Maintenance Supervisor & Industrial Electrical Technician

RICKY PABILA DIANON

Address: Blk ** Lot ** Centerra, Brgy. Gulod, Cabuyao, Laguna

Contact No.: +639********* / +639*********

Email add: **********@*****.*** / ********@*****.*** Summary

More than 20 years’ experience in the technical field including industrial, manufacturing, after sales and building facilities & maintenance companies. Prior in the field of electrical, electronics, mechanical, hydraulic, pneumatic, automation, PLC, motor control system, etc. Also, included in the experience in supervising and handling people, scheduling, technical analysis and implementation, energy savings program, EHS program, office works and reporting.

• Five years experienced as a Maintenance Supervisor in an ISO & EMS certified manufacturing company. Maintenance planning, analysis and implementation such as; preventive and corrective maintenance. Compliance with the standard of the implementing bodies, technical reporting, and other supervisory office work. Handling and training people, implementing standard maintenance procedures and safety awareness of the maintenance personnel. Also practicing as Safety Officer and Pollution Control Officer, submit a compliance requirement for government implementing bodies like, DOLE, BFP, and DENR/LLDA.

• Ten years’ experience as hands-on Electrical Technician or Industrial Mechanic in manufacturing, industrial, and heavy equipment companies including technical support services.

In industrial and manufacturing companies, experienced in maintenance, repair, troubleshooting, and installation. Experienced in Electrical wiring and installation, motor control (VFD/VSD), PLC (Mitsubishi, Allen Bradley, Omron), Hydraulic and Pneumatic, Plumbing, some civil works, etc. Experienced in Plastic and rubber molding injection machine, injection and blowing machine, extrusion machine, compression machine, dryer, chillers, screw compressor, Generator set, press machine, lathe machine (conventional), basic welding

(arc welding), etc… Also experienced in Testing and commissioning of electrical equipment’s such as; Generator set, ATS (automatic transfer switch), TVSS (transient voltage surge suppressor), ATF (active tracking filter) for plc protector.

In Heavy Equipment’s and Agricultural company performing breakdown analysis, repairing,

troubleshooting and maintenance of such; Iveco, Perkins, Caterpillar generators including CLAAS Balers, Excavators, Forklifts, Tractors, and any other agricultural and construction equipment and machines.

• More than Five years experienced in building facilities maintenance and BMS.

In Electrical; From High and Medium voltage (11KV) to Low voltage (220 V) power distribution, from main distribution board up to sub distribution board switchgear operation, including emergency powers like Generators, UPS, Battery Banks and ATS (automatic transfer switch) operations and maintenance. Also, Lightings and controls, Fire Alarm system, and other low voltage equipment’s.

In Air Conditioning or HVAC system such as: Chiller, Package/Split/Window type air condition, Air Handling Units, Fan Coil Units, etc. operations, maintenance, repair and troubleshooting.

Also, other facilities and machines like Fire pumps, Pumps, Motors and Controls (MCC), Fans, Wastewater Treatment, Air Compressor, Cooling Tower, Heat Exchanger, etc. Work Experience:

Position: Facilities and Maintenance Assist Mngr. Name of Company: Janoschka Phil’s., Inc. Address: Brgy Santo Tomas, Binan, Laguna, Phil’s. Years: May 5, 2025 – Present Job Duties and Responsibilities:

Responsible for all the machines’ conditions; Production and Facilities machines and equipment. Create a PMS plan; weekly, monthly, quarterly, annually.

Lead the machine trouble shooting and repair of electrical, mechanical, hydraulic, PLC and controls.

Mentoring and lead the technician task and accomplishment.

In charge of the machine parts inventory and availability.

Responsible for assisting, reviewing, and validating contractor’s job.

Measure the MTTR/MTBF and machine efficiency vs production output target

Submit and report KPI monthly

Position: Facilities and Equipment Team Lead Name of Company: Varex Imaging Phil’s. Inc. Address: Brgy. Santo Tomas, Binan, Laguna, Phil’s. Years: Jan 8, 2024 – May 5, 2025 Job Duties and Responsibilities:

Responsible for all production equipment and machines condition. Responsible in all building facilities equipment’s condition.

Create Periodic PMS plan using the system.

Lead all equipment’s trouble shooting and repair

In charge of spare parts management.

Assist, review, and validate contractor’s job.

Mentoring and lead the technician task and accomplishment.

Report submission; daily, weekly, monthly and KPI

Position: Maintenance Supervisor/ PCSO Name of Company: Janoschka Phil’s., Inc. Address: Brgy Santo Tomas, Binan, Laguna, Phil’s. Years: Dec 6, 2021 – Aug 6, 2023 Job Duties and Responsibilities:

Responsible for all the machines’ conditions; Production and Facilities machines and equipment. Create a PMS plan; weekly, monthly, quarterly, annually.

As Pollution Control and Safety Officer, make programs and implement in the company. Submit compliance report to DENR/LLDA (SMR/CMR), DOLE (FSCR), BFP (RSO/WAIR)

Lead the machine trouble shooting and repair of electrical, mechanical, hydraulic, PLC and controls. Mentoring and lead the technician task and accomplishment.

In charge of the machine parts inventory and availability.

Assist, review, and validate contractor’s job.

Position: Sr. Maintenance Supervisor/ PCSO Name of Company: Zhong Fu Unimagna Phil’s., Inc. Address: Balibago Sta. Rosa, Laguna, Phil’s. Years: March 2017– Dec 6, 2021 Job Duties and Responsibilities:

In Plastic Injection Molding Company, assigned as a Production Maintenance Sr. Supervisor

Responsible for the condition of all machines in production, responsible preventive maintenance plan, analyzing root cause of production rejection and providing ideas for productivity improvement.

Lead and mentor all maintenance personnel

Study and upgrade machines operation and report to the Business Unit Manager.

As Pollution Control and Safety Officer, make programs and implement in the company. Submit compliance report to DENR/LLDA (SMR/CMR), DOLE (FSCR), BFP (RSO/WAIR).

Position: High Voltage Tech’n. & Facilities Coordinator Name of Company: AlTaif Technical Services Address: Zayed Military City, Abu Dhabi, UAE Years: October 2015 – Jan 2017 Job Duties and Responsibilities:

Assigned in Facilities department to maintain and monitor the substation and emergency power like Genset.

Performed repair and rectification of electrical system problems, carry out the corrective and planned preventive maintenance of all the buildings maintained by the company such as; HV (11KV) to LV (220V) power distribution, switchgear, generators, control panel, UPS, lightings, small power, MCC, pumps, motor, and other associated in electrical system.

Monitor and inspect contractor for the ongoing project update

Reporting to the Facilities Engineer

Position: Electrical Technician Name of Company: Serco Ltd. Address: Abu Dhabi, UAE Years: April 2014 - Sept 2015 Job Duties and Responsibilities:

Assigned to Cleveland Clinic Abu Dhabi as electrical technician in Facilities department. Reporting to the section supervisor

Performed repair and rectification of electrical system problems, carry out the corrective and planned preventive maintenance on the electrical services and systems such as; lighting, small power, switchgear, motors, pumps, fans, control panels, emergency power, UPS, Battery Bank, BMS, instrumentation, and other associated in electrical system.

Position: Maintenance Supervisor/Safety Officer Name of Company: JF Rubber Phil. Inc. Address: Carmona, Cavite, Philippines Years: June 2012 - March 2014 Job Duties and Responsibilities:

In ISO and EMS certified manufacturing company, supervising all the maintenance job inside manufacturing company in both production and facilities. Implement the Safety policies and programs of the company, submit safety compliance to BFP/DOLE. Report to the Manager and submit the monthly KPI.

Responsible for such as electrical, electronics (automation or PLC), mechanical, hydraulic, and pneumatic repair and troubleshooting, planned preventive and corrective maintenance, data and analysis of all machines in production such as; injection, compression, vacuum machines.

Responsible for all facilities, equipment and machines such as; powerhouse, generator set or emergency powers, air compressor, cooling towers, water treatment, pumps and motors, air conditioning system, plumbing, general trades and fire alarm system.

Position: Electrical Technician Name of Company: Etisalat Facilities Mngt. Address: Abu Dhabi, UAE Years: March 2011 - April 2012 Job Duties and Responsibilities:

In building facilities maintenance, perform repair, rectification and preventive maintenance of all facilities concerning electrical of the building through MAXIMO software. Reporting to the department supervisor.

Perform job in electrical distribution board, blower, motor, pump, fire pump, generator, lightings, and any other related to electrical job.

Position: Service Electrician Technician Name of Company: Aljomaih Holdings Co. Address: Jeddah, Kingdom of Saudi Arabia Years: Oct 2008 - Sept 2010 Job Duties and Responsibilities:

In Industrial and Agricultural equipment and machine supplier and servicing, performed the job in technical support as Leader Technician. Report to the service supervisor.

Performed commissioning, set up the parameters program of controllers, set-up voltage and frequency changing as per customer requirements, conduct load testing, pre-delivery inspection, troubleshoot, repair, and maintenance of such Iveco and Perkins generator set (from 25 to 2000 KV).

Also, perform troubleshooting, repair, maintenance, and pre-delivery inspection of such; CLAAS Baler for agricultural, and heavy equipment’s such as; Grader, Excavator, Forklift and Tractors and others.

Perform customer technical training and orientation of the product or equipment.

Position: Service Electrician Technician Name of Company: FMIDC Address: Makati, Metro Manila, Philippines Years: Jan 2007 - Sept 2008 Job Duties and Responsibilities:

In Industrial electrical equipment supplier and servicing, performed the job in technical support as Leader Electrical Technician. Report to the department Manager.

Perform testing and commissioning, installation, troubleshooting, repair, and maintenance of ATS (Automatic Transfer Switch), TVSS (Transient Voltage Surge Suppressor), and ATF (Active Tracking Filter) system which is the main customers are all Coca-Cola plant, and some Call center companies such as Convergys and Teletech.

Position: Facilities Technician Name of Company: Terumo Philippines Corp. Address: Laguna Technopark, Laguna, Philippines Years: Aug 2006 - Jan 2007 Job Duties and Responsibilities:

In Japanese medical equipment manufacturing company, performed the job as Shifting Facilities Electrical Technician. Reporting to the department supervisor.

Perform facilities machines and equipment’s monitoring, operating, troubleshooting, and preventive maintenance such as air-cooled chiller, air compressor, air handling unit, cooling tower, generator, motor, pumps and others. Also, including assisting the contractors to implement safety job practices.

Position: Electrical Technician Name of Company: Sonic Steel Industries Inc. Address: Trecemartires, Cavite, Philippines Years: April 2004 - June 2006 Job Duties and Responsibilities:

In galvanize steel coating company, performed the job as production Shifting Electrical Technician. Reporting to the department supervisor.

Performed monitoring, operating, troubleshooting, repairing, and preventive maintenance of such as; VFD

(variable frequency drive), powerhouse and generators, inductors, motors, limit switches and sensors, PLC

(Programmable Logic Control), UPS and battery bank, and any electrical machines and equipment used in production area. Also, responsible for safety matters in working area.

Position: Maintenance Technician Name of Company: H & E Manufacturing Corp. Address: Paranaque, Metro Manila, Philippines Years: Oct 2003 - March 2004 Job Duties and Responsibilities:

In plastic injection manufacturing company, performed as a production shifting Technician. Report to the department supervisor.

Performed monitoring, troubleshooting and repairing, and preventive maintenance of such as; Injection, Extrusion and Blowing machines, Cooling Tower, Chiller, and other machines and equipment’s use in production area. Also, responsible for product quality and output, and safety matters in working area.

Trainings and Seminars:

o Basic hydraulic, mechanical and electronics training for heavy and agricultural equipment’s: Nov 15, 2008 – Dec 18, 2008

o Basic Training Course for Pollution Control Officers (PCO) June 26-29, 2018

o Basic Occupational Safety and Health Course (BOSH) Sept 11-14, 2018

Education

College: University of Negros Occidental – Recoletos Course: Bachelor of Science in Electrical Engineering Bacolod City, Philippines. SY 2002-2003

High School: Our Lady of Sorrows Academy

Hinoba-an, Negros Occidental. SY 1990-1994

Elementary: Bilbao Watkins Elementary School

Hinoba-an, Negros Occidental. SY 1984-1990

Personal Data

Birth Date: 31 July 1977

Age: 49 yrs old

Birthplace: Cagayan De Oro City

Civil Status: Nationality: Height: 5’5” (165.2 cm) Weight: 67 kgs (368 lbs)

Religion: Members Church of God International (MCGI) Character References

Name: Marivic Colligado Name: Maribel Marmeto

Profession: Production Manager Profession: HR Manager Company: Varex Imaging Phils. Inc Company: Janoschka Phils. Inc Contact No.: 091******** Contact No.: 099********

I certify that the above information is true and correct as per the best of my knowledge. Ricky Dianon

Contact this candidate