Quality Assurance & Supplier Management Professional

JEREMIAH RUMIAS

***** ******* ****** ****** ******, Ca 92555

E-mail: **************@*****.***

Cell: 951-***-****

OBJECTIVE: To seek employment from an established organization where I can enhance my knowledge and skills that will be contributory to attain company goals. TECHNICAL SKILLS: Word, Excel, Access, Power Point, Point, Outlook, CATIA, Measurement System Analysis MSA, Analysis of Variance ANOVA, Process Failure Mode Effect Analysis, DFMEA,PFMEA, PPAP, PMBOK, Design of Experiments DOE, QA Software, CMM PC DMIS Software, ISO 9000-9001/ ISO13485, Pareto Chart, Histogram, Six Sigma Green Belt Level, 5 why, Root Cause, Fish Bone, SPC, Solid Works, Advance Product Quality Planning APQP, 8D,6S, ASQ Quality Auditor, Metallurgical and Automotive. WORK EXPERIENCE:

Embraer Executive Jets 1205 General Aviation Drive Sept 2022 – Presents Melbourne, FL 32935 USA

Supplier Relationship Manager (West Region)

● Establish strong, collaborative relationships with key internal and external stakeholders to strategically develop, implement and optimize supplier management process, tools, and policies to achieve performance objectives and mitigate risk.

● To act as on-site liaison between Embraer and suppliers, conducting audits, verification, and gathering status updates on critical parts/components.

● To initiate and lead continuous improvement activities, incorporating Lean and P3E processes.

● To maintain financial acumen by developing and achieving budget targets in cooperation with Embraer procurement department.

● Audits methods/efficiency of suppliers’ management of their sub-suppliers’ abilities to guarantee production flow and deliveries.

● Visits supplier’s sub-tiers to help address their issues when deemed necessary.

● Proposes alternatives, improvements and resolutions for spare parts issues that may be affecting Embraer’s profitability and/or capacity to comply with commitments.

● Interacts with supplier’s and Embraer’s teams to coordinate and follow up on the investigation of technical issues, identification of appropriate solutions, and ensuring quality in the delivery process to Embraer and its customers.

● Proposed alternatives, improvement and resolutions for spare parts issues that may be affecting Embraer’s profitability and/or capacity to comply with commitments.

● Interacts with Supplier’s and Embraer’s teams to coordinate and follow up on the: investigation of technical issues; identification of appropriate solutions, and ensuring quality in the delivery process to Embraer and its customers.

● Promotes integration, enhances communication and mediates conflicts between supplier’s and Embraer’s team.

● Provide weekly written and daily verbal reports on findings and action plans.

● Support the analysis of supplier key performance indicators.

● Follows up on raw materials, components and spare parts production process and delivery, based on schedules provided by suppliers, verifying and evaluating services regarding vendor’s ability to deliver ordered quantities on schedule time and agreed quality level.

● Oversees material movements throughout manufacturing and inventory sequences.

● Maintains internal/external contacts, providing and/or obtaining information.

● Analyzes several operational, technical and administrative matters related to parts supplies.

● Verifies items ordered, compares with Brazil’s forecast/schedule/orders.

● Audits materials and analyzes/evaluates quality of area services, as well as contract clauses and late deliveries.

● Discusses and negotiates corrective plans and procedures with suppliers, implementing alternative problem solutions.

● Follows up on performance and applies corrective measures to detect problems.

● Provides regular written and verbal reports on observations, findings and action plans agreed with vendors as well as on plans implementation.

● Interacts with Supplier and Embraer teams to coordinate the investigation and solution of technical issues reported by field operations, Embraer or by suppliers. JEREMIAH RUMIAS

13616 Donegal Street Moreno Valley, Ca 92555

E-mail: **************@*****.***

Cell: 951-***-****

West Coast Foundry, LLC 2450 East 53rd St

May 2019 – Aug 2022 Huntington Park, Ca 90255

Quality Assurance Manager

● Train direct-report employee(s) on safety rules, and ensure compliance.

● Maintain Process Parameters database and issue Casting Job sheets for daily runs.

● Facilitate the analysis of product scrap, documenting causes and preventative actions.

● Coordinate the dissemination of product and process quality data for other departments to insure appropriate information flow, via Reports, Visual Management Boards, etc.

● Supervise Sand Lab and oversee sand testing. Monitor the molding sand properties and equipment through the Historian database. Report on issues.

● Serve as the technical resource on molding sand and its components. Oversee the composition of the molding sand to maximize properties.

● Oversee metallurgical properties including sampling, compilation of chemical and physical data, analyzing results, reviewing for trends and preparing summary reports for managers.

● Lead other departments on process and material improvements. Arrange for sample materials to improve process or reduce cost. Coordinate with other departments to establish basic process control parameters for molding and melt. Create and implement inspection and testing criteria or procedures.

● Collect and analyze production samples and/or photos to evaluate quality.

● Verify that raw materials, purchased parts or components, in-process samples, and finished products meet established testing and inspection standards.

● Confer with Customer Service and Sales departments to define client requirements and expectations.

● Participate in the development of product specifications. Ensure compliance with customer quality requirements.

● Provide input to Advance Sales Engineers for any customer quality issues, whether external or internal.

● Track defects, test results, or other regularly reported quality control data.

● Identify quality problems or areas for improvement and recommend solutions.

● Serve as liaison for technical advancements with corporate and other groups

● Facilitate product testing at off-site labs such as load testing and x-rays.

● Support advances in green sand molding, and keep abreast of industry advancements through the American Foundry Society and other related sources.

● Produce reports regarding nonconformance of products or processes, daily production quality, root cause analyses, or quality trends. Collect, analyze, and summarize information and trends. Document testing procedures, methodologies, or criteria.

● Other duties as needed or assigned to support management. VSC Verify, Inc 2525 Main Street, Suite 100

July 2014 – Apr 2019 Irvine, CA 92614

Supplier Quality Manager

● Maintaining and improving the quality system, assuring standards and activities are in line with the philosophy of the company and Risk Management.

● Assist in defining the validation strategy and test methods to support equipment and product transfers. Identify required equipment and maintain equipment status in Product Verification test lab

● Maintain and manage CAPA process including oversee process line audits Manage product verification and product release

● Identify quality assurance resource requirements and manage deployment of resources to provide coverage for ongoing production activities and Implement an effective production line audit program

● Manage personnel ensuring growth and professional development and knowledge of the FAA’s Quality System Regulations; experience working within a Quality Management System and also Demonstrating experience prioritizing conflicting demands in an extremely fast paced environment

● Strong problem solving, influencing and negotiation skills, ability to work well as a leader, independently and in a team setting

JEREMIAH RUMIAS

13616 Donegal Street Moreno Valley, Ca 92555

E-mail: **************@*****.***

Cell: 951-***-****

● Organizing, performing, and/or witnessing failure analysis Conducting metallurgical investigations relating to process control and product development Providing material recommendations for research and new product development and to meet customer and/or industry requirements

● Assisting with selection of materials/coatings for performance in various drilling environments Developing and maintaining internal specifications for raw materials, heat treatment, surface treatments, and others to assure compliance with applicable industry standards and best practices

● Establishing and approving specifications and techniques in the areas of materials, welding, heat treating, processing, coating, and non-destructive testing Providing technical expertise for issues associated with the engineering, procurement, and use of castings, forgings, and weldments.

● Assisting material/product analysis including preparation of samples and analysis of results while disposition of material on non-conformance issues writing accurate and persuasive technical reports detailing cause and corrective actions associated with analysis of data. Beckman Coulter, Inc 4300 North Harbor Boulevard

Feb 2010 – June 2014 P.O. Box 3

Metallurgical Quality Engineer Fullerton, CA 92834

● Assisting with the preparation of Quality Engineering cost estimates, justification, and task descriptions for a company proposal on lean manufacturing process and reduce cost.

● Assist with directing the quality elements of the manufacturing process with medical devices. Planning includes reviewing the contract, drawings, specifications, regulatory and government standard, and company procedures. Ability to anticipate the expectations and needs of the organization in order to take a proactive approach in completing projects and problem recognition/solving with raw material control.

● Strong ability to read, establish and interpret quality specification, including GDT nomenclature, material composition, proper handling and disposition of product with experience of supplier audit.

● Technical Representatives receive all of the tools and training necessary to inspect, repair, and maintain mechanical and electrical components of our binding and laminating equipment

● Able to exercise independent discretion and solve complex problems and perform effectively with all levels of the organization and handle confidential information with professional demeanor and discretion.

● Work effectively on cross-functional teams to define appropriate pre production processes pertaining to quality.

● Is adept at all aspects of change management so that internal improvement processes result in stable effective migration of performance while meeting daily business needs.

● Troubleshoot and improve production processes investigate and implement alternate processes to improve yield, reduce scrap, etc using six sigma techniques.

● Provides strategic direction for organization in terms of Operations Quality functions including supplier quality, logistics & distribution, design, and risk policies.

● Functions as the technical liaison and ensures harmonization of the Corporate quality operations processes between Corporate and global Sites/Business Units in terms of global policies, best practices, improvement initiatives, and with respect to Compliance concerns. Flexible Metal Hose Corporation 4312 Redland Blvd

Mar 2000 - Feb 2010 Irvine, CA 92754

Quality Control Inspector

● Receiving inspector such as raw material and sub- contracted machined parts and validate their dimensioning tolerancing mechanical devices chemical properties to verify compliance to customer and internal technical requirements.

● Inspection measures and documents critical tolerance dimensions and machined parts during manufacturing process to verify compliance to customer technical documentation with final inspection to be configured toward the end once manufacturing is complete.

● Control of measuring equipment to maintain accurate inventory of all cause and other measuring equipment and help manage there up to the date calibration status along with superior record keeping for auditing.

● Assisting QA engineers with blue prints creation, measurements, and to be demonstrated with the other inspectors including assemblers, shippers, and machinists to satisfy customers.

● Initiate Corrective/ Preventative action as required whether it is medical device parts or blueprints.

● Experience on ISO 9001-2000 ISO 13485, AS 9100-9102, First Article, Medical Analyzer, CATIA, Verisurf, Net Inspect, PC DMIS software

JEREMIAH RUMIAS

13616 Donegal Street Moreno Valley, Ca 92555

E-mail: **************@*****.***

Cell: 951-***-****

EDUCATION:

Devry University / Keller 2010 – 2015

3880 Kilroy Airport Way B.S. in Project Management Long Beach, Ca 90806

Santa Ana College 2003 - 2004

1530 West 17st Solid Works/ CATIA V5/ AutoCad Software Santa Ana, Ca 92626 Certifications

Orange Coast College 2002 – 2005

2701 Fairview Rd. A.S. Degree Engineering

Costa Mesa, CA 92626 Manufacturing

Costa Mesa High School 1997 – 2002

2650 Fairview Rd. Diploma

Costa Mesa, Ca 92626

CERTIFICATION:

*American Society For Quality ASQ Quality Management – 2012

*APICS The Association for Operation Management - Basic of Supply Chain Management – 2010

*Lean Six Sigma Black Belt Certification - 2019

*American Safety Health Institute – Basic Life Support (BLS) Standard First Aid, CPR and AED –2014

*Coastline Regional Occupational Program – Office Technology- Received-2002

*Project Management Institute PMI - 2013

Contact this candidate