air hammer to facilitate installation or repair.
Erecting scaffolding, hoists, or temporary barricades.
Moving and positioning heavy electrical equipment.
Direct Electrical Assistance (Under Supervision)
Measuring, cutting, and bending wire and conduit using hand tools and measuring instruments.
Stripping insulation from wire ends and attaching wires to terminals for soldering.
Threading conduit ends and connecting couplings and fittings.
Pulling or pushing wiring/cables through conduit and openings.
Assisting with the installation of fixtures, outlets, circuit breakers, and other electrical components.
Examining electrical units for loose connections and tightening them.
Learning to read and interpret blueprints, schematics, and the National Electrical Code
(NEC).
Assisting with troubleshooting by using a test meter to trace short circuits (as skills developed).
#11-PORTLAND SHOE COMPANY
14
79-81 Portland Avenue in East Rochester, New Hampshire- 03868 Duties:
As a general laborer at a shoe manufacturing company like Al-Gor (Portland Shoe Company) in 1989, my official job title was that of a general laborer, a more specific entry-level title like Factory Worker, Production Worker.
My duties involved performing various manual tasks essential to keeping the production line running smoothly.
Typical Duties and Responsibilities:
Duties were varied and often depended on the specific needs of the factory floor each day. The tasks generally required physical stamina and the ability to follow instructions carefully.
Material Handling: Loading, unloading, and transporting raw materials (like leather or rubber) and finished products between different work areas, machines, or storage.
Assembly Assistance: Assisting skilled workers or machine operators by holding materials, feeding materials into machinery, or preparing components for further processing (e.g., attaching insoles to lasts, preparing heels).
Cleaning and Maintenance: Keeping your work area and the general factory floor clean, free of debris, and hazard-free. This included sweeping floors, cleaning workbenches, and possibly cleaning and lubricating equipment.
Packaging and Shipping: Boxing finished shoes, labeling them, organizing inventory, and assisting with loading shipments.
Quality Control: Monitoring the production line for defective products or equipment malfunctions and reporting issues to supervisors.
Basic Machine Operation: Operating simple hand tools or basic machinery after receiving on-the-job training, potentially including a sanding machine or pressure washer. 15
Following Safety Procedures: Adhering to all health and safety regulations, including wearing required personal protective equipment (PPE) such as safety glasses or ear protection.
#12-MARLBORO MASS. NURSING CARE CENTER, AS A JANITOR 121 Northboro Road East, Marlborough, Massachusetts-01752. Duties:
My specific, individualized job description from the Marlboro Mass. Nursing Care Center in 1989 is not available, janitorial duties in nursing care centers typically involve a range of cleaning, sanitation, and minor maintenance tasks, often following strict health and safety guidelines.
The general duties would have been similar to the following: General Cleaning and Sanitizing.
Floor Care: Sweeping, mopping, polishing, and vacuuming floors in resident rooms, common areas, hallways, and dining facilities.
Surface Cleaning: Dusting and wiping down surfaces, furniture, fixtures, windows, and mirrors.
Restroom Maintenance: Thoroughly cleaning and disinfecting all restrooms, including toilets, sinks, and showers.
Waste Management: Gathering and emptying trash and recycling bins, and disposing of waste safely, which often included handling biohazardous materials with appropriate protocols.
Supply Management and Stocking
16
Stocking Supplies: Ensuring restrooms and other common areas were consistently stocked with essential items like toilet paper, soap, paper towels, and hand sanitizer.
Inventory Management: Keeping the janitorial supply room organized and maintaining an inventory of cleaning supplies and chemicals, reporting to a supervisor when new stock was needed.
Maintenance and Safety
Minor Repairs: Performing minor maintenance tasks such as changing light bulbs, unclogging toilets, or tightening a loose door handle.
Safety Inspections: Examining the premises for any safety hazards (e.g., spills, broken equipment) and reporting major repair needs to the maintenance department or supervisor.
Safety Procedures: Following specific safety rules and precautions, including the proper use of cleaning chemicals and equipment to prevent accidents or the spread of infection.
Other Duties
Laundry Assistance: As a janitor I have assisted with laundry duties, such as washing or folding linens.
Assisting Other Staff: Interacting professionally with residents and nursing staff, and responding promptly to spills or urgent cleaning assignments as needed.
#13-RICK'S HANDIMAN COMPANY:
The Morning Call Newspaper-101 N. 6th Street, Allentown, Pennsylvania 18101 17
Duties:
1989 Advertisements in the Newspaper, which was The Morning Call.
All jobs are not too small or too big.
#14-PERKINS WEST RESTAURANT IN NEBRASKA
290 W. Appleway Avenue in Coeur d'Alene, Idaho-83814. Duties:
In 1990, my duties as a dishwasher typically extended beyond just washing dishes and included a variety of essential support tasks to keep the restaurant kitchen running smoothly. The core responsibilities generally included:
Core Dishwashing Duties
General Kitchen Support:
Waste Management: Regularly emptying and cleaning trash and recycling receptacles, and taking the garbage out to the dumpster
Cleaning and Sanitation: Maintaining a clean and organized dish pit and kitchen area, which involved sweeping, scrubbing, and mopping floors, and wiping down various surfaces and equipment.
Stocking Supplies: Monitoring and restocking cleaning supplies (detergents, sanitizers) and ensuring serving stations had adequate levels of clean dishes and utensils.
Equipment Maintenance: Cleaning and maintaining kitchen appliances such as coffee makers, mixers, and the dish machine itself, and reporting any mechanical issues.
Receiving and Organizing: Occasionally assisting with unloading and organizing food and supply deliveries.
18
Basic Food Prep: In some restaurants, assisting with simple food preparation tasks during downtime, such as cutting vegetables, as directed by kitchen management.
#15-UTAH STATE PRISON UCI EMPLOYMENT
1480 N 8000 W, Salt Lake City, Utah 84116.
Duties:
The milling department is a core component of UCI's furniture manufacturing operation, which uses modern techniques and equipment to produce a variety of products, primarily for state and local government agencies. Inmates in the furniture shops learn marketable skills and positive work ethics to help them succeed upon release. Overview of the Milling Department
Purpose: The milling department is responsible for the initial processing of raw wood and other materials to create specific parts and components for furniture assembly.
Equipment: Inmate workers operate modern, state-of-the-art equipment, which has included Computer Numerical Control (CNC) machines to produce precise workpieces using advanced machining techniques.
Products: The department contributes to a wide range of products, including:
■ Desks, bookcases, and credenzas.
■ Office systems and seating.
■ Custom and modular pieces.
■ Specific large-scale projects, such as the historically accurate furniture for the restored Utah State Capitol building.
19
■ Newer product lines like sit-and-stand desks.
Materials: Work has involved using fine quality woods, high-density plastic laminate, or melamine.
Skills Acquired
Working in the milling department helps participants learn essential job skills like precision measurement, equipment operation, quality control, patience, and teamwork. These are highly transferable skills that individuals can use to obtain employment in the private sector upon release, often leading to a job or career in the construction or manufacturing industries.
Milling Dept of the Furniture Shop
Dorm Janitor
Section Painter
16-EASTERSEALS SENIOR PROGRAM OF NORTHERN UTAH
480 27th St, Ogden, Utah 84401.
Duties:
As a participant in the Easterseals Senior Program of Northern Utah, which is part of the national Senior Community Service Employment Program (SCSEP), My primary duties were to engage in job training and community service activities to help you find permanent, unsubsidized employment.
● Key Duties as a Participant
20
My duties and responsibilities fell into two main categories: job training/community service and active job searching.
1. On-the-Job Training/Community Service
● Work an average of 29 @ $7.25 hours per week at a non-profit or government "host agency" (e.g., schools, hospitals, day-care centers, senior centers).
● Perform assigned tasks for the host agency to gain current, real-world work experience, develop new skills, and build your resume and confidence.
● Be punctual and maintain regular attendance at your assigned training site.
● Accurately complete and submit timesheets on time to your supervisor for approval to ensure you were paid the training wage (highest of federal, state, or local minimum wage).
2. Employment Preparation and Job Search
● Work with Easterseals staff (a "career coach" or "job developer") to identify employment barriers and develop a personalized Individual Employment Plan (IEP) with specific, achievable goals.
● Actively seek and secure permanent (unsubsidized) employment, as this is the primary goal and a condition of participation in the program.
● Participate in additional training opportunities as needed, which could include:
Resume writing workshops
Interviewing skills practice
Computer skills classes
English proficiency classes
Job Clubs to exchange job leads and discuss challenges 21
● Immediately notify program staff when you found a permanent job, so they could complete the necessary paperwork to transition you out of the program.
● Provide required documentation for initial enrollment and annual re-certification to prove age, income, residency, and employment authorization.
● Attend mandatory meetings and training sessions as directed by SCSEP staff. The program is designed to use the community service assignment as a bridge to a private sector job, so active participation in both the work assignment and the job search process was key.
17-MILITARY EXPERIENCE:UNITED STATES MARINES FROM 1973 THRU 1976 Marine Corps Recruit Depot Parris Island, South Carolina -29905 Marine Corps Base Camp Lejeune, North Carolina-59 Molly Pitcher Rd. Camp Lejeune, NC 28547
Duties:
As a U.S. Marine Corps 0311 Rifleman and 0331 Machine Gunner during 1973-1976, My core duties revolved around ground combat operations, functioning as the "tip of the spear" of the infantry. 0311 Rifleman Duties
The primary mission of an 0311 Rifleman is to locate, close with, and destroy the enemy by fire and maneuver, or repel the enemy's assault. Key duties included:
● Infantry Tactics: Executing offensive and defensive operations, including patrols, combat maneuvers, and tactical engagements.
● Weapon Proficiency: Operating and maintaining weapons such as the M16 service rifle, M72 LAW rockets, and hand grenades.
22
● Position Warfare: Locating, constructing, and camouflaging infantry positions and equipment.
● Field Skills: Evaluating terrain and recording topographical information, operating field communications equipment, and participating in basic reconnaissance.
● Close Combat: Engaging in fire and close combat situations as part of a fire team and rifle squad.
●
0331 Machine Gunner Duties
As a Machine Gunner, I was a specialist infantryman providing heavy, sustained fire support to the rifle squads and platoons. Key duties included:
● Heavy Weapons Operation: Tactically employing light, medium, and heavy machine guns, which at the time would have included weapons like the M60 (medium), M2 (heavy), and potentially the Mk 19 grenade launcher.
● Direct Fire Support: Providing suppressing and direct fire to support the movement and operations of other infantry units.
● Weapons Maintenance: Performing extensive disassembly, cleaning, reassembly, and maintenance of all assigned machine guns, often under pressure in field conditions.
● Ammunition Management: Managing the logistical challenge of keeping the weapons supplied with ammunition, a crucial aspect of providing sustained fire.
● Crew Coordination: Working within a machine gun team (typically a gunner, assistant gunner, and ammo carriers) to effectively deploy the weapon from various positions, including mounted on vehicles or dismounted with a tripod.
● Fire Planning: Learning and implementing fire commands, understanding fields of fire, and coordinating with support elements like mortars or artillery.
X_Richard Norman Stein
Richard Norman Stein 11/26/2025