Plasma Coating & Medical Instrumentation Technician

< Using a plasma with prepriotory precursors to coat medical instruments for medical industry, and

military parts with ITAR certification.

contractor for Execu-search

II-VI-Easton, PA

August 2019 to March 2020

Id, and entering data in Mesa, for SPC and data collection of process. contractor

Draeger Medical INC-Telford, PA

June 2018 to May 2019

for Johnson Service Group)

Working for the demo logistics group, getting ready new and existing medical equipment for hospitals, training, and demo groups. Repairing and installing software updates and yearly PM on medical equipment. Ventilators, Evita infinity V500 and VN500, Incubators Baby Leo TN500. Oxy log 300, Carina. Engineering Technician

Balantine Laboratories Annadale, NJ-Clinton, NJ

November 2016 to June 2018

Build and repaired Transconductance amplifiers among other equipment for military and private use Contract work Volt

Infinera-Allentown, PA

December 2015 to May 2016

Assembly and testing, troubleshooting of photonic integrated circuits modules for communication industry.

Utilizing Pic and place bonders, wire bonding using Palomar 8000i ball bonder. Controls systems specialist, contract worker

Contract work Aerotek

March 2015 to September 2015

Updating equipment and software, PLC, HMI, RS Logix 5000. NFPA 70E, OSHA training.

Working as a process technician, doing wire bonding using Palomar 8000i ball bonder. Dage testing, Chip Electronics /Engineering Technician

Allentown, PA 18102

**************@*****.***

+1-610-***-****

Authorized to work in the US for any employer

Tilghman St-Allentown, PA

December 2024 to November 2025

Edwin Cuevas

Work Experience

Plasma Coater Technician

Machine operator, inspection semiconductor circuits for communication, microscopes, SPC

Avago Technologies

December 2014 to February 2015

9999 Hamilton Blvd, Brownsville, PA December 2014 - February 2015

(Contract work Express pros)

Machine operator, inspection semiconductor circuits for communication, microscopes, SPC Micros 2294 North Penn Road Hatfield, PA August 2014 - October 2014 Fabrication semiconductors, inspection validation

Field Service Technician

Indel Ave-Willingboro, NJ

October 2012 to January 2014

Validation of equipment for induction furnace. Equipment associated with controls of operation includes power supplies, control consoles, remote and PLC I/O cabinets, vacuum systems, servo drives, and HMI. Primarily used RSLogix 5000 to calibrate and maintained plant instrumentation and control loops. Upgraded new and existing equipment with knowledge of Auto Cad, HMI's, PC's, and motion controls. Using RS485 or RS286 as backbone for distributed system, using Ladder logic, P&ID, and electrical schematics. Some basic programming of RSLogix 5000. Quality Sr. Electronics Technician

Air Products Inc-Allentown, PA

June 2005 to April 2011

• Responsible for validation of complex systems designed and built around the principles of plasma, physics, robotics, high vacuum technology, pneumatics, and electronics.

• Flashed Chem guards, BCD (bulk chemical delivery system), Gas guards (gas delivery systems) controllers containing PLC, AC/DC circuit boards with programs which controlled HMI (human machine interface) rejected and replaced parts not working using SAP (trained in SAP Material management). Pressurized systems under vacuum and did helium leak checks, outboard and inboard on both gas, and chemical delivery system equipment.

Provide feedback for mechanical hardware, software, and system failures attended weekly meetings on several existing product lines and future ones updated and wrote new SOP (standard operating procedures).

Provide technical support to field service engineers across USA, and Asia, on operational and maintenance aspects all equipment.

• Experienced with various chemical and gases, Argon, Helium, Nitrogen, and RGA analyzer, AMAT, Varian vacuum pumps.

• Calibrated betatron and thermal couple vacuum gauges, pressure transducers, pneumatics, air valves, heat tapes, PLC, Zorber controllers, and high voltages. Electronic Technician

JDS Uniphase-Ewing, NJ

December 2004 to June 2005

Maintained, programmed and calibrate fusion-splicing machine for the manufacturing of high power fiber optic amplifiers used in communication networks.

Intern

Lehigh Valley Hospital-Allentown, PA

September 2004 to November 2004

Assisted the Information System Department in various ways, such deployment of new computers, updating licensing for upgraded software, worked with wireless infrastructure, inventory, and served as on call person.

Sr. Electronics Technician

Lucent Technologies

July 1998 to March 2003

Experienced with narrow and wide band transmitter from development to testing and production.

• Used Auto bonder robot that utilized a cognex vision system with a pick and place gantry that assembled parts that make the transmitter are an optical sub assembly, a spherical lens, and a photo diode. These parts then get wire bonded with a Kulicke and Soffa wedge bonder which are placed on temperature emitter controller, which in turn get bond onto a hybrid integrated circuit. These parts are in turn packaged into a package with a coplanar wave-guide, an application specific carrier a pin array that is critical when bonding to RF pads in the transmitter packages.

• all these parts are auto bonded, wire bonded, baked seam sealed, and leak checked, they are tested for Time

Resolved Spectroscopy, Bit Error Rate Test, and statistical process control. As a G grade Photonics engineering technician, my responsibilities were to operate and complete process checks on a daily basis as per ISO standards 9000. Maintenance and train others on test sets, BERT (Bit Error Rate Test), TRS

(Time Resolved

Spectroscopy), for gathering test data for statistical process control. In the research and development also worked with engineers in developing new models for next generation products using Mass Spectrometer to implement onto the production floor. Electronics/Vacuum Technician

Diamonex-Fogelsville, PA

July 1996 to June 1998

At Diamonex my responsibilities were to build and integrate automated test machines (ATM) to vacuum chambers, setup the ion source to all electrical connections.

• Do statistical process control on a daily basis and train others to troubleshoot and maintenance on all automated test machines. Plasma was created in a vacuum chamber and a diamond substrate was deposited on a molecular level to a polycarbonate lens for scratched resistance features.

Assisted a team to integrate plasma enhanced chemical vapor deposition (PECVD). The system consisted of a hallow cathode electron source or ion source into a closed drift ion source to create a plasma for deposition in a vacuum chamber, pumping and roughing diffusion pumps.

• Maintaining and reading of ion gauges, baratron pressure, mass flow controllers, polycold source, gases, leak back checks, RGA analyzer, Gas Chromatography, Mass Spectrometer, Ladder logic, programming and wiring programmable logic controllers (PLC) Siemens, Modicon, Allen Bradley. Computer Technician

Edwards Business Machines-Bethlehem, PA

October 1994 to April 1995

• Installed troubleshoot computers; copiers, fax machines.

Field Service.

Education

Computer Networking Infrastructure (A.S. in Computer Networking Infrastructure)

Lehigh Carbon Community College-Schnecksville, PA

January 2003 to Present

Electronic Engineering Technology (A.A.S.)

Lincoln Technical Institute-Allentown, PA

August 1994 to November 1996

Trade school

Skills

• Systems engineering

• Maintenance

• Microsoft Outlook

• Record keeping

• Robot programming

• Programmable Logic Controllers

• Animal welfare

• Cash handling

• Electrical maintenance

• Purchase orders

• Guest services

• TCP/IP

• Safety standards in production

• Wiring and circuitry work

• Viscosity measurements

• Microsoft Powerpoint

• Telecommunication

• Civil engineering technician assistant experience

• Fire safety protocols implementation

• Data management

• Retail sales transactions

• Spectroscopy

• Operating systems

• Low voltage

• Customer communication

• High-Performance Liquid Chromatography

• Productivity software

• Equipment troubleshooting

• Customer service

• Word Processing

• Through-hole technology (THT)

• Network troubleshooting

• Loss prevention

• Equipment maintenance

• Circuit boards

• Mechanical assembly

• LabView

• LAN

• High availability

• Power distribution systems

• Semiconductor experience

• Equipment installation

• Attention to detail

• Electromechanical machinery assembly

• Technical writing

• Network Infrastructure

• Process control instrumentation

• Assembly drawings

• Engineering functional testing

• Project management

• CMMS

• SolidWorks

• Cleanroom

• GPS

• Electrical Experience

• Precision measurement in machining

• Supply chain management

• Lead civil engineering technician experience

• Electrical motors

• Laboratory Experience

• Lift truck

• Time management

• Industrial equipment

• Industrial automation

• Technical skills instruction

• Hardware support

• Incident Reporting

• Thermal analysis

• Ethernet

• CAD visualization

• Pneumatic systems

• Scientific research

• Quality control

• Load & unload

• Thermal testing

• Surface Mount Technology

• Training & development

• Electrical motor installation

• Blueprint reading

• Computer operation

• Assembly

• Decision making

• Industrial controls

• Electrical diagnostics

• Electrical systems installation

• Data analysis skills

• Team motivation (leadership skill)

• PLC programming

• Linux

• Basic math

• AutoCAD

• Leadership

• Hydraulics

• Technical Proficiency

• Processing cash transactions

• English

• Field service

• Project implementation

• Biomedical engineering experience within healthcare

• Maintenance technician experience

• Personal protective equipment (PPE) implementation

• Regulatory compliance

• Mechanic experience

• Safe work practices

• Interpreting technical drawings

• Microscopy

• Multimeters

• Organizational skills

• Computer hardware

• Electrical troubleshooting

• Microsoft Excel

• Electronic equipment testing

• Office experience

• Supervising experience

• Mechanical maintenance engineer experience

• IT

• Industrial equipment troubleshooting

• Hand tools

• Wire harness assembly

• Low-voltage electrical systems

• Electrical assembly

• Torque drivers

• Soldering irons

• Schematics

• SAP Materials Management

• Customer complaint resolution

• GMP

• Controlling experience

• Electrical equipment repair

• Math

• Quality assurance

• Conflict management

• CGMP

• PCB

• Data science

• Welding

• Root cause analysis

• Hazardous materials management

• Microsoft Word

• Managing engineering teams - Largest engineering team managed (6-10 team members)

• Measurement (quality control)

• IT support

• Tape measure proficiency

• Electronics testing

• Gas Chromatography

• CAD

• ISO standards

• Microsoft Office

• Manufacturing

• Laboratory information management systems

• Computer networking

• Power tools

• Ladder logic (LD)

• Wet chemistry

• Calibration

• Continuous improvement

• Product development

• Fiber splicing

• Blueprint specification interpretation

• Electrical systems

• Ohmmeter

• ISO 9001

• VPN

• CAD plan production

• Supervisory control and data acquisition (SCADA)

• SharePoint

• Engineering troubleshooting

• Spanish

• Communication skills

• Microscope proficiency

• TCP

• Technical support

• Internet of things

• User Interface (UI)

• Mechanical troubleshooting

• Medical equipment operation

• CAD documentation

• Data center experience

• Automotive electrical systems

• Oscilloscopes

• Environmental protection

• Control systems

• Electronic circuit boards

• NEC

• Ability to follow instructions

• Laboratory instruments

• Statistics

• Computer literacy

• Teaching

• POS systems

• Technical documentation

• Manufacturing company experience

• Firmware

• Management

• Wire strippers

• Data interpretation

• Equipment testing

• Electro-mechanical components

• Wire crimpers

• Technical drawing

• Micrometer

• Windows

• Manufacturing facility

• Calipers

• Software troubleshooting

• Electrical engineering

• Systems technician experience in electrical engineering

• Electronics assembly

• Research & Development

• Technical troubleshooting support

• Computer science

• Algebra

• Electrical building codes

• Financial transaction processing

• Electrical soldering

• Pick & place devices

• Connector assembly

• Intake

• Electrical system testing

• Customer support

• Civil engineering - Civil engineering experience (More than 20 years)

• Equipment malfunction troubleshooting

• Packaging

• Automated optical inspection

• High-pot testing

• Analysis skills

• Voltmeter

• CAD presentation

• Scissor lift

• SAP

• EHS

• Report writing

• Customer returns handling

• Forklift

• Vision inspection system

• Quality standards in production

• Mechanical knowledge

• Document management

• File organization

• Materials Management

• Microsoft Windows

• Electrical wiring

• Industrial electrician experience

• Robotics

Languages

• Bilingual

• Spanish - Expert

• English - Fluent

Certifications and Licenses

Fundamentals of Engineering

Certified Engineering Technician (CET)

Low Voltage License

OSHA 10

Driver's License

Contact this candidate