Industrial Maintenance & Heat Treat Technician with LOTO Expert

John Wayne Williams

**** *. ***** ****** *** **

Baytown, Tx. 77520

Cell: 562-***-****

***********@*****.***

Objective: To obtain an operations position in the petrochemical/power plant industry by utilizing my extensive plant logistics skills and vast mechanical experience.

Qualifications:

*LOTO Specialist *Class “B” Mechanic *Layout Pipe Fitter *Level II Heat Treat Tec

*Catalyst Technician. *HASC Certified Tx. *Valve Mechanic *OSHA 10 Certified

*ISTC Certified Tx. *Aircraft Interior Mech. *Infantry Squad Leader *TWIC Certificate

*Certified Tank Gauger. *Certified Product Pumper *Certified Process Operator *Safe Work Permit Writer Work History:

03/24-04/25 Axiom Heat Treat Inc. 160420Craaig Ln. Huntington Beach, Ca. 92647 Level II Heat Treat Technician- Set-up/monitor Troubleshoot/demo pre-post weld heat treat for client company welders in various power plant/refinery environments. In charge of up to 4 employees, coordinate with plant operations, & client company general foreman for job specifications. JSA writer, & paperwork.

(Contractor).

09/23-03/24 HF Sinclair 4949 Edith Blvd. NE Albuquerque, NM. 87107 Maintenance Technician- Repair/replace/install steam trace lines, centrifugal pumps, asphalt discharge/suction lines, valve replacement, tank mixers, blind installment, diaphragm pumps, boiler repair, liaison with contractors, LOTO, Safe/Hot Work permit writer, part orderer, etc. 12/22-02/23 Camin Cargo Control 1001 Shaw Ave. Suite 300 Pasadena, Tx. 77506 Inspector- 3rd party plant tank & barge gauger for the various Houston area refineries & chemical plant terminals. Record outages/innages/water cuts/temperature along with samples and report my findings to my company & client plant operations. 07/19-05/22 OSR Inc. 2343 Allen Circle Baytown, Tx. 77523 Level II Technician- JSA writer, liaison with plant operators for hot work permits, coordinated with support Safety/ Scaffold Companies management for fire/whole watch personnel placement, & scaffold mods. Communicated with client company Heat Treat Engineers for heat treat procedures, weld verification & ISO's/P&ID's. In charge of up to 5 employees, rig/truck driver, set-up/monitor/troubleshoot/demo pre-post weld heat for client company welders, coordinated with plant E/I dept. for generator rack-in or house power for 480V heat treat company consoles (Contractor). 06/21-11/21 New Leaf Biofuels 2285 Newton Ave. San Diego, Ca. 92113 Plant Operator- Monitor oil fill/charge tanks, manifold

& pump tank to tank transfers, run centrifuge/flash system to remove H20 from raw oil. Run oil shaker to remove particles from raw oil, truck rack ops. Wastewater operator- CAF/DAF system, tank to tank transfers, sample grabber/perform PH, moisture, & MAI test. Treat wastewater with hydrochloric acid, & polymer to send clean H2O to the city. Yard vacuum truck driver & operator to pump waste water, sludge/H20/oil/B99 Biodiesel.

08/14-03/19 Team Industrial Services Inc. 13131 Dairy Ashford Rd. Sugar Land, Tx. 77478 Level II Heat Treat Technician Monitor/set-up/ troubleshoot/demo pre-post weld heat treat for client company welders. In charge of up to 3 employees. ISO's/P&ID's readers. Wrapped pipes, vessels, & towers in power plants & refineries (Contractor). 07/16-02/18 Stork Technical Services/The Fluor Co. 3350 Rogerdale Rd. Houston, Tx. 77042 Level II Heat Treat Monitor/set- up/troubleshoot/demo pre and post weld heat treat for client company welders. (Contractor) 02/14-07/16 Phoenix Services Inc. 3008 N 23rd. Street Le Porte, Tx. 77571 Level II Technician- Set-up/ troubleshoot/monitor/ demo pre-post weld heat treat for client company welders. Pipe wrapping, vessels, & towers. Coordinate with QC's and Heat Treat Engineers for work orders & procedures/ISO's-P&ID's. In charge of up to 5 employees, DOT rig/truck driver, JSA, & company paperwork writer (Contractor).

08/13-03/14 Aerotek Engineering & Environmental 990 W. 190th St. Suite 400 Los Angeles, Ca. 90502 Stationary Mechanic- (Sanitation District of Los Angeles County/San Jose Creek-Temp) remove/install, repair centrifugal pumps, mixers, blowers, & gearboxes. Also PM on generators, air compressors, & welding machines, rigging loads for boom truck//crane lifts, JSA, LOTO on electrical/mechanical equipment, use pneumatic/electrical tools (Contractor).

09/12-07/13 P2S Plant Performance Services 2721 Summerset Blvd. Paramount, Ca. 90723 Boilermaker – Remove/Install slip blind flanges, gate valves, process lines, heat exchangers, fin-fans, etc. out for refurbish or repair/replacement, Hot bolt, pneumatic tools, acetylene torch bolt/line cutter, load rigger, JSA, ensure LO/TO & safe work (Contractor). 07-09/12 Tesoro Petroleum Inc. 2101 E. Pacific Coast Hwy. Wilmington, Ca. 90744-2914 Pumper II/Operator – RP&S Department. Field operator monitored safe work conditions in the tank farm unit. Wrote safe work permits, Prepared equipment for E/I maintenance repair-P/M, LOTO isolation block/bleed. Monitored unit rundown/charge pumps, tanks, & process lines. Lined up to pump crude, gas oils, naphthas, finished gasoline, avjet, & Sour H2O tank to tank transfers, reacted to emergency unit processing due to power outages, pump failures, unit upsets, & unit turnaround re-routing procedures, slop management specialist, hand gauge tanks, field rated/computerized DCS tank rates for stops. Crack-in new product for unit charge. Checked auto to enraf, radar A & B in field, ensured console gauges are accurate in unit control-room., monitored martin gate ditch valves, line leaks, tank vapor recovery system, coordinated with daily maintenance contractors for equipment maintenance, safety watch for outside gauger, sample puller. Rail car truck rack trained. Lin-ups for Terminal crude & pipeline & VGO, GSO, Crude movements. Pulled samples, measured tanks for water cuts. Slop/Brine H2O.

09/05-07/07 Shell Oil Company 2101 E. Pacific Coast Hwy. Wilmington, Ca. 90744-2914 Pumper III/Operator - RP&S Department. Field operator monitored safe Terminal crude & pipeline & VGO, GSO, Crude movements. Pulled samples, measured tanks for water cuts. Slop/Brine H2O. for E/I maintenance repair-P/M, LOTO isolation block/bleed. Monitored unit rundown/charge pumps, tanks, & process lines. Lined up to pump crude, gas oils, naphtas, finished gasoline, avjet, & Sour H2O tank to tank transfers. Reacted to emergency unit upsets, slop management.

Education:

08/99-03/00 Long Beach City College 1305 E. Pacific Coast Hwy. Long Beach, Ca. 90806 Welding Technology- (Cont Studies) 04/97-05/97 The Boeing Company 3855 N. Lakewood Blvd. Long Beach, Ca. 90808 K5M- Interior Aircraft mechanic (Cert.) 06/89-09/89 U.S. Army 8th Infantry Division Baum holder, Germany. PLDC - (Leadership Certification) 09/82-05/86 Bryan High School 3450 Campus Dr. Bryan, TX. 77802 General Studies- (Diploma) Summary: The above information is only a brief description of my skills and qualifications, nevertheless I am very confident that any company will agree that I will be an excellent asset and addition to their team, references are available upon request

Contact this candidate