Automation & Process Control Specialist with 15+ Years Experience

Subrata Pramanik

Email: **********@*****.***,

Phones: +91-882*******

Presently I am working in the Industrial Automation sector with 15 years of experience. Accomplished Design verification, product selection Project co-ordination and successfully Commissioning of Steel Plants, Plate Mill and Cement Plant. SUMMARY AND PROFILE

● Worked on Siemens Automation systems in different projects.

● Worked on PLCs, SCADA, HMI, and networking them in an Industrial Automation system using various communication protocols that include ProfiBus, Profinet, Modbus, IEC61850 and Ethernet.

● Worked on applications such as

(I) Siemens - STEP 7, WinCC Explorer, WinCC Flexible, TIA Portal, PCS7, SIMATIC BATCH.

(II) STARTER, SIMOCODE ES, Drive Monitor,

● Have the patience to listen to advice and suggestions for self-improvement. A good listener, hardworking, willing to take responsibilities.

● Flexible and adapt quickly to new working environments. PROFESSIONAL EXPERIENCE

Assistant Manager (Automation) Project in M/s Carl Bechem Lubrication Technology from 24/11/2020 to till date.

● Verification and approval of Vendor drawings as per required scheme

● Selection and design of the Scheme for the electrical and PLC panel as per the requirement.

● Commissioning and servicing of SIEMENS PLC S7-300, 400 and VFD's SINAMICS S120, G120 for various process application for Steel Plant, Cement Plant, Paper plant.

● Logic development according to SRS, Safety interlocks, alarm/fault messages, event message display, trends and archive configuration. User screen development on SCADA.

● Pre-commissioning and commissioning of automation system.

● Conduct FAT with the customer, commissioning the Hardware/software at the site.

● Attended service visits on S7 PLCs S7 PLC's, VFD's in various industries.

● Interaction with customer for collection of project requirement.

● Onsite and offsite Customer Support.

PROJECTS HANDLED:

Erection and commissioning of 20000T per year plant with SIMATIC PCS7 and SIMATIC BATCH. Senior Project Engineer in M/s ACTEMIUM INDIA PROCESS (Vasundhara Automation Engg. Services) from 12/04/2016 to 31/08/2020.

● Verification of drawings and discussion with clients for the approval of drawings.

● Design and engineering of panel based of various application and equipment requirement.

● Commissioning and servicing of SIEMENS PLC S7-300, 400 and VFD's SINAMICS S120, G120 for various process application for Steel Plant, Cement Plant, Paper plant.

● Logic development according to SRS, Safety interlocks, alarm/fault messages, event message display, trends and archive configuration. User screen development on SCADA.

● Pre-commissioning and commissioning of automation system.

● Conduct FAT with the customer, commissioning the Hardware/software at the site.

● Attended service visits on S7 PLCs S7 PLC's, VFD's in various industries.

● Interaction with customer for collection of project requirement.

● Onsite and offsite Customer Support.

PROJECTS HANDLED:

POWER EVAGUATION SYSTEM and ENERGY MONITORING SYSTEM Automation Platform : Siemens SIMATC S7-1500 PLC

Features : TIA Portal V13 SP1, WinCC SCADA v7.4, Server client, redundancy and reporting

Client : M/s SANDUR MANGANESE AND IRON ORE Pvt. Ltd., Project Site : Hospete, Karnataka,

Scope of work : Commissioning of 110kV, 11kV substation and FURANCE control logic as per customer requirement.

Commissioning of 110kV control and relay panel, Upgradation of switchyard, replacement of 11kV switchboard for Sub-station and FURNACE-1,3 and 5. Commissioning of Furnace 3-5 control logic as per requirement by customer and Energy monitoring system for substation and Furnace-1,3,5. Commissioning of PCC, MCC, VFD, soft-starter, MLDB, LDB panel. Communication with HT Relay and 3rd- party PLC and soft-starter through TCP/IP protocol. Development for automated plant lighting system, Automatic DG-GRID synchronization during power failure. CEMENT PLANT and ENERGY MONITORING SYSTEM

Automation Platform : Siemens SIMATIC S7-400 PLC

Features : PCS7 V8.2 SP1, WinCC SCADA v7.3, Server client, redundancy, SIMOCODE ES Client : NATIONAL CEMENT COMAPANY, SIMBA CEMENT

Project Site : Uganda, Africa

Scope of work : Commissioning Cement and packaging plant control logic as per customer requirement.

Commissioning of PMCC, IMCC with Simocode Compressor, 10kV, HT Panel with 3500kW, 560kW of 2nos., 210kW HT motor for Grinding Unit and Packing Plant. Communication with PLC and SIMOCODE through profibus protocol and field instruents i.e., transmitters, sensors though Modbus protocol and 3rd-part controller though TCP/IP protocol.

CEMENT PLANT

Automation Platform : Siemens Simatic S7-400 PLC, S7-200PLC, SINAMICS G120 Features : PCS7 V8.2 SP1, SIMOCODE ES, STARTER V4.4 Client : HIEDELBERG Cement, CIMTOGO, CIMBENIN

Project Site : TOGO, BENIN, Africa

Scope of work : Commissioning Cement and packaging plant control logic as per customer requirement

Commissioning of PMCC, IMCC with Simocode Compressor. Communication with PLC and SIMOCODE and VFD Sinamics G120 through profibus protocol and field instruments i.e., transmitters, sensors though Modbus protocol and 3rd-part controller though TCP/IP protocol KARBANA REACTOR PLANT

Automation Platform : Siemens SIMATIC S7-300 PLC, SINAMICS S120, G120 Features : SIMATIC S7 V5.5, STARTER V4.4

Client : JINDAL STEEL WORKS, SMS- 1 & 2

Project Site : Vijayanagar, Karnataka

Scope of work : Commissioning KR plant control logic as per customer requirement Commissioning of KR plant. Communication with PLC and SIMOCODE and VFD Sinamics S120, G120 through profibus protocol and field instruments i.e., transmitters, sensors though Modbus protocol and 3rd-part controller though TCP/IP protocol.

CHIPPER PLANT AND COAL PLANT

Automation Platform : Siemens SIMATIC S7-300 PLC, SINAMICS S120, G120 Features : SIMATIC S7 V5.5, STARTER V4.4

Client : ITC Paper and Board

Project Site : Bhadrachalam, Telengana

Scope of work : Commissioning KR plant control logic as per customer requirement Commissioning of KR plant. Communication with PLC and SIMOCODE and VFD Sinamics S120, G120 through profibus protocol and field instruments i.e., transmitters, sensors though Modbus protocol and 3rd-part controller though TCP/IP protocol.

Worked as a Project engineer in M/s Esskay Services, TTC industrial area, Technocity, Mahape, Navi Mumbai, India-400710, from 20th July, 2015 20th March, 2016. The responsibilities are design and Commissioning, trouble-shooting of SIEMENS Drives as per the requirements and provide the engineering support to the client as per the requirement.

PROJECTS HANDLED:

Jindal Steel and Power Limited - Angul

● Commissioning and tuning of Double Side Trim shear in the Plate Mill. The project was done under the supervision of PRIMETAL U.K. and the Machine was commissioned as per the PRIMETAL U.K. logics. The proper co-ordination with PRIMETALS engineer for the timely finish of the project.

● SIEMENS SIMOVERT VC Drives of 110kw of 7nos for 5 group each group has 17nos of motor.

● Features : DRIVE MONITOR V5.5

● Project Site : Angul, Odisha

Bokaro Steel Plant- Bokaro

● Commissioning of the Siemens SINAMICS drives of 10nos. in the Hot dip galvanizing line. The fault rectified and the drives tuned as per the client requirement and logics. The project was done under the supervision of PRIMETAL U.K. and the Machine was commissioned as per the PRIMETAL U.K. logics

● SIEMENS SINAMICS S120 Drives of 160kw of 10nos

● Features : DRIVE MONITOR V5.5

● Project Site : BOKARO.

Worked as an Electrical Engineer in Balaji Paper and News Print Pvt. Ltd. Manikpara, Jhargram, West Bengal, from 17

th

January, 2011 to 02

nd

June, 2015. The responsibilities are Maintenance of Unit -1 and 2, Di-Inking Plant and Effluent Treatment Plant. Job Responsibilities:

● Maintenance of a 60TPD Paper Machine # 1, De-inking Plant and Effluent Treatment plant.

● Complete Design, Procurement, Erection and Commissioning of Electrical Equipment for a 150TPD Paper Machine #2 and up-gradation of existing De-inking Plant from 60TPD to 180TPD.

● Commissioning of SIEMENS S7-400 PLC for the Process and VFD.

● Commissioning of the 150TPD Paper Machine #2.

● Maintenance of 150TPD Paper Machine #2.

● System consists of Siemens S7-400, S7-300, SINAMICS S120, G120, SIMOVERT VC Master Drives, Allen Bradley 1336 Plus Drives, ABB ACS550, ACS 800, Worked in J.B.S. Pvt. Ltd. There I have been working in a 220/66/11KV Substation Kharadpara, Silvassa, Dadra Nagar And Haveli for Operation & Maintenance as Shift Engineer from July 2010 to November 2010.

Job Responsibilities:

● Hourly monitoring of the incoming and the outgoing loads of the 220kV side, 66 kV side and 11 kV side.

● Monitoring the running loads on each Transformer of 100MVA 2 nos. and 50 MVA 1no. of 220/66 kV and 20MVA 1no. and 15MVA 2nos.

● Monitoring loads for the 66-kV line and 11kV line. EDUCATIONAL QUALIFICATION

● B.Tech in Electrical and Electronics Engineering, from Bharath University, Chennai with CGPA of 6.87.

● Passed Class – XII (ISC) from St. Thomas High School, Dasnagar, Howrah, West Bengal with 57%.

● Passed Class – X (ICSE) from St. Thomas High School, Dasnagar, Howrah, West Bengal with 55%.

TRAINING CERTIFICATIONS

Completed courses on the following:

SIMATIC PCS7, SIMATIC BATCH, SIEMENS SITRAIN, Brussels, Belgium.

SIMATIC PCS7 Basic ON AS and OS, Mumbai.

SIEMENS PLC S7-300 SIEMENS SITRAIN Mumbai.

Basic SIEMENS Sinamics Drives S-120 and G-120 from SIEMENS SITRAIN, Mumbai.

Process Automation and Control Education (PACE) from Vasundhara Automation & Engineering Services Pvt. Ltd, Bangalore.

Advance course on SIEMENS Sinamics Drives S-120 with STARTER V4.5 from SIEMENS SITRAIN, Mumbai

SIMOTION SYSTEM and PROGRAMMING with SCOUT V5.1 from SIEMENS SITRAIN, Mumbai. TECHNICAL SKILLS

● Software: SIMATIC BATCH, SIMATIC PCS 7, SIMATIC WinCC SCADA, Siemens STARTER SCOUT, SIMOCODE ES, Drive Monitor, V-assistance, Reydsip Evolution (ABB)

PERSONAL PROFILE

Date of Birth : 22/07/1987

Languages known : English, Bengali and Hindi.

Permanent address : S/o. Ajoy Kr. Pramanik, Sastitala Kona Road, Santragachi, Ramrajatala, Howrah, West Bengal, Pin code – 711104

Present Address : B1-1202, BDA Indraprastha, Harsha layout, kengeri satellite town, Bangalore 560059

Present CTC : Rs. 14 LPA

Expected Salary : As Per industry standards

DECLARATION

I hereby declare that the above-mentioned information is correct up to my knowledge and I bear the responsibility for the correctness of the above-mentioned particulars. Date:12/09/2025 Subrata Pramanik

Contact this candidate